Labshake search
Citations for Beckman :
851 - 900 of 1703 citations for 2H Pyrazolo 4 3 c pyridine 3 chloro 4 5 6 7 tetrahydro since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Physiology 2022Quote: ... 40 ml of filtrates were ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 x g for 70 min at 4°C using an Optima L-100 XP Ultracentrifuge equipped with 90 Ti Fixed-Angle Titanium Rotor (Beckman Coulter). The final EVs pellets were suspended in 200 µl of PBS (Lonza) ...
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Neuroscience 2022Quote: ... The discontinuous sucrose gradient was centrifuged at 242K g for 47 min at 4 °C in a vertical rotor (VTi50 rotor, Beckman Coulter). The bulk GC fraction (GCF ...
-
bioRxiv - Microbiology 2022Quote: ... Lysates were then submitted to centrifugation at 100,000 g for 45 min at 4°C in an Ultracentrifuge Beckman XL-90 (Beckman France, Villepinte) equipped with a 70.1T1 rotor ...
-
bioRxiv - Biophysics 2024Quote: ... The virions were harvested from the supernatant by centrifugation through 1.5ml of 30% sucrose at 10,000 RPM at 4°C for 2hrs (Beckman L8-70M Ultracentrifuge). The resulting pellet of virions was resuspended in 20ul of RIPA lysis buffer containing protease inhibitors.
-
bioRxiv - Neuroscience 2024Quote: ... The same mass of total extracts was taken for a high spin at 154,000 g for 20 minutes in 4 °C using an ultracentrifuge (Beckman, TLX-120K) to obtain the supernatant soluble fraction (S1 ...
-
bioRxiv - Microbiology 2024Quote: ... The final Hcp1-VLPs particles were pelletized by ultracentrifugation at 274,000 ×g at 4°C for 1 h in a SW41 Ti rotor (Beckman Coulter, Inc). The final pellet was resuspended in PBS pH 7.4.
-
bioRxiv - Neuroscience 2024Quote: ... and centrifuged at ∼14.000 x g max (∼10900 x g average) for 22 min at 4 °C (Beckman Coulter, MAX-XP). After centrifugation ...
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 rcf for 70 min at 4 °C using a Optima XE-90 ultracentrifuge with a SW 32 Ti rotor (Beckman Coulter). The EV pellet was resuspended in 0.22 μm-filtered sterile PBS and freshly-used or stored at −80 °C until further use ...
-
bioRxiv - Cell Biology 2024Quote: ... plasma samples were thawed on ice and subjected to ultracentrifugation at 100,000 g for 1 hr or 18 hr at 4 °C (TLA-55 rotor; Optima MAX-MP Tabletop Ultracentrifuge, Beckman Coulter). Pellets were washed once in 1.0 ml PBS ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tube was balanced and subjected to ultracentrifugation at 150,000 × g for 2 h at 4 °C using a swinging-bucket rotor (SW 41 Ti Beckman Coulter, USA).
-
bioRxiv - Bioengineering 2023Quote: ... Samples were ultracentrifuged at 100,000×g for 70 min at 4°C using the Beckman OptimaTM L-80 XP ultracentrifuge (Beckman Coulter, CA). The supernatant was discarded ...
-
bioRxiv - Physiology 2023Quote: ... was ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 × g for 70 min at 4°C (Optima L-100 XP Ultracentrifuge, 90 Ti Fixed-Angle Titanium Rotor; Beckman Coulter). The final EV pellet was suspended in 50 µl of PBS without Ca2+ and Mg2+ (Lonza ...
-
bioRxiv - Neuroscience 2023Quote: ... Supernatant were loaded on top of a discontinuous 0.75/1.0/2.33 M sucrose density gradient and centrifuge at 242,000 x g for 60 min at 4°C (Beckman SWTi41 swing rotor). The growth cone depleted fraction was collected between 0.75 M and 1.0 M sucrose ...
-
bioRxiv - Cell Biology 2023Quote: ... Homogenates were then transferred to a 50 ml tube and centrifuged for 10 mins at 1 000 × g at 4°C (Beckman Coulter). The resulting supernatant was then transferred to microfuge tubes for storage at -80°C as whole liver lysates or to fresh ultracentrifuge tubes for further processing.
-
bioRxiv - Cell Biology 2023Quote: ... The cilia in the upper phase were sedimented by centrifugation (27,000 g, 4°C, 20 min; Beckman Coulter, Avanti JXN-26) and resuspended in Hepes-Magnesium-EGTA-Potassium (HMEK ...
-
bioRxiv - Biochemistry 2023Quote: ... The sample was run on the gradient for 16 hrs at 4 °C using an Optima XE-90 ultracentrifuge (SW40Ti rotor, Beckman-Coulter) at 30,000 rpm ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Genomics 2023Quote: ... cellular/protein debris were then collected by centrifugation at 1,000xg for 15 minutes at 4°C (Beckman Coulter Allegra X-14R), and the supernatant (DNA ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter; Avanti J-20TM centrifuge, Beckman Coulter). vAW was filtered through a single layer of Miracloth and was combined with the cAW ...
-
bioRxiv - Microbiology 2023Quote: ... The normalized cultures were then centrifuged at 5030 x g and 4°C for 20 minutes on an Avanti J-26 XPI (Beckman-Coulter) centrifuge (JS 5.3 rotor) ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tubes were balanced and subjected to centrifugation at 135,000 × g for 2 h at 4 °C using a fixed-angle rotor (TLA-55, Beckman Coulter, USA). After DGUC ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tubes were subjected to centrifugation at 135,000 × g for 2 h at 4 °C using a fixed-angle rotor (TLA-55, Beckman Coulter, USA). After DGUC ...
-
bioRxiv - Biochemistry 2023Quote: ... Mitochondrial crude was pelleted by centrifugation at 9500 ×g (4 °C, 15 min) using the Optima XE-90 Ultracentrifuge with a Ti-45 rotor (Beckman Coulter). The final pellet was resuspended in 2 mL of Resuspension buffer (250 mM sucrose ...
-
bioRxiv - Bioengineering 2023Quote: ... The suspension was then ultracentrifuged (58,000 × g, 1 hr., 4 °C) in an Optima MAX-XP (Beckman Coulter, Indianapolis, IN, USA) to separate residual catalyst ...
-
bioRxiv - Biochemistry 2023Quote: ... then centrifuged at 27,000 gmax for 15 min at 4°C (Optima XPN-100 Ultracentrifuge, Beckman Coulter, with SW60 Ti rotor). Resuspension of the pellet (sub-mitochondrial particles ...
-
bioRxiv - Cancer Biology 2024Quote: ... cells were resuspended in 100µL of PBS and stored at 4°C in the dark until samples were analyzed on a CytoFLEX LX Flow Cytometer (Beckman Coulter). Data was analyzed using FlowJo® software.
-
bioRxiv - Cell Biology 2024Quote: ... to a volume of ∼12 mL with PBS and separated by ultracentrifugation at 160.000 × g for 2 h (4 °C) in a SW Ti41 rotor (Beckman Coulter #331362). Top-layer LDs were collected by aspiration using a pre-wetted 200 µL pipette tip so that maximal LDs were collected in minimal buffer volume ...
-
bioRxiv - Biochemistry 2024Quote: ... Non-solubilized materials were removed by centrifuging the sample at 41,000 r.p.m for 1 h at 4 °C using rotor type 45 Ti in the OptimaTM L-100 XP Ultracentrifuge (BECKMAN COULTER). The resulting supernatant containing the solubilized LysP-GFP was incubated with Ni2+-NTA resin (Qiagen ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were balanced and centrifuged at 42,000 rpm for 35m at 4°C in a SW55Ti rotor and buckets with tube adaptors (Beckman REF: 356860). The supernatant was then concentrated to 80μl by spinning through Amicon 3kDa MWCO concentrator units at 14,000xg for 15-30m at 4°C ...
-
bioRxiv - Microbiology 2024Quote: ... and labeled intracellularly for the structural HIV-1 p24 protein with the anti-p24 clone KC57 antibody (30 min RT followed by 30 min 4°C, Beckman Coulter). HIV-1 RNA probing was performed using the PrimeFlow RNA Assay (ThermoFisher) ...
-
bioRxiv - Plant Biology 2024Quote: ... The tubes were then centrifuged for 20 min at 700 x g with slow acceleration at 4°C using a JA-14 rotor (Avanti J-20 XP centrifuge; Beckman Coulter). The resulting apoplastic wash collected was passed through a 0.22 µm membrane filter to remove bacteria and larger debris ...
-
bioRxiv - Microbiology 2024Quote: ... This sample was then ultracentrifuged at 150,000 g for 2.5 h at 4 °C using a Type 70 Ti or Type 45 Ti rotor in an Optima XE Ultracentrifuge (Beckman Coulter). The translucent VLP pellet formed by this process was resuspended in 200 μl PBS buffer ...
-
bioRxiv - Microbiology 2024Quote: ... Particles from the filtrate were concentrated by ultracentrifugation at 100,000 x g for 2 h at 4°C using an SW32Ti rotor in an Optima LE-80K centrifuge (Beckman Coulter). The pellets from different centrifuge tubes were pooled and resuspended in 1 mL of 1X PBS and pelleted again by ultracentrifugation at 165,700 x g for 2 h at 4°C in a TLA-55 rotor (Beckman Coulter) ...
-
bioRxiv - Immunology 2024Quote: ... Centrifugation was performed (30 min, 800 g, 4 °C) in a swinging bucket on a Beckman Coulter JS-13.1 rotor (Beckman Coulter, USA). Hemocytes concentrated at each density interface were collected separately with a 70 mm long 20Gx2.75” needle mounted on a 1 mL syringe ...
-
Sense codon-misassociated eRF1 elicits widespread ribosome stalling and induction of quality controlbioRxiv - Molecular Biology 2024Quote: ... The mixture was layered over 900 μl of 1 M sucrose cushion 46 and ultracentrifuged at 100,000 rpm ( 543,000 × g) at 4°C for 1 h using a TLA-110 rotor and an Optima MAX-TL Ultracentrifuge (both Beckman Coulter).
-
bioRxiv - Molecular Biology 2024Quote: ... lysed by sonication and ultracentrifuged at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). The clarified lysate was loaded onto pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 26K RPM at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell-free extract so prepared was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was subjected to ultracentrifugation at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell lysate was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The tube was centrifuged at 38,000 x g for 21-24 h at 4°C using the SW40T1 rotor in the Optima L-60+ Ultracentrifuge (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Neuroscience 2024Quote: ... The combined supernatants were centrifuged at 100,000 g for 40 min (4°C) on a TL110 rotor (Beckman Coulter, Paris, France) and the pellet was suspended in the same buffer ...
-
bioRxiv - Microbiology 2024Quote: ... the supernatant was filtered through 0.45-μm syringe filters and ultracentrifuged at 100,000 ×g for 1 h at 4 °C (MLA-50 fixed angle rotor, Beckman Coulter, Germany). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2024Quote: ... After centrifugation at 60,000 x g for 20 min at 4°C in a swing-out rotor (MLS-50, Optima Max-XP, Beckman Coulter), the mitochondrial fraction localized in the interphase between the two sucrose layers was carefully removed with a syringe ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were centrifuged at 4°C for 24 h at 274,400 x g in a SW-40Ti rotor (Beckman Coulter Inc.). To remove KBr ...
-
bioRxiv - Cancer Biology 2024Quote: ... supernatants were ultracentrifuged at 120,000 to 140,000 x g (SW-28 rotor) for 2 hours at 4°C to pellet EVs on an OptimaTM L-100 XP ultracentrifuge (Beckman Coulter). The supernatant was removed ...
-
bioRxiv - Cell Biology 2024Quote: ... cells were resuspended in PBS and stored in the dark at 4°C until analyzing them with a Navios flow cytometer (Beckman Coulter). At least 10’000 living cells were measured for each sample ...
-
bioRxiv - Cell Biology 2021Quote: ... then finally at 100,000 g for 4 h at 4 ℃ using an SW28 rotor (Beckman Coulter, Fullerton, CA, USA). The pelleted exosomes were collected then subsequently resuspended in PBS ...
-
bioRxiv - Biophysics 2021Quote: ... which were centrifuged at 3000 rpm for 15 minutes at 4°C using a fixed angle centrifuge (Beckman Coulter, Brea, CA, USA). After removal of excess supernatant ...
-
bioRxiv - Biophysics 2020Quote: ... The lysates were clarified by centrifugation (16,000 rpm for 1 h at 4°C, rotor JA 25.50, Beckman Coulter, Brea, California, USA). The supernatant was incubated with amylose resin for 1 h at 4°C and loaded onto a 20 ml chromatography column (Bio-Rad ...