Labshake search
Citations for Beckman :
1051 - 1100 of 1472 citations for N Furan 2 ylmethyl 3 bromo 4 fluoro benzamide since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: ... 20 mL of supernatant was gently layered on top of 10mL of 20% sucrose dissolved in PBS (4°C, sterile filtered) in an ultra-clear 1×3.5′ centrifuge tube (Beckman 344058). The tubes were spun down in a SW28 rotor (Beckman ...
-
bioRxiv - Neuroscience 2024Quote: ... and samples were centrifuged at 24,000 rpm at 4°C for 1h in a SW41Ti Swinging-Bucket Rotor (Beckman Coulter). After discarding the supernatant ...
-
bioRxiv - Molecular Biology 2024Quote: ... and EVs were pelleted by ultracentrifugation for 60 minutes at 100,000 x g at 4 ° C in an SW40.Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation at 4℃ at 184,000 x (g) in a 70Ti rotor for 50 minutes (Beckman Coulter). After affinity chromatography with StrepTactin SuperFlow resin (IBA) ...
-
bioRxiv - Biochemistry 2024Quote: ... A crude ribosome pellet was obtained by centrifugation for 2h at 200,000 × g at 4 °C (70Ti rotor, Beckman Coulter) and solubilized in HMA6/30 for 16h at 4°C ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... EVs were purified from concentrated HES by ultracentrifugation at 100,000 x g for 90 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... and pelleted each time by ultracentrifugation at 100,000 x g for 70 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation for 35 minutes at 4℃ at 70,000 x (g) in a 45Ti rotor (Beckman Coulter). Constructs containing N-terminal TOG domains (TOG1 ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... containing cell nucleus and other heavy organelles was discarded and supernatant was centrifuged for 30 min at 48,000 × g at 4 °C (Beckman Avanti J-251 Ultra-centrifuge; Beckman Coulter). The supernatant was discarded ...
-
bioRxiv - Microbiology 2024Quote: ... Ribosomes were isolated by sucrose cushion ultracentrifuged at 100,000 rpm (543,000 × g) for 1 h at 4°C with a TLA110 rotor and an Optima MAX-TL ultracentrifuge (Beckman Coulter). Subsequently ...
-
bioRxiv - Immunology 2024Quote: ... and centrifuged at 100,000 x g at 4°C for 90 min using the Optima™ XPN-80 Ultracentrifuge from Beckman Coulter ...
-
bioRxiv - Biophysics 2024Quote: ... the sample was separated by sucrose gradient ultracentrifugation with the gradients of 10 to 30 % sucrose and 0 to 0.2 % glutaraldehyde at 97,311 g at 4°C for 18hrs using an Optima™ XL-100K ultracentrifuge (Beckman Coulter). The fractions containing the complex were pooled and the sucrose was removed by using Amicon Ultra Centrifugal Filter ...
-
bioRxiv - Cancer Biology 2024Quote: ... Samples were subjected to ultracentrifugation of 260,000 x g for 16 hours at 4°C using the Optima XPN-80 and SW40Ti rotor (Beckman Coulter). Twelve 1-mL fractions were collected from the top and subjected to immunoblotting.
-
bioRxiv - Biophysics 2024Quote: ... the clarified lysate underwent a further centrifugation step at 205,000xg for 1 hour at 4 °C (60Ti rotor, Beckman Coulter). The membrane pellet was then resuspended in the resuspension buffer ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified at 150,000 rcf for 30 min at 4°C using a Type 45 Ti rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified at 503,000 rcf for 45 min at 4°C using a Type 70 Ti rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Cell Biology 2022Quote: ... The product from PCR-2 was purified using 1x volume of AMPure XP beads (Beckman Coulter) and eluted in 15 μL of IDTE buffer (IDT DNA) ...
-
bioRxiv - Bioengineering 2021Quote: ... The supernatant was then ultracentrifuged for 2 hours using Optima™ L-80XP Ultracentrifuge (Beckman Coulter) at 100,000 x g at 4°C ...
-
bioRxiv - Molecular Biology 2020Quote: ... The solution was centrifuged at 36,000 rpm for 2 h in a SW41Ti rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Genetics 2021Quote: ... We purified the final libraries with 2 rounds of 0.8X volume of SPRISelect (Beckman Coulter, B23318).
-
bioRxiv - Immunology 2020Quote: ... were incubated with 1-2 million 1D8 cells following standard FACS protocol and analyzed by Beckman.
-
bioRxiv - Microbiology 2021Quote: ... and centrifuged for 2 h at 64,000 g in A27-8×50 mL rotors (Beckman Coulter) to sediment virus particles ...
-
bioRxiv - Cell Biology 2022Quote: ... Equal volume (2 ml i.e 1600 µg) of cell extracts were loaded in ultracentrifuge tubes (Beckman). Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman) ...
-
bioRxiv - Bioengineering 2023Quote: ... in 2%BSA and 2mM EDTA and sorted using FACS sorter (Beckman Coulter, MoFlo Astrios Zellsortierer). For gating ...
-
bioRxiv - Microbiology 2023Quote: ... resuspended in 2% BSB-PFA and analysed by Flow Cytometry on BD Celesta instrument (Beckman Coulter) using FlowJoTM software ...
-
bioRxiv - Immunology 2023Quote: Cells were washed with 2% FACs and data was acquired using CytoFLEX S (Beckman Coulter, USA) and analyzed via FlowJo v10 software (Oregon ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 35,000 rpm for 2 hrs 40 min using a SW41Ti rotor (Beckman). Gradients were fractionated using a Brandel (UV ...
-
bioRxiv - Microbiology 2023Quote: ... Three 1:2 serial dilutions were done suing a Biomek i7 liquid handler (Beckman Coulter, USA), in order to obtain the four working concentrations ...
-
bioRxiv - Genetics 2024Quote: ... The filtered medium was centrifuged at 19400 rpm and 17 °C for 2 h (Beckman Coulter). The pellet was suspended in 250 µL HBSS (Thermo Fisher Scientific ...
-
bioRxiv - Developmental Biology 2024Quote: ... EVs were pelleted by ultracentrifugation at 55,000 × rpm for 2 hours using the TLA120.4 rotor (Beckman). The EV pellet was resuspended in 1XPBS and frozen at −80 °C until further analysis.
-
bioRxiv - Cancer Biology 2024Quote: ... then trypsinized and resuspended in PBS with 2% FBS for quantification using a flow cytometer (Beckman). JC-1 monomers and aggregates were detected at PE and FITC channels ...
-
bioRxiv - Biophysics 2022Quote: ... The fractions containing monomeric peptide were pooled and centrifuged at 386000 g for 3 h in an Optima TLX ultracentrifuge equipped with a TLA 120.1 rotor (Beckman Coulter, Atlanta, GA, USA). Orthophosphoric acid or sodium phosphate were added to a final concentration of 20 mM to adjust the pH to 2.8 or 7.4 ...
-
bioRxiv - Biochemistry 2021Quote: The absorbance spectra of recombinant DosS and DosT (3 µM) were determined at room temperature using quartz cuvettes with rubber stoppers in a DU800 spectrophotometer (Beckman Coulter, Fullerton, CA). The reduction of recombinant DosS was achieved via addition of sodium dithionite (DTH ...
-
bioRxiv - Bioengineering 2023Quote: ... the supernatant was then taken and loaded into a 10% to 45% sucrose gradient solution and centrifuged at 360000 rpm for 3 h (Beckman Optima XE-100). 18 fractions from each sample were collected using a piston gradient fractionator (Biocomp ...
-
bioRxiv - Microbiology 2022Quote: ... induced by doxycycline (DOX) at 3 μg/ml and sorted for high GFP-expressing cells by MoFLO Astrios EQs (Beckman Coulter Life Sciences) using 488 nm lasers ...
-
bioRxiv - Microbiology 2024Quote: ... aliquots of the cultures were fixed in 70% ethanol to analyze cell mass using the Multisizer 3 Coulter counter (Beckman Coulter, Brea, CA). The remaining cultures were further incubated for 4 h with 0.3 mg/mL rifampicin and 0.01 mg/mL cephalexin to allow run-out replication of chromosomal DNA ...
-
bioRxiv - Plant Biology 2021Quote: ... the samples were centrifuged at 35 000 RPM for 18 hours at 4°C in a 70Ti rotor and L8-M ultracentrifuge (Beckman Coulter). The ribosome pellets were then gently washed with RNase-free water and resuspended in 300 μl of resuspension buffer (100 mM Tris·HCl (pH 8.0) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The gradient was ultracentrifuged at 55,000 rpm for 55 min at 4 °C with max acceleration and slow deceleration using an Optima LE-80K Ultracentrifuge and SW55Ti rotor (Beckman Coulter). The sucrose gradient was fractionated according to the number of associated ribosomes as determined by the profile of the absorbance at 254 nm using a Density Gradient Fractionation System (Brandel ...
-
bioRxiv - Neuroscience 2021Quote: ... This was incubated for 1 hour at room temperature while rotating before centrifugation at 100,000 x g for 90 minutes at 4°C using the Optima™ MAX-XP Ultracentrifuge (Beckman Coulter). The supernatant was then collected (sarkosyl-soluble fraction) ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genomics 2020Quote: ... Lentiviral supernatant was collected at 48 and 72hrs post-transfection and subsequently concentrated by ultracentrifugation (24,000 rpm, 4°C, 2hrs) (Beckman Coulter SW32).
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Plant Biology 2020Quote: ... The loaded density gradients were centrifuged at 33,000 g for 14.5 h at 4°C using a six-position SW41 Ti rotor (Beckman Coulter, Kerfeld, Germany). The positions of ribosome complexes varied slightly with each centrifugation run that comprised a set of six samples ...
-
bioRxiv - Bioengineering 2020Quote: ... Ultracentrifugation was performed at 100,000 x g at 4 C for 45 min in an Optima MAX-XP ultracentrifuge (Beckman Coulter, Inc.). Supernatant was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... in BC300N buffer and centrifuged for 4hr at 55,000rpm at 4°C in a TLS-55 rotor (with Beckman 356860 adaptors). 40µl fractions were collected by pipetting from the top ...
-
bioRxiv - Biophysics 2021Quote: Purified 3C DNA from each sample was sonicated to 200-400 bp with a Soniprep 150 probe sonicator at 4°C and purified with a standard Ampure XP Bead protocol (Beckman Coulter) using a 1/1.5 DNA to bead ratio ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was then collected and subjected to ultracentrifugation at 100,000 x g for 70 min at 4°C using an Optima XPN-80 ultracentrifuge with SW 32 Ti swinging rotor (Beckman Coulter). Pellets were washed in PBS 1X and EVs were subjected to an additional centrifugation at 100,000 x g for 30 min at 4°C using an Optima MAX ultracentrifuge ...
-
bioRxiv - Neuroscience 2020Quote: ... centrifuged at 100,000 g for 70 min at 4°C using an Optima XPN-80 ultracentrifuge with SW 32 Ti swinging rotor (Beckman Coulter) and then processed for further analyses.