Labshake search
Citations for Beckman :
51 - 100 of 1669 citations for Human Chemokine C X C Motif Receptor 5 CXCR5 Protein since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were diluted with 15 mL of cold PBS and centrifuged at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman). The supernatants were discarded and the pellets (containing EVs ...
-
bioRxiv - Microbiology 2022Quote: ... Sacculi were repeatedly washed with MilliQ water by ultracentrifugation at ∼540,000 x g for 15 min at 20 °C in a TLA-100.3 rotor (OptimaTM Max ultracentrifuge, Beckman) until completely removing SDS traces ...
-
bioRxiv - Microbiology 2023Quote: ... This OMV solution was then pelleted by ultracentrifugation at 100,000 x g for 3h at 4°C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 16.2500) and then bound to 0.1 cell paste volumes of anti-FLAG resin (Sigma M2 ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 8.1000), washed in pre-chilled PBS and resuspended in 20 cell paste volumes of preparation buffer (50 mM Tris pH 8 ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C (SW41 rotor, Beckman). The supernatant was concentrated with a 100-kDa molecular weight cutoff concentrator (Merck Millipore ...
-
bioRxiv - Molecular Biology 2019Quote: ... The 80S fraction was pelleted for 1 h at 436000 x g at 4 °C (TLA-100, Beckman Coulter), resuspended in 20 mM HEPES pH 7.4 ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 97,658 x g for 3 h at 4°C using a SW41Ti rotor (Beckman & Coulter, # 331362). The polysome fractions were collected using the Foxy R1 Fraction Collector and immediately snap frozen with liquid nitrogen and stored at −80 °C ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman), and supernatant transferred to a fresh tube.
-
bioRxiv - Microbiology 2020Quote: ... Cell lysate was then clarified 200 x g for 10 min at 4°C in an Allegra centrifuge (Beckman). Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman) ...
-
bioRxiv - Biophysics 2020Quote: ... and centrifuged at 287,582 x g (90,000 rpm) for 1 hr at 4 °C in a TLA100.2 rotor (Beckman, ref. 362046) in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 ml of IgG Sepharose 6 Fast Flow beads (GE Healthcare Life Sciences ...
-
bioRxiv - Molecular Biology 2022Quote: ... Gradients were spun for 3 hours at 4° C and 36,000 RPM (221,632 x g) on SW41-Ti rotor (Beckman Coulter). Monosome fractions were isolated from each sucrose gradient with Brandel Density Gradient Fractionator using 1.5 mL/min flow speed and 60% CsCl ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 ml of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Microbiology 2022Quote: ... sonicated using a sonicator (Smurt, Microtec) and ultracentrifuged at 100,000 x g for 60 minutes at 4°C (Optima XE-90, Beckman). Protein concentration of the bacterial membrane suspension was determined with Bio-Rad protein assay (BioRad).
-
bioRxiv - Biochemistry 2022Quote: ... 5 mM MgCl 2 and 2 mM DTT and centrifuged at 70,000 x g for 20.5 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions corresponding to the 40S peak were collected ...
-
bioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 42,800 x g for 15 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions of 1 mL were collected using an AKTA system (Cytiva) ...
-
bioRxiv - Microbiology 2022Quote: ... at 4°C for 1.5-2h followed by 180,000 x g (Ti 70i rotor; Beckman Instruments, Inc., Fullerton, CA) at 4°C for 1.5-2h and resuspended in 1mL of phosphate buffered saline (PBS ...
-
bioRxiv - Cell Biology 2020Quote: ... The soluble fractions released by MNase were isolated by taking supernatants after centrifugation at 13,894 rpm (16,000 rcf) at 4 °C for 30 min using SX241.5 rotor in Allegron X-30R (Beckman Coulter). The supernatants were collected and layered onto the 10-22 % linear sucrose gradient solution with buffer SG (15 mM HEPES-KOH [pH 7.4] ...
-
bioRxiv - Biochemistry 2021Quote: ... Eluted fractions were pooled and subjected to a 2.5 h ultracentrifugation at 135,500 x g at 4 °C using a TLA-55 rotor (Beckman-Coulter). Finally ...
-
bioRxiv - Microbiology 2019Quote: ... Gradients were centrifuged at 210,000 x g during 3 h at 4°C using a SW-41 swinging bucket rotor (Beckman) in an Optima L-100 XP Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Biochemistry 2019Quote: ... and centrifuged at 287,582 x g (90,000 rpm) for 1 hr at 4°C in a TLA100.2 rotor (Beckman, ref. 362046) in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman ...
-
bioRxiv - Biochemistry 2021Quote: ... Membranes were collected by ultracentrifugation at 220 000 x g for 90 min at 4°C (45Ti rotor, Beckman).
-
bioRxiv - Biochemistry 2021Quote: ... and the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA25.50 rotor in an Avanti J-E centrifuge (Beckman). The clarified lysate was then added to 10 mL of Ni-NTA Agarose beads (Invitrogen ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... which was spun in a ultracentrifuge at 30,000 x g for 2h at 4°C (SW 60 Ti rotor, Beckman) The pellet was resuspended in 20 μl of PBS for 1 h at 4 °C ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Neuroscience 2023Quote: ... DTT-treated EVs were pelleted at 100,000 x g for 70 min at 4°C in a TLA100 rotor (Beckman). The supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatant was transferred to fresh tubes and centrifuged at 100,000 x g for 70 min at 4°C using a Ti45 rotor (Beckman). The 100,000 x g pellets were resuspended in 1 mL ice-cold PBS and brought to 60 mL using PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k x g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... The supernatant was subjected to a second round of ultracentrifugation at 100,000 x g for 1 hour at 4°C in a Type 45Ti rotor (Beckman) to pellet cell membranes ...
-
bioRxiv - Plant Biology 2023Quote: ... Approximately 250 µl of crude EV sample resuspended in 20 mM Tris-HCl pH 6.0 was slowly dispensed on top of the column and centrifuged at 100,000 x g for 17 h at 4 ⁰C (SW 41 Ti rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... 20µM ATP and 1 mM DTT and subsequently sedimented (100,000 x g, 15 min, 4°C, TLA-100 rotor) in an Ultima MAX-XP ultracentrifuge (Beckman). For competition assays ...
-
bioRxiv - Plant Biology 2023Quote: ... It was then centrifuged again at 100,000 x g for 1 h at 4 ⁰C (TLA 55 rotor, Beckman Coulter ...
-
bioRxiv - Plant Biology 2023Quote: ... The tubes were then centrifuged at 100,000 x g for 1 h at 4 ⁰C (TLA 55 rotor, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Plant Biology 2023Quote: ... The supernatant from this step was decanted into the new tubes and centrifuged at 39,800 x g for 2 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Neuroscience 2024Quote: ... by centrifugation at 5,000 x g at 4°C for 30 minutes in a fixed angle rotor (Beckman Coulter). The qEV column washed with 1x PBS was then loaded with 500 µL of concentrated supernatant followed by 2.5 mL PBS to collect 3 mL void volume ...
-
bioRxiv - Cell Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 100,000 x g for 2 h at 4 °C to sediment small EVs (Optima L-80K ultracentrifuge, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... lysates were centrifuged at 60,000 x g (4 °C) for 45 min (Beckman Avanti JXN-26 (rotor: JA 25.5)) and immediately supplemented with 10 mL pre-washed Ni2+-NTA agarose (QIAGEN ...