Labshake search
Citations for Beckman :
1101 - 1150 of 1935 citations for 6H Pyrazolo 3 4 g benzothiazole 2 methyl 8CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2022Quote: ... Tagmented DNA was isolated using 2× SPRI Beads (Beckman Coulter) and amplified via PCR ...
-
bioRxiv - Microbiology 2020Quote: ... 3′ ligated RNA was cleaned by incubating with 2.5X volume of RNAClean XP beads (Beckman Coulter) and 1.5X volume of isopropanol for 15 min ...
-
bioRxiv - Neuroscience 2019Quote: ... and 3% Percoll (1 ml each) in Polycarbonate centrifuge tubes (13 x 51 mm; Beckman Coulter). The gradients were then centrifuged for 15 min at 18,700 rcf ...
-
bioRxiv - Cancer Biology 2020Quote: ... The cells were counted using the electrical sensing zone method (Multisizer 3, Beckman Coulter, Indianapolis, IN)
-
bioRxiv - Microbiology 2023Quote: ... 3′ ligated RNA was cleaned by incubating with 2.5X volume of RNAClean XP beads (Beckman Coulter) and 1.5X volume of isopropanol for 15 min before separation on a magnetic rack ...
-
bioRxiv - Cancer Biology 2024Quote: ... Caspase 3 and 8 activity (EGFP+ cells) was analyzed using the CytoFLEX Flow Cytometer (Beckman Coulter) and Flowjo v10 BD (Becton Dickinson ...
-
bioRxiv - Cell Biology 2023Quote: ... Cell density and sizing was measured with a Coulter counter (Beckman Coulter Multisizer 3, CA, USA). Raw cell diameter event counts were converted to relative frequency and visualized as ridgeline plots with the R tidyverse packages (https://tidyverse.tidyverse.org/ ...
-
bioRxiv - Cell Biology 2020Quote: ... Fractions were diluted with 2.5 ml sterile PBS and centrifuged for 30 min at 100,000 × g (43,000 rpm) in a TLA 110 rotor (Beckman, Optima TL100 centrifuge). These concentrated fractions were resuspended in 30 μl sterile PBS prior to further assessment by electron microscopy or RNA preparation for sequencing.
-
bioRxiv - Cell Biology 2020Quote: ... Samples were pelleted at 280’000 x g for 10 min at 25 °C in an Optima XP centrifuge with a TLA-100 rotor (Beckman-Coulter). Supernatant and pellet fractions were separated on a 10 % SDS-PAGE gel and proteins were visualized by Coomassie Blue staining ...
-
bioRxiv - Biochemistry 2019Quote: ... The gradients were centrifuged at 115 000 g for 17 hours in a swinging-bucket SW-55 rotor using an Optima LE-80K ultracentrifuge (Beckman Coulter). Gradients were then manually segregated into 30 equal fractions of 165 μl from the bottom using a peristaltic pump and analyzed for PrPSc content by immunoblotting.
-
bioRxiv - Microbiology 2019Quote: ... Then membranes were pelleted by ultracentrifugation at 49,000 x g for 1 hour using a TLA-100.3 rotor in an Optima TL Ultracentrifuge (Beckman Coulter, Indianapolis, IN), and the supernatant was collected for the soluble fraction ...
-
bioRxiv - Cell Biology 2020Quote: ... The polymerized microtubules were centrifuged for 30 min at 18000 x g in a Microfuge 18 Centrifuge (Beckman Coulter, Brea, CA) and the pellet was resuspended in BRB80 supplemented with 10 µM taxol (BRB80T).
-
bioRxiv - Biochemistry 2020Quote: ... to remove intact cells and the supernatant was centrifuged again at 25,000 g for 1 hour (Beckman Coulter JA- 20 rotor). The pellet was resuspended in lysis buffer and sodium cholate was added to a final concentration of 1% and stirred at 4°C for 1 hour ...
-
bioRxiv - Biophysics 2021Quote: ... transferred to 15 mL conical tube and centrifuged at 233 x g for 5 min at 22 °C using a swinging bucket rotor (Beckman Coulter). Pelleted cells were resuspended and washed once with 1x PBS (-CaCl2 ...
-
bioRxiv - Neuroscience 2019Quote: ... The gradients were centrifuged at 285 000 g for 45 min in a swinging-bucket SW-55 rotor using an Optima LE-80K ultracentrifuge (Beckman Coulter). Gradients were then manually segregated into 30 equal fractions of 165µl from the bottom using a peristaltic pump ...
-
bioRxiv - Cell Biology 2020Quote: ... The 1 ml concentrates were overlaid on top of the gradient, and centrifuged at 100 000 g (28 000 rpm, k-factor 266) in an Optima L-90K ultracentrifuge (Beckman Coulter) using an SW41 Ti rotor for 18 h at 4 °C with slow deacceleration ...
-
bioRxiv - Biochemistry 2022Quote: ... Post-3000 × g supernatants were transferred to ultracentrifuge tubes and further sub-fractionated using the Optima™ MAX Ultracentrifuge (Beckman Coulter) with a pre-chilled TLA 110 rotor (Beckman Coulter ...
-
bioRxiv - Developmental Biology 2021Quote: ... at 5,000 × g and then ultracentrifuged in a Beckmann optima XE with a SW 41 rotor (Beckman Coulter, Brea, CA, USA) at 100,000 × g at 4°C for 1 h ...
-
bioRxiv - Neuroscience 2021Quote: ... from the gradient were washed free of sucrose by dilution into 25 volumes of cold PBS (pH 7.4) and pelleted by ultracentrifugation at 150,000 × g (Beckman Ti 70 rotor) for 1 h at 4 °C ...
-
bioRxiv - Biochemistry 2021Quote: ... The reaction mixtures were incubated at room temperature for 15 min followed by centrifugation at 36000 x g using Optima TL benchtop ultracentrifuge (Beckman Coulter) for 15 min at 4°C ...
-
bioRxiv - Biochemistry 2022Quote: ... sucrose gradient and the RCII complexes were separated by ultracentrifugation (40,000×g,15 h) using an Optima XPN-90 Ultracentrifuge (Beckman Coulter, USA). The separated RCII/PSI fraction was collected and then washed repeatedly using the glycerol- and DM-free elution buffer and concentrated to 0.2 mg Chl/ml which corresponded to approximately 0.6 mg protein/ml.
-
bioRxiv - Biochemistry 2019Quote: A 150 L aliquot of the fibrillation sample was centrifuged for 60min at 100,000 x g (Beckman Coulter Optima MAX-XP) to precipitate the fibrils ...
-
bioRxiv - Cell Biology 2020Quote: ... The polymerized microtubules were centrifuged for 30 min at 18.000 x g in a Microfuge 18 Centrifuge (Beckman Coulter, Brea, CA) and the pellet was resuspended in BRB80 supplemented with 10 µM taxol (BRB80T).
-
bioRxiv - Systems Biology 2019Quote: ... were loaded on top of an 8 ml sucrose cushion (1.75 M sucrose in PEB) and centrifuged (18h, 90,000 g) using a Beckman Ti70 rotor (Beckman Coulter, Brea, USA). The resulting pellet was resuspended in 0.5 ml suspension buffer (200 mM Tris ...
-
bioRxiv - Cell Biology 2020Quote: ... The supernatants were collected and subjected to high-speed centrifugation at 100,000 × g for 1h (TLS-55 rotor, OptimaTMMAX Ultracentrifuge; Beckman Coulter, Germany). The supernatants (S100 ...
-
bioRxiv - Microbiology 2020Quote: ... the 4 tubes were centrifuged using JA-20 rotor at 43,000 × g for 1 hour and 30 minutes in Beckman coulter® Avanti j-26 xp (Beckman, France). The pellets of the 4 tubes were preserved at −80°C before transport and metagenome sequencing and analysis.
-
bioRxiv - Immunology 2021Quote: ... 6 mL of blood was layered on top and samples were centrifuged at 930 x g for 30 minutes at room temperature (RT) with no deceleration in an Allegra X-12R centrifuge (Beckman Coulter). The neutrophil layer was collected between the Histopaque layers and diluted in 4°C PMN buffer (0.5% BSA ...
-
bioRxiv - Cell Biology 2021Quote: ... the cell lysate after removal of cell debris at 850 g was first pelleted with an Optima MAX-XP Ultracentrifuge (with TLA-100 rotor, Beckman Coulter) at 35,000 rpm (47,265 g ...
-
bioRxiv - Physiology 2022Quote: ... Labeled vesicles were then washed in PBS and ultracentrifuged at 100 000 x g for 70 min (SW 40 Ti Swinging-Bucket Rotor; Optima L-100 XP Ultracentrifuge; Beckman Coulter). Next ...
-
bioRxiv - Molecular Biology 2024Quote: ... the fixed samples were subjected to sucrose cushion centrifugation (7,000x g for 20 min at 16 °C) using a swinging bucket rotor (Beckman, JS-7.5). Coverslips were recovered ...
-
bioRxiv - Bioengineering 2024Quote: ... Sonicated suspensions were ultracentrifuged at 58,000 x g for one hour using an Optima Max-XP Ultracentrifuge (Beckman Coulter; Brea, CA). The top 75% of the suspension was collected ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were ultracentrifuged at 180,000 × g (38,000 rpm) in a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter, k-factor 145) for 2 hours at 4°C ...
-
bioRxiv - Cell Biology 2024Quote: ... The polymerized microtubules were diluted in BRB80T and centrifuged for 30 min at 18000 x g in a Microfuge 18 Centrifuge (Beckman Coulter). After centrifugation the pellet was resuspended and kept in BRB80T at room temperature.
-
bioRxiv - Cell Biology 2024Quote: ... Microtubules and tau were incubated for 10 min at room temp and centrifuged for 30 min at 18000 x g in a Microfuge 18 Centrifuge (Beckman Coulter). After centrifugation the supernatant was separated from the pellet and used as the sample indicated by the ‘tau in solution‘ ...
-
bioRxiv - Microbiology 2023Quote: ... Archaella were precipitated from the supernatant at 142400 g using Beckman Coulter Opima XE-90 ultacentrifuge and the fixed-angle titanium rotor Type 45 Ti (Beckman Coulter). The tafi remained in the supernatant and could be precipitated either during many hours of high-speed centrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... The isopycnic centrifugation of DNA was performed with an initial CsCl buoyant density of 1.725 g mL-1 subjected to centrifugation at 177,000 × g for 36-40 h at 20 °C in an Optima XPN-80 ultracentrifuge (Beckman Coulter, USA). At the end of the centrifugation ...
-
bioRxiv - Biophysics 2023Quote: ... and concentrated by several washing steps in FBS-free Opti-MEM® and virus particles were concentrated by ultracentrifugation on a 60% (w/V) iodixanol cushion at 21°C (131,500 x g, 90 min, SW28 rotor, Beckman Coulter, Ireland) to a final volume of 1 mL ...
-
bioRxiv - Biochemistry 2023Quote: ... and the lysates were centrifuged at 100,000 ×g for 30 min in a Beckman 70.1Ti rotor (Beckman Coulter, CA, USA, #342184). The supernatant was loaded onto a DEAE Sepharose Fast Flow column (Cytiva ...
-
Expanding the toolbox for phycobiliprotein assembly: phycoerythrobilin biosynthesis in SynechocystisbioRxiv - Synthetic Biology 2023Quote: ... Ultracentrifugation was performed in a SW40 Ti swinging-bucket rotor at 130000 × g for 16 h at 20 °C (Optima L-80 XP, Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The UC step was an EV depletion step where the FBS was ultracentrifuged at 118,000 × g (Type 45 Ti rotor, 38,800 rpm, Beckman Coulter, Brea, CA) for 18 h at 4°C followed by a filtration step (0.22 μm) ...
-
bioRxiv - Cell Biology 2023Quote: ... This step was followed by centrifugation at 10,000 × g for 20 min to remove cell debris using the Allegra X-30R centrifuge (Beckman Coulter, USA). The supernatant was transferred to ultra-clear thin wall tubes (Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... The brains were homogenised using an Ultra-Turrax® blender and the lysates cleared by centrifugation at 112,000 ×g in TLA-55 fixed-angle rotor (Beckman Coulter) for 30 min at 4°C (i.e ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was separated and centrifuged for 2.5 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge and a Type 45 Ti rotor (Beckman Coulter, USA). The supernatant was discarded ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was separated and centrifuged for 3 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge with a Type 45 Ti rotor (Beckman Coulter, USA). The supernatant was discarded ...
-
bioRxiv - Plant Biology 2024Quote: ... The pre-concentrated culture was centrifuged (10000 g, 10 min) in 1-L buckets (Avanti J-265 XP, Beckman Coulter, USA). The biomass reached a concentration of approximately 40 % (dry weight - DW ...
-
bioRxiv - Microbiology 2020Quote: ... pH 7.4) and centrifuged at 182,000g for 1.5 h at 4°C (Beckman SW40). Then the lipid droplets on the top were collected and washed for further analysis.
-
bioRxiv - Systems Biology 2020Quote: ... pelleted at 3,709 xg for 4 min (Allegra X-30R, C0650 adaptor, Beckman Coulter), and resuspended in 50 mL of ice-cold deionized water (MilliQ Biocel A10 ...
-
bioRxiv - Cell Biology 2021Quote: ... at 4°C using the SW 55 Ti Swinging Bucket rotor (Beckman Coulter, 342194).
-
bioRxiv - Evolutionary Biology 2019Quote: ... centrifuged at 7500 rpm and 4°C for 20 minutes (J6-MI, Beckman Coulter), and sterilized using 0.2 μm syringe filters (Pall Life Sciences) ...
-
bioRxiv - Microbiology 2019Quote: ... The filtrate was centrifuged for 30 min at 4°C at 4300 rpm (Beckman Coulter X-14R centrifuge with an SX4750 swinging bucket) ...