Labshake search
Citations for Beckman :
1001 - 1050 of 1703 citations for 2H Pyrazolo 4 3 c pyridine 3 chloro 4 5 6 7 tetrahydro since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2021Quote: ... Ten milliliters of allantoic or amniotic fluid was centrifuged at maximum speed (16,000 × g) for 30 min at 4 °C using a floor ultra centrifuge (Beckman Optima L-60 Ultracentrifuge). After removal of the supernatant ...
-
bioRxiv - Microbiology 2023Quote: ... cells were pelleted by centrifugation at 6,000 ×g at 4 °C for 15 min with ALLEGRA X-30R (Beckman Coulter, Brea, CA, USA). The supernatant was centrifuged at 15,000 ×g at 4 °C for 15 min with Sorvall LYNX4000 (Thermo Scientific ...
-
bioRxiv - Bioengineering 2023Quote: ... The diluted sample was then centrifuged using a Beckman ultracentrifuge (Optima L90K) with two cycles of 1h10 at 110,000 x g at 4°C (rotor type 70Ti, Beckman Floor Ultracentrifuge Optima L90K). Between them ...
-
bioRxiv - Cell Biology 2024Quote: ... and centrifuged at 16,500 × g (14,500 rpm) at 4°C for 20 min using a Type Ti 45 fixed-angle rotor (Beckman Coulter, k-factor 1.275) to isolate large EVs ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... the cell lysate was layered on top of a discontinuous OptiPrep® gradient (50 %, 35 %, 30 %, 20 %, and 15 %) and centrifuged at 135,000 g for 1 h at 4°C (Beckman L8-80M Ultracentrifuge, USA). The melanin pellet was recovered ...
-
bioRxiv - Biophysics 2023Quote: ... Virions were banded by density gradient centrifugation at 152,000 x g for 16 h at 4°C in a SW41 rotor (Beckman Coulter SRL, Milan, Italy). The gradient was then fractionated ...
-
bioRxiv - Biochemistry 2023Quote: ... Expression was continued for 7h and the cells harvested by centrifugation at ∼6250g for 15 min at 4°C (Beckman Coulter centrifuge, JLA8.1000).
-
bioRxiv - Biochemistry 2023Quote: ... expression from the viral backbone and cells harvested between 72h-84h after cell proliferation arrest by centrifugation at 1200g for 15min at 4°C (Beckman Coulter centrifuge, JLA8.1000). Further ...
-
bioRxiv - Biochemistry 2023Quote: ... Expression was continued for 16h and the cells harvested by centrifugation at ∼6250g for 15 min at 4°C (Beckman Coulter centrifuge, JLA8.1000). The RING Zn-finger domains from both RING1B and PCGF4 subunits were cloned into a modified polycistronic expression vector (pET29a ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Cancer Biology 2022Quote: ... the sample was centrifuged at 268,000 ×g at 4°C for 38 min with an MLA-50 rotor (Beckman Coulter, Brea, CA, USA). The top layer and subsequent 10 fractions (fractions 1–10 ...
-
bioRxiv - Plant Biology 2023Quote: ... The disrupted cells were subjected to ultracentrifugation at 4°C and 235000 g for 1h (Beckman Optima™ L-80 XP, rotor Ti45). The resulting supernatant was loaded onto an Äkta purifier system (GE HealthCare ...
-
bioRxiv - Cancer Biology 2023Quote: ... the supernatant was ultracentrifuged at 100,000 × g at 4°C for 90 min using Beckman Coulter Optima™ XE-90 Ultracentrifuge (Beckman Colter, Brea, CA) equipped with Type 45 Ti rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the resulting G-actin mix was ultracentrifuged at 90K rpm for 30 minutes at 4°C in an ultracentrifuge (Beckman, Optima TL 100) to remove actin oligomers and/or aggregates.
-
bioRxiv - Microbiology 2024Quote: ... The solution was then given a final concentration of 25 mM MgCl2 and ultracentrifuged at 200,000 x g for two hours (4°C) (Beckman Coulter Type 45 Ti). The pellet was then resuspended in 100 μl of distilled water.
-
bioRxiv - Microbiology 2024Quote: ... The 1 ml fraction containing the phage was then placed on a 40% (w/v) - 60% (w/v) sucrose gradient for 1 hour at 63,400 x g at 4°C (Beckman Coulter SW 40 Ti). The 1 ml fraction was then placed in a 50 kDa dialysis membrane (Spectrum Labs ...
-
bioRxiv - Microbiology 2024Quote: ... was added to the supernatant on ice with constant stirring until protein precipitate was observed followed by centrifugation at 10,000 rpm at 4°C for 10 minutes (Beckman coulter, JA-25.50 rotor). The pellet was resuspended in 4 ml of binding buffer (20 mM Tris-HCl ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was fractionated at 200 k x g for 20 minutes at 4°C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) into a cytosolic (s200 ...
-
bioRxiv - Neuroscience 2024Quote: ... cells were harvested and lysed in the lysis buffer described above and ultracentrifuged at 100,000 x g for 30 min at 4 °C using the TLA-110 rotor and the Optima™ MAX-XP tabletop ultracentrifuge (Beckman, Brea, CA). The supernatants were collected as “triton-soluble fraction” and the pellets were washed with the lysis buffer ...
-
bioRxiv - Biochemistry 2024Quote: ... Nucleosome sucrose gradients were then centrifuged at 41,000 rpm and 4°C for 22 h in a SW41 Ti rotor in an Optima L-100 XP ultracentrifuge (Beckman Coulter, Brea, CA). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... The A2aR-expressing membrane fraction was obtained by ultra- centrifugation at 100,000 g for 1 hour at 4°C in a Type 70 Ti Fixed-angle rotor (Optima XPN ultracentrifuge, Beckman Coulter Life Sciences). The pellet (membrane fraction ...
-
Scalable Fabrication of a Tough and Recyclable Spore-Bearing Biocomposite Thermoplastic PolyurethanebioRxiv - Bioengineering 2024Quote: ... Spore suspension was centrifuged at 12,000 g at 4 °C for 20 min (Avanti J-E, Beckman Coulter Life Science, Brea, CA, USA). After removing supernatant ...
-
bioRxiv - Cell Biology 2024Quote: ... The supernatant was subsequently ultracentrifuged at 30,000 × g for 60 min at 4°C in an SW32Ti rotor (Beckman Coulter, Brea, CA, USA) to obtain L-EVs ...
-
bioRxiv - Biochemistry 2024Quote: ... samples from different temperatures for each drug treatment were pooled and subjected to ultracentrifugation at 100,000g for 20 minutes at 4°C (Beckman Coulter Optima Max-XP). The soluble proteins from the supernatant were collected for further analysis.
-
bioRxiv - Cell Biology 2024Quote: ... Microsomes were enriched at 200 k x g for 20 minutes at 4°C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) and washed twice with MIB ...
-
bioRxiv - Biochemistry 2023Quote: ... counted using a coulter counter (Beckman Coulter, Multisizer 4) and seeded onto 24-well dishes (Nunc ...
-
bioRxiv - Cancer Biology 2021Quote: ... 100,000xg for 3 h in an Optima XPN-80 (Beckman Coulter) ultracentrifuge using UltraClear Thinwall tubes ...
-
bioRxiv - Immunology 2023Quote: ... Lymphocytes were enumerated with a cell counter (Beckman Coulter Multisizer 3) set to detect nuclei between 3.5 and 10 μm ...
-
bioRxiv - Immunology 2023Quote: ... Lymphocytes were enumerated with a cell counter (Beckman Coulter Multisizer 3) set to detect nuclei between 3.5 and 10 μm.
-
bioRxiv - Immunology 2023Quote: ... Measurements were performed in a Gallios 10/3 cytometer (Beckman Coulter), using the Kaluza for Gallios Acquisition software (Version 1.0 ...
-
bioRxiv - Cancer Biology 2023Quote: ... After 5-7 days cells were counted using a Z1 Coulter Particle Counter (Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... Bacteria were harvested by centrifugation at 4000 rpm for 25 min at 4°C in a Beckman J6M clinical centrifuge (Beckman Coulter Diagnostics; Brea, California), and re-suspended on ice in lysis buffer (50 mM Tris pH 7.5 ...
-
bioRxiv - Microbiology 2020Quote: ... and layered on top of a two-step sucrose gradient (20%/50% w/v in HNE) and centrifuged for 2 h at 154 000 x g at 4 °C in a SW41 rotor (Beckman Coulter, Woerden, the Netherlands) to clear from cell debris ...
-
bioRxiv - Systems Biology 2020Quote: ... and the resultant supernatant was ultracentrifuged at 100,000xg for 40 minutes at 4°C (rotor TLA 120.2; Beckman Coulter 343778 1 ml uncapped tubes).
-
bioRxiv - Physiology 2021Quote: ... sEV were further isolated from lEV-depleted supernatants following a 100,000 xg ultracentrifugation step for 1 hour at 4°C (rotor MLA-50, Beckman Coulter Optima MAX-XP Ultracentrifuge) and two washes in NaCl before resuspension in NaCl.
-
bioRxiv - Biophysics 2023Quote: ... Cell debris was removed by centrifugation at 20,000 rpm at 4°C for 1 h (Avanti® J-E centrifuge from Beckman Coulter, rotor: JLA 25.50). The supernatant was collected and loaded onto a pre-equilibrated 5 ml His-Trap FF crude column ...
-
bioRxiv - Molecular Biology 2023Quote: ... and were centrifuged at 120,000 g for 120 minutes at 4°C with a MLA55 fixed-angle rotor using an Optima MAX-XP ultracentrifuge (Beckman Coulter, California, United States). The pelleted hVSMCs EVs were resuspended in 100 μL PBS and washed in 13.2 mL PBS by ultracentrifugation at 120,000 g for 60 minutes at 4°C ...
-
bioRxiv - Plant Biology 2024Quote: ... placed inside 250 mL centrifuge bottles and centrifuged for 10 min at 100 g at 4 °C (JA-14 rotor, Avanti J-20 XP Centrifuge; Beckman Coulter, Indianapolis, IN, USA). LSW was then filtered through a 0.2 µm syringe filter (Acrodisc syringe filter ...
-
bioRxiv - Microbiology 2024Quote: ... EMVs were obtained by ultracentrifugation from 3 mL of filtrate at 100,000 × g (average centrifugal force) and 4 °C for 2 h with 50Ti rotor and Optimax centrifuge (Beckman Coulter, Brea, CA, United States). The supernatant after removing EMVs was collected as PVF ...
-
bioRxiv - Molecular Biology 2024Quote: ... followed by ultracentrifugation for 15 h at 79 000 x g at 4°C in an Optima L-80 XP Ultracentrifuge (Beckman Coulter SW41-Ti rotor). Starting from the top of the gradient ...
-
bioRxiv - Cell Biology 2020Quote: ... Gradients were then centrifuged for 2h 45 min on 35.000 rpm (Beckman Coulter ...
-
bioRxiv - Biophysics 2024Quote: ... and then centrifuged at 250,000 g for 7 min at 37 °C in a TLA100 rotor (Beckman). The pellet was then resuspended in a bright tubulin mix containing 7.5 mM unlabeled tubulin ...
-
bioRxiv - Biochemistry 2022Quote: ... Around 100 µL of sample at 15 µM was applied to each gradient and centrifuged by ultracentrifugation at 45 000 rpm at 4°C in SW 60 Ti Swinging-bucket rotor (Beckman Coulter, Palo Alto, US-CA) for 16 hours ...
-
bioRxiv - Microbiology 2020Quote: ... Prepared phage suspension was transferred to U-formed centrifuge tubes suitable for ultra-centrifugation (25 000 × g, 120 min, 4 °C) (Beckman Coulter, Optima™ MAX-XP). Pellets were resuspended in 200 µL of SM buffer and phage stock suspensions were stored at 4°C and −80°C.
-
bioRxiv - Cell Biology 2021Quote: ... This lysate was sonicated for 2 min (15 s on and 20 s off for 2 min at 20% amplitude) and centrifuged at 100,000 x g for 40 min at 4°C (Avanti J-301 Beckman Coulter centrifuge with rotor JA-30.50). The supernatant was filtered and passed through preequilibrated 5 ml HisTrap FF columns (GE Healthcare) ...
-
bioRxiv - Biophysics 2023Quote: ... Cells were harvested by centrifugation at 8000 g at 4°C for 20 min (Avanti® J-E centrifuge from Beckman Coulter, rotor: JLA 16.250).
-
bioRxiv - Biochemistry 2024Quote: ... Pellets were washed and gently resuspended in 1 mL of PBS and centrifuged at 50,000 x g for 1 h at 4°C (Beckman Optima MAX-E, TLA-55 rotor). Pellets were resuspended in 500 μl of PBS to obtain concentrated lentiviral stocks that were stored at −80°C in aliquots ...
-
bioRxiv - Bioengineering 2023Quote: ... subtilis spores were collected from the culture by the centrifugation at 8000 rpm at 4 °C for 20 min (Avanti J-E, Beckman Coulter Life Science, IN, USA). Supernatant was removed and the spore pellets were resuspended in fresh 100 mM PBS pH 7.4 ...
-
bioRxiv - Biophysics 2022Quote: ... Labeled G-actin was clarified to remove any remaining F-actin or precipitated FMAL by centrifugation (10 min, 90,000 rpm in a Beckman TLA-120.2 rotor at 4°C). The extent of labeling (typically around 70% ...