Labshake search
Citations for Beckman :
901 - 950 of 1337 citations for 7 Nitro 3 4 dihydro 2H benzo b oxepine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... Lentiviral supernatant was collected 48 hours after transfection and centrifuged for 2 hours by ultracentrifugation at 25,000 RPM at 4°C (Beckman Coulter). Pellets were resuspended in DPBS and frozen in -80°C until used ...
-
bioRxiv - Neuroscience 2022Quote: ... 10 mM Tris-HCl) and centrifugated at 24,000 rpm for 1 h at 4°C in a SW41Ti Swinging-Bucket Rotor (Beckman Coulter). Supernatant was discarded and nuclei pellets were re-suspended in 800 µL of PBS ...
-
bioRxiv - Biochemistry 2019Quote: ... 10,000 events were then immediately analyzed from 1 of the 4 150 µL aliquots using a CytoFLEX benchtop cytometer (Beckman). All subsequent chase time points were collected using this initial analysis as a reference ...
-
bioRxiv - Cell Biology 2019Quote: ... and spun down at 4° C for 10 minutes at 12096×g using an Avanti J-25 centrifuge (Beckman Coulter). The sonicated lysate was incubated for 2 hours at 4 ° C with beads (Glutathione High Capacity Magnetic Agarose Beads ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant was then slowly mixed with an equal volume of 4 M ammonium sulphate (2 M final concentration) at 4°C for 1 hour and spun at 10 K rpm using a JA-17 rotor (Beckman). Pellets containing RAD51 were suspended in 25 ml of resuspension buffer (0.5 M KCl ...
-
bioRxiv - Molecular Biology 2019Quote: ... and then centrifuged for 150 min at 39,000 rpm and 4°C in an Optima L-100XP Ultracentrifuge (Beckman-Coulter) using a SW41Ti rotor without brake ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant from 2,000 × g was transferred to 30mL conical tube and then centrifuged at 10,000 × g for 10 min at 4°C (# Avanti J-E JA25-50 Beckman Coulter). The supernatant from this spin was filtered through a 0.22-μm mesh filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Biochemistry 2019Quote: ... The V and VI fractions were then diluted separately to a total volume of 12mL with dfPBS and centrifuged at 100,000 × g for 70 min at 4°C (# Optima-XE SW41 Beckman Coulter). The final pellet from each fraction was resuspended in 30 μL of dfPBS ...
-
bioRxiv - Cell Biology 2020Quote: ... The supernatant of MNase treated chromatin were overlaid onto the sucrose gradient and spun at 32000 rpm (124,436 rcf) for 13 h at 4 °C using SW55Ti rotor (Beckman Coulter) in Beckman Optima L80.
-
bioRxiv - Cell Biology 2020Quote: ... 1 mM EGTA) and spun at 32000 rpm (124,436 rcf) and 4 °C for 13 h using SW55Ti rotor (Beckman Coulter) in Beckman Optima L80 ...
-
bioRxiv - Microbiology 2021Quote: ... The treated cells were pelleted by centrifugation at 12,000×g at 4 °C for 20 min (Beckman Allegra X-15R) and the supernatant was discarded ...
-
bioRxiv - Molecular Biology 2021Quote: ... cell lysates were cleared by centrifugation at 4 °C for 5 minutes at 16000 x g and loaded onto ice-cold 15-50 % sucrose-CHX gradients and ultracentrifuged at 4 °C for 2 hours at 274 000 x g in a SW-41Ti rotor (Beckman). Gradients were fractionated and monitored at an absorbance of 254 nm with a fraction collector (BioComp Instruments ...
-
bioRxiv - Plant Biology 2020Quote: ... The insoluble cell debris was removed via centrifugation for 30 min at 4°C and 20,000 rpm (JA-25.50, Beckman Coulter®). The supernatant was incubated for 1 h with low agitation and with 1.2 ml Glutathione-sepharose (GE-Healthcare ...
-
bioRxiv - Plant Biology 2020Quote: ... the cells were harvested by centrifuging for 30 min at 4°C and 6,000 rpm (JA-10, Beckman Coulter®). The cells were resuspended in 1x PBS (pH 7.3 ...
-
bioRxiv - Immunology 2020Quote: ... Then the concentrated supernatant was ultracentrifuged at 110,000 g for 1 hour at 4°C (Beckman Coulter L100k, company name) to sediment the vesicular fraction into a pellet ...
-
bioRxiv - Neuroscience 2019Quote: ... The supernatant was layered onto a 20% sucrose cushion prepared in the same lysis buffer and then centrifuged at 186,000 x g for 2 h at 4 °C in a TLA-55 rotor ultracentrifuge (Beckman Coulter). RNA was isolated from the ribosome-enriched pellet using TRIzol LS reagent according to manufacturer’s instructions (Invitrogen).
-
bioRxiv - Molecular Biology 2020Quote: ... Centrifugation was conducted at 40,000 rpm for 2 hours at 4°C in a SW-41 Ti rotor (Beckman Coulter), and fractions were collected from the top of the gradient (#1 to #20) ...
-
bioRxiv - Genomics 2021Quote: ... The tubes were then balanced and centrifuged in a Beckman Coulter L7-65 Ultracentrifuge at 25,000rpm at 4°C for 2hr using a Beckman Coulter SW28 swing bucket rotor (Beckman Coulter). The supernatant was carefully removed via aspiration ...
-
bioRxiv - Genomics 2019Quote: ... 37°C for 30 min then cooled to 4°C before proceeding to a 2.2x Agencourt RNAClean XP cleanup (Beckman Coulter). The RNA was eluted in 11.5 μL nuclease-free water ...
-
bioRxiv - Biochemistry 2019Quote: ... Ribosomes were pelleted via centrifugation at 63,000 x g for 16-18 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosome pellets were dissolved in resuspension buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Biochemistry 2019Quote: ... Fractions containing 40S and 60S ribosomal subunits as identified via absorption at 254 nM were pelleted via centrifugation at 63,000 x g for 20 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosomal subunits were resuspended in storage buffer (30 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Biochemistry 2019Quote: ... The homogenate was centrifuged for 10 min at 10,000×g at 4°C in a Ti-70 rotor and Optima XPN-90 ultracentrifuge (Beckman Coulter) and the supernatant was removed ...
-
bioRxiv - Molecular Biology 2020Quote: ... by centrifuging at 63,000 x g for 18 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). Pellets were resuspended and these samples were analysed by mass spectrometry.
-
bioRxiv - Immunology 2021Quote: ... Ultracentrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for two hours at 4°C using a Beckman SW28 rotor (Beckman Coulter) was performed to pellet the viruses through the sucrose cushion while soluble egg proteins were removed ...
-
bioRxiv - Cell Biology 2020Quote: ... The ultracentrifugation (UC) steps were performed in refrigerated conditions (4°C) with rotors 50.4Ti or 70Ti (Beckman-Coulter, California, US).
-
bioRxiv - Biochemistry 2020Quote: ... Protein-liposome complexes were separated from unbound protein by centrifugation (2 h at 45.000 rpm, 4 °C, MLS50 rotor -Beckman Coulter) in the density gradient ...
-
bioRxiv - Physiology 2021Quote: ... the supernatant was ultracentrifuged at 100,000 g for 70 min at 4°C using an MLA-55 rotor (Beckman Coulter) and an Optima MAX-TL Ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... Samples were ultracentrifuged at 120,000 × g for 90 minutes at 4 °C in an Optima XPN-80 ultracentrifuge (Beckman Coulter) using a SW55 Ti swinging-bucket rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... and cellular debris was removed by centrifugation at 90 000 x g for 20 min at 4°C (45 Ti rotor, Beckman). Membranes were collected by ultracentrifugation at 220 000 x g for 90 min at 4°C (45Ti rotor ...
-
bioRxiv - Cell Biology 2020Quote: ... This crude mitochondrial pellet was further purified on a discontinuous percoll gradient (buffer composition 15/23/40% sucrose) by centrifugation (40,000 x g, 1hr, 4°C) in an SW41 rotor (Beckman Coulter) and enriched mitochondria were collected from the 23-40% interface (adapted from [76]) ...
-
bioRxiv - Cell Biology 2020Quote: ... Tubes were centrifuged twice at 100,000 x g for 70 min at 4°C with a Beckman ultracentrifuge (32Ti rotor from Beckman Coulter). Supernatants were removed and the pellets resuspended in phosphate-buffered saline (PBS ...
-
bioRxiv - Microbiology 2020Quote: ... Microbial cells were collected from to 2-3 L of water samples by centrifugation at 12,000 × g and 4°C for 20 min in a high-speed centrifuge (Beckman, USA). Total genomic DNA was extracted using AxyPrep™ Genomic DNA Miniprep Kit (Axygen ...
-
bioRxiv - Microbiology 2020Quote: ... Two distinct fractions were collected from the first CsCl density gradient centrifugation (17,000 × g, 60 min, 4°C in a fixed angle MLA-55 rotor, Beckman Coulter), each were sedimented (4000 × g ...
-
bioRxiv - Molecular Biology 2021Quote: ... lysates were spun for 24 h at 4°C at 50000 rpm in a Type 70 Ti rotor (Beckman Coulter) through a 40 % (w/v ...
-
bioRxiv - Microbiology 2021Quote: ... purified by ultracentrifugation through a sucrose cushion (25% weight/volume in Tris-NaCl-EDTA buffer) for 75 min at 4°C and 28,000 rpm using a SW 32 TI rotor (Beckman Coulter), resuspended in serum-free RPMI 1640 or DMEM medium and stored in small aliquots at −80°C ...
-
bioRxiv - Immunology 2020Quote: ... previously coated over-night at 4 °C with 1.5 μg per well of anti-Igκ or anti-IgM (Beckman Coulter) in PBS and saturated with culture medium ...
-
bioRxiv - Microbiology 2021Quote: ... The resting supernatants were filtered through 0.45µm syringe filters and ultracentrifuged at 100,000 x g for 1h at 4°C (SW41 Ti swinging-bucket rotor, Beckman Coulter). The supernatant was discarded and the pellet suspended in 0.22 µm-pore filtered or 0.02 µm-pore filtered (for Flow Cytometry analysis ...
-
bioRxiv - Immunology 2021Quote: ... 1×106 thawed PBMCs were centrifuged (750×g for 5 minutes at 4°C) using a swinging bucket rotor (Beckman Coulter Avanti J-15RIVD with JS4.750 swinging bucket ...
-
bioRxiv - Microbiology 2022Quote: ... clarified using 0.2 µm filter and pelleted at 54,000 rpm (180,000 ×g) for 2 hours at 4 °C in a TLA-55 rotor in an Optima Max-XP tabletop ultracentrifuge (Beckman). The supernatant was removed ...
-
bioRxiv - Biochemistry 2022Quote: ... A soluble fraction was obtained after centrifugation of the lysate at 19,000 rpm for 40 min at 4 °C performed using Avanti J-E with a rotor JA-20 (BECKMAN COULTER) to remove insoluble debris.
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Ribosomes were pelleted by centrifugation at 63,000g for 16–19 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). For all ultracentrifugation steps indicated here ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... were pelleted by centrifugation at 63,000g for 20 hrs at 4°C in a Type 80 Ti rotor (Beckman Coulter) as described above ...
-
bioRxiv - Cell Biology 2022Quote: ... OptiPrep step-gradient and centrifuged for 60 min at 19,210 × g at 4 °C in a TLS-55 rotor (Beckman Coulter). The ROS band was collected with a 18G needle ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was dounced for 10 strokes on ice and cleared via centrifugation at 80K rpm for 10 minutes at 4°C using a TLA 110 rotor (Beckman) in a tabletop Beckm an ultracentrifuge ...
-
bioRxiv - Plant Biology 2022Quote: ... in a 12.5 mL ultracentrifuge tube and centrifuged for 1 h at 4°C at 200,000 × g in a swinging bucket rotor (Sorval SW-41 Ti; Beckman Coulter), with moderate acceleration and deceleration ...
-
bioRxiv - Microbiology 2022Quote: ... purified by ultracentrifugation through a sucrose cushion (25% weight/volume in Tris-NaCl-EDTA buffer) for 75 min at 4°C and 28,000 rpm using a SW 32 TI rotor (Beckman Coulter), resuspended in serum-free DMEM medium and stored in small aliquots at −80°C ...
-
bioRxiv - Microbiology 2022Quote: ... Pseudotypes and VLPs were then concentrated by ultracentrifugation (20,000 RPM, 4 ºC, 1.5h, Beckman Coulter Optima XPN-100, SW32Ti rotor) through a 20% (w/v ...
-
bioRxiv - Microbiology 2022Quote: ... at 20 KPSI at 4°C and then centrifuged at 19 000 RPM in a JA-25.50 rotor (Beckman Coulter) for 30 minutes at 4°C ...
-
bioRxiv - Neuroscience 2023Quote: ... followed by ultracentrifugation at 100,000 x g for 60 minutes at 4°C (SW 41 Ti Rotor, Beckman Coulter Inc). For size-exclusion chromatography (SEC ...
-
bioRxiv - Neuroscience 2022Quote: ... trypsin-dissociated cells on 96-well plates were centrifuged at 1,000g for 5 min at 4°C using a swinging-bucket rotor for microplates (Beckman S6096) in an Allegra X-30R centrifuge (Beckman) ...