Labshake search
Citations for Beckman :
51 - 100 of 1630 citations for 3 2 5 Dioxoimidazolidin 4 yl propanoic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... 4°C for 2 h (SW 32 Ti swinging-bucket rotor, Optima LE-80K Beckman Coulter) using a 25% w/v sucrose cushion ...
-
bioRxiv - Cell Biology 2021Quote: ... The post-nuclear supernatants were ultracentrifuged using SW41Ti rotor at 100,000 g for 3 h at 4 °C on Optima L-90K (Beckman Coulter). The fraction between 0.4–0.5 M sucrose was collected ...
-
ACE2-lentiviral transduction enables mouse SARS-CoV-2 infection and mapping of receptor interactionsbioRxiv - Microbiology 2021Quote: ... UV-inactive SARS-CoV-2 was then partially-purified using a 20% sucrose cushion centrifuged at 175,000 x g for 3-4 hr using SW32Ti rotor (Beckman Coulter). The sample that has passed through the sucrose was collected and concentrated using Amicon Ultra-15 Centrifugal Filter Units with 100 kDa cutoff (Merck Millipore) ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 4°C for 3 h at 100,000 g by using Avanti J-30XP (Beckman, USA), and the fractions were collected using a Brandel Fractionation System (USA ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Molecular Biology 2024Quote: ... The gradient was centrifuged at 54,000 rpm for 3 h at 4 °C using a SW55 Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Equivalent amounts of cell lysates prepared as described above were loaded onto the sucrose gradients and spun at 35,000 g for 3 hours at 4°C in a SW41 rotor (Beckman Coulter). After centrifugation the polysomes were fractionated and absorbance was monitored at 254 nm for RNA and 680 nm for GFP using the TriaxTM Flowcell (BioComp Instruments) ...
-
bioRxiv - Genomics 2020Quote: ... The PCR products were purified by using 1.3X Agencourt AMPure XP beads (2 or 3 cycles; Beckman Coulter) and evaluated by using an Agilent High Sensitivity DNA Kit on an Agilent 2100 Bioanalyzer (Agilent) ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min. at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min. at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Biochemistry 2021Quote: ... 2 mM Mg(OAc)2 and 150 mM KCl) and centrifuged at 116,000 xg for 5 h at 4°C in a TL100.3 rotor (Beckman). The ribosome pellet was resuspended by orbital shaking (1 h at 4°C ...
-
bioRxiv - Genomics 2024Quote: ... by centrifuging the chip facing downwards at 3,220 g for 5 min at 4 °C and purified with 1.5 × Ampure XP beads (Beckman), followed by DNA QC and trace checking.
-
bioRxiv - Neuroscience 2020Quote: ... and were centrifuged at 82,500 x g for 2 h at 4 °C (Beckman SW28 swing rotor). The band between 1.0 and 1.2 M sucrose was collected as the synaptosome fraction and diluted with 80 mM Tris-HCl (pH 8.0) ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... in 67 mM HEPES-KOH pH 7.2) after 2 h of ultracentrifugation (4 °C, 5000 RPM, Beckman SW41 ...
-
bioRxiv - Cancer Biology 2024Quote: ... centrifuged twice at 100,000 × g for 2 h at 4°C (Beckman Coulter Optima XE-90 Ultracentrifuge). The supernatant was replaced with DPBS between ultracentrifugation spins ...
-
bioRxiv - Molecular Biology 2023Quote: ... followed by ultracentrifugation at 70k RPM at 4⁰C for 2 h (Optima TLX ultracentrifuge, Beckman Coulter). Ribosome pellets were then resuspended in Trizol and extracted for RNA according to manufacturer’s instructions ...
-
bioRxiv - Microbiology 2024Quote: ... at 28 K rpm for 2 h at 4°C in an SW32 swing-bucket rotor (Beckman). SG3ΔEnv virions were thoroughly resuspended using 500 μl Hepes/Salt buffer per tube ...
-
bioRxiv - Genomics 2024Quote: ... the virus was ultra-centrifuged at 24,000 rpm at 4 C° for 2 h using SW32Ti (Beckman) and the virus pellets were resuspended in RPMI media with 10% FBS to result in a 20-fold concentrated virus and stored at −80 C°.
-
bioRxiv - Microbiology 2020Quote: ... and overlaid with 6 ml of 30% and 3 ml of 5% sucrose (w/v) followed by centrifugation at 32,000 rpm in SW41 rotor (Beckman Coulter) for 20 h ...
-
bioRxiv - Neuroscience 2020Quote: ... reverse 5’-CTTA TTAGTCAGTCAGAAACAAC-3’).ThePCR amplicon was purified using RNAse-free SPRI beads (Agencourt RNAclean XP, Beckman-Coulter A63987) and then used for in vitro transcription with the HiScribe T7 ARCA mRNA Kit (with tailing ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Microbiology 2020Quote: ... The supernatant was ultracentrifuged at 120,000 g for 3 h at 4°C using an MLS-50 rotor (Beckman Coulter, USA) to collect 120k pellet vesicles ...
-
bioRxiv - Biophysics 2021Quote: The aggregation products formed in Eppendorf tubes under agitation conditions at pH 3 and pH 4 were centrifuged using an Optima MAX-XP ultracentrifuge (Beckman Coulter) in a TLA-55 rotor at 40,000 rpm at 20°C for 45 min ...
-
bioRxiv - Microbiology 2024Quote: ... and resolved by ultracentrifugation at 36,000 rpm for 3 h at 4°C with the fastest braking in Optima XPN-80 Ultracentrifuge equipped with SW-41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 mL/fraction ...
-
bioRxiv - Biophysics 2024Quote: ... Each seed mix was clarified using an ultra-centrifuge (Beckman Optima MAX-XP, 90,000 RPM, 4°C, 5 min) then snap-frozen in small aliquots and stored at -80°C ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Microbiology 2024Quote: ... Samples within each biological replicate were centrifuged simultaneously for 2.5 h at 209,490 x g and 4°C using the SW41Ti rotor in an LE-80 ultracentrifuge (Beckman). Subsequently ...
-
bioRxiv - Molecular Biology 2024Quote: ... Proliferation was measured after 4-5 days either by trypan-blue mediated count (Vi-cell blu counter, Beckman Coulter), or by adding the Prestoblue dye (Life Technologies ...
-
bioRxiv - Molecular Biology 2021Quote: ... Gradients were centrifuged at 36000 RPM for 2 hours at 4°C in a SW41 rotor (Beckman Coulter) and then fractions were collected using a gradient collector (Teledyne ISCO gradient station ...
-
bioRxiv - Microbiology 2020Quote: ... Purification was done by ultracentrifugation for 2 h at 154,000xg at 4°C in a SW41 rotor (Beckman) using a two-step sucrose gradient (20%/50% w/v in HNE) ...
-
bioRxiv - Cell Biology 2020Quote: ... the cleared supernatant was ultracentrifuged at 47,000 g for 2 hours at 4 °C using the JA25.50 rotor (Beckman). The virus was resuspended overnight in 180 μL D10 medium at 4 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... 4 °C for 2 h in an Optima L-100XP ultracentrifuge (with SW 55 Ti rotor, Beckman Coulter). Fractionation was done manually by collecting every 200 μl volume from the top till the bottom of each centrifuge tube ...
-
bioRxiv - Molecular Biology 2023Quote: ... Digested extracts were then loaded on 1 M sucrose cushions 116 and centrifuged at 70,000 rpm for 2 hours at 4°C in a TLA100.4 rotor (Beckman). Ribosome pellets were resuspended in 300 µl of TRIzol reagent (Invitrogen) ...
-
bioRxiv - Plant Biology 2020Quote: MP of pollen protoplasts was assessed by staining with 1 µM DiBAC4(3) for 5 min (Breygina et al. 2010) on Gallios flow cytometer (Beckman Coulter), analysis was performed with FlowJo software (TreeStar) ...
-
bioRxiv - Molecular Biology 2024Quote: ... bottom layer was made by diluting OptiPrep™ solution with clarified HM or digesta sample (2.25 mL OptiPrep™ + 0.75 mL sample = 3 mL) into a 5 mL open-top thin wall ultra-clear tube (Beckman Coulter). A discontinuous gradient was made with 40% (w/v) ...
-
bioRxiv - Pathology 2024Quote: ... with primers located in the U3 region of the 5’ and 3’ LTRs (Figure S1) and purified using “1X AmpureXP beads” (Beckman Coulter). ONT (Oxford nanopore technologies ...
-
bioRxiv - Plant Biology 2021Quote: ... sucrose was transferred to the bottom of the tube using a Pasteur pipette and centrifuged at 27,000 rpm for 3 hours at 4° C using an SW28 Ti rotor (Beckman Coulter, Brea, CA). Each pellet containing the virus particles was resuspended in 1 mL resuspension buffer overnight with gentle shaking at 4 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... and centrifuged at 16000 ×g for 3 hours at 4 °C in an Avanti J-25 centrifuge (Beckman Coulter Life Sciences, USA) with a JA-25.50 fixed-angle aluminum rotor (Beckman Coulter Life Sciences ...