Labshake search
Citations for Beckman :
1051 - 1100 of 1540 citations for 5 Pyrimidinecarbonitrile 4 6 diamino 2 methoxy 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... were incubated with 1-2 million 1D8 cells following standard FACS protocol and analyzed by Beckman.
-
bioRxiv - Microbiology 2021Quote: ... and centrifuged for 2 h at 64,000 g in A27-8×50 mL rotors (Beckman Coulter) to sediment virus particles ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 35,000 rpm for 2 hrs 40 min using a SW41Ti rotor (Beckman). Gradients were fractionated using a Brandel (UV ...
-
bioRxiv - Microbiology 2023Quote: ... Three 1:2 serial dilutions were done suing a Biomek i7 liquid handler (Beckman Coulter, USA), in order to obtain the four working concentrations ...
-
bioRxiv - Cell Biology 2022Quote: ... Equal volume (2 ml i.e 1600 µg) of cell extracts were loaded in ultracentrifuge tubes (Beckman). Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman) ...
-
bioRxiv - Bioengineering 2023Quote: ... in 2%BSA and 2mM EDTA and sorted using FACS sorter (Beckman Coulter, MoFlo Astrios Zellsortierer). For gating ...
-
bioRxiv - Microbiology 2023Quote: ... resuspended in 2% BSB-PFA and analysed by Flow Cytometry on BD Celesta instrument (Beckman Coulter) using FlowJoTM software ...
-
bioRxiv - Immunology 2023Quote: Cells were washed with 2% FACs and data was acquired using CytoFLEX S (Beckman Coulter, USA) and analyzed via FlowJo v10 software (Oregon ...
-
bioRxiv - Plant Biology 2021Quote: ... the samples were centrifuged at 35 000 RPM for 18 hours at 4°C in a 70Ti rotor and L8-M ultracentrifuge (Beckman Coulter). The ribosome pellets were then gently washed with RNase-free water and resuspended in 300 μl of resuspension buffer (100 mM Tris·HCl (pH 8.0) ...
-
bioRxiv - Cell Biology 2019Quote: ... by ultracentrifugation at 150,000 × g for 12 h at 4°C using an Optima L-100XP centrifuge equipped with a SW55Ti rotor (Beckman Coulter). Eleven fractions were collected from the top of the sucrose gradient.
-
bioRxiv - Molecular Biology 2021Quote: ... The gradient was ultracentrifuged at 55,000 rpm for 55 min at 4 °C with max acceleration and slow deceleration using an Optima LE-80K Ultracentrifuge and SW55Ti rotor (Beckman Coulter). The sucrose gradient was fractionated according to the number of associated ribosomes as determined by the profile of the absorbance at 254 nm using a Density Gradient Fractionation System (Brandel ...
-
bioRxiv - Neuroscience 2021Quote: ... This was incubated for 1 hour at room temperature while rotating before centrifugation at 100,000 x g for 90 minutes at 4°C using the Optima™ MAX-XP Ultracentrifuge (Beckman Coulter). The supernatant was then collected (sarkosyl-soluble fraction) ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genomics 2020Quote: ... Lentiviral supernatant was collected at 48 and 72hrs post-transfection and subsequently concentrated by ultracentrifugation (24,000 rpm, 4°C, 2hrs) (Beckman Coulter SW32).
-
bioRxiv - Biophysics 2019Quote: AUC-SV analyses were performed in XL-A analytical ultracentrifuge equipped with a 4-hole An-60 Ti rotor and 12-mm double-sector charcoal-filled epon centerpieces (Beckman Coulter). Sedimentation velocity measurements using absorbance optics of reference buffer and samples in 20 mM Tris-HCl (pH 8.0) ...
-
bioRxiv - Cell Biology 2019Quote: Viability of unlabeled and ferumoxytol-labeled murine MSCs (n=4) and human MSCs (n=3) was assessed by Trypan blue dye exclusion using ViCell (Beckman Coulter).
-
bioRxiv - Molecular Biology 2019Quote: ... The cleared supernatant was layered over 15-40% sucrose gradients in disassociation buffer and spun 28000 rpm for 16 hours at 4°C in a SW-32 rotor (Beckman-Coulter). Gradients were fractionated with an ISCO fractionation system and 30S + 50S peaks were combined ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Plant Biology 2020Quote: ... The loaded density gradients were centrifuged at 33,000 g for 14.5 h at 4°C using a six-position SW41 Ti rotor (Beckman Coulter, Kerfeld, Germany). The positions of ribosome complexes varied slightly with each centrifugation run that comprised a set of six samples ...
-
bioRxiv - Bioengineering 2020Quote: ... Ultracentrifugation was performed at 100,000 x g at 4 C for 45 min in an Optima MAX-XP ultracentrifuge (Beckman Coulter, Inc.). Supernatant was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... in BC300N buffer and centrifuged for 4hr at 55,000rpm at 4°C in a TLS-55 rotor (with Beckman 356860 adaptors). 40µl fractions were collected by pipetting from the top ...
-
bioRxiv - Biophysics 2021Quote: Purified 3C DNA from each sample was sonicated to 200-400 bp with a Soniprep 150 probe sonicator at 4°C and purified with a standard Ampure XP Bead protocol (Beckman Coulter) using a 1/1.5 DNA to bead ratio ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was then collected and subjected to ultracentrifugation at 100,000 x g for 70 min at 4°C using an Optima XPN-80 ultracentrifuge with SW 32 Ti swinging rotor (Beckman Coulter). Pellets were washed in PBS 1X and EVs were subjected to an additional centrifugation at 100,000 x g for 30 min at 4°C using an Optima MAX ultracentrifuge ...
-
bioRxiv - Neuroscience 2020Quote: ... centrifuged at 100,000 g for 70 min at 4°C using an Optima XPN-80 ultracentrifuge with SW 32 Ti swinging rotor (Beckman Coulter) and then processed for further analyses.
-
bioRxiv - Plant Biology 2021Quote: ... Syringes were placed inside 50-mL tubes and centrifuged for 20 min at 700g with slow acceleration (4°C, JA-14 rotor, Avanti J-20 XP Centrifuge; Beckman Coulter). The apoplastic wash fluid was then filtered through a 0.22 μm membrane and centrifuged at 10,000g for 30 minutes to remove any remaining large particles ...
-
bioRxiv - Microbiology 2021Quote: ... cells were fixed with 4% Paraformaldehyde for 30 minutes at room temperature and analyzed for GFP fluorescence on a Gallios flow cytometer (Beckman-Coulter). For SARS-CoV-2 experiments ...
-
bioRxiv - Molecular Biology 2021Quote: ... and spung for 20hrs at 151,000 x g (rav) at 4°C in a swinging bucket rotor (Beckman SW-41 Ti). 12 1ml fractions were taken off the gradient and incubated for 10min at RT with 100μl 0.15% deoxycholine ...
-
bioRxiv - Microbiology 2021Quote: ... and cytoplasmic membranes were precipitated by ultracentrifugation for 45 min at 55,000 rpm and 4°C (Beckman Coulter rotor TLA 55). Membrane fractions resuspended in resuspension buffer (750 mM aminocaproic acid ...
-
bioRxiv - Biophysics 2021Quote: ... The crude lysate was sonicated on ice and clarified by centrifugation for 30 min at 4°C and 35,000 rpm in a Beckman L90K Optima and 50.2 Ti rotor (Beckman, Brea, CA, USA). The clarified lysate was applied to a HisTrapHP column (Cytiva ...
-
bioRxiv - Cancer Biology 2022Quote: ... vehicle control or compounds from the small molecule library (Supplementary Table 4) were added using an Echo liquid handler (Labcyte/Beckman Coulter). Cells were then incubated in an IncuCyte Zoom (Sartorius ...
-
bioRxiv - Microbiology 2022Quote: ... Most of the supernatant was discarded leaving 12x∼200 µL of concentrated fibers that were pooled and layered on top of ultracentrifuge tubes of 4 mL (polypropylene centrifuge tubes, Beckman Coulter) containing a discontinuous sucrose gradient (40% ...
-
bioRxiv - Biophysics 2022Quote: ... and the supernatant was subjected to ultracentrifugation to separate the membrane fraction (100,000g, 1 hour, 4°C using an Optima XE-90, Beckman Coulter centrifuge). Membranes were resuspended in lysis buffer supplemented with cOmplete EDTA-free protease inhibitors (Roche) ...
-
bioRxiv - Microbiology 2022Quote: ... through a syringe needle (0.4-by 20 mm needles) and the cell wall was collected by ultracentrifugation at 90,000 × g for 45 min at 4°C (Beckman Coulter, Inc.). To the pellet ...
-
bioRxiv - Bioengineering 2022Quote: ... The final supernatant was collected and EVs were pelleted at 100,000 g at 4°C for four hours in an Optima ultracentrifuge using the Beckman Ti45 rotor (Beckman Coulter, USA). The EVs pellet was washed with PBS and resuspended in 0.22 μm filtered PBS ...
-
bioRxiv - Cell Biology 2022Quote: ... A new supernatant was collected in a prechilled 1.5 ml ultracentrifuge tube and centrifuged at 100000 g for 1 h at 4°C in a TLA-55 rotor (Beckman Coulter). The resulting pellet was resuspended in the same isotonic buffer containing antiproteases and was frozen at -80°C together with the 100000 g supernatant ...
-
bioRxiv - Microbiology 2021Quote: ... Cell supernatants containing the pseudotype viral particles were centrifuged at 109,000 g or 35 min at 4 °C using a TLA100.3 rotor with an Optima TLX ultracentrifuge (Beckman Coulter, CA, USA), and the pellet was then lysed for western blotting analysis.
-
bioRxiv - Molecular Biology 2020Quote: ... The filtered supernatant was then centrifuged in JA20 tubes at 6000 rpm overnight (O/N) at 4°C (Avanti J-25, Beckman Coulter). The following day the viral pellet was resuspended in 5 ml PBS and centrifuged at 20,000 rpm for 90 mins at 4°C (Optima XL-100K ...
-
bioRxiv - Molecular Biology 2020Quote: ... The gradients were centrifuged at 40000 rpm for 2h at 4°C in a SW 60 Ti swinging-bucket rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 100,000 g at 4°C for 60 min in a swinging rotor (SW40Ti) (Beckman Coulter OptimaTM L–100K). Following centrifugation ...
-
Single cell analysis of the cellular heterogeneity and interactions in the injured mouse spinal cordbioRxiv - Neuroscience 2020Quote: ... were added to each sample well and cells were kept at 4°C until analysis on a Cytoflex Flow Cytometer (Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... were pelleted in Beckman Coulter polypropylene open top tubes (110,000 x g for 70 min at 4°C, in Beckman rotor SW28). After washing ...
-
bioRxiv - Immunology 2021Quote: ... 4 ng of RNA were retrotranscribed and cDNA was amplified using 13 cycles and purified with AMPure XP beads (Beckman Coulter). Concentration was determined using Qubit 3.0 (Life Technologies ...
-
bioRxiv - Microbiology 2022Quote: ... and the viral particles were concentrated by ultracentrifugation for 1h at 30,000 rpm at 4°C in an SW40 rotor (Beckman, Fullerton, CA). Viral pellets were resuspended in TNC buffer (10 mM Tris-HCl [pH 7.5] ...
-
bioRxiv - Neuroscience 2022Quote: ... dispersed and collected in a single tube and further centrifuged for 4 hours at 21000 rpm in a 20% sucrose gradient (SW55 Beckman rotor). The resulting pellet was suspended in 100 μl PBS and the virus was aliquoted (5-10 μl ...
-
bioRxiv - Cancer Biology 2022Quote: ... Crude vesicle pellets were resuspended in 1 ml of exosome-depleted 1X PBS and re-pelleted by centrifugation at 100,000 g for 70 minutes at 4°C (Beckman 45 Ti). Pellets at the bottom of the centrifugation tubes were resuspended in approximately 50ul of 1X PBS ...
-
bioRxiv - Systems Biology 2020Quote: ... The resultant supernatant was collected and underwent ultracentrifugation at 100,000xg for 40 minutes at 4°C (rotor MLA-55) in 10.4 ml 16×76 mm polycarbonate capped centrifuge tubes (Beckman Coulter 355603), the pellet was washed once in PBS−/− and centrifuged again at 100,000xg for 40 minutes at 4°C ...
-
bioRxiv - Molecular Biology 2019Quote: ... EDS was obtained after 18 h ultracentrifugation at 100,000 g and 4 °C (SW55 Ti rotor, Beckman Coulter, Fullerton, California, USA), followed by 0.22 µm filtration ...
-
bioRxiv - Molecular Biology 2019Quote: ... followed by 3 h ultracentrifugation at 100,000 g and 4 °C using SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Resulting pellets were resuspended in 100 µl PBS and stored at −80 °C until further use ...