Labshake search
Citations for Beckman :
701 - 750 of 1463 citations for 2 Chloro 3 4 cyanobenzoyl pyridine since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...
-
bioRxiv - Microbiology 2020Quote: ... supernatants were harvested and filtered through a 0.45μm filter and centrifuged at 27,000 rpm for 3h at 4°C with a SW41 rotor and Optima L-90 centrifuge (Beckman). Pellets were resuspended in PBS prior to use for western blot analysis.
-
bioRxiv - Microbiology 2020Quote: ... The gradient was centrifuged for 17 h at 4°C and 100,000 rcf (23,700 rpm) using an SW 40 Ti rotor (Beckman Coulter), followed by manual fractionation into 20 590 μl fractions and measurement of the A260 nm of each fraction ...
-
bioRxiv - Microbiology 2020Quote: ... the 100,000xg centrifugation was performed for 1h at 4°C using a SW41 TI swinging bucket rotor (Beckman Coulter). The pellet was then resuspended in 50 μL or 1500 μL of D-MEM for subsequent analysis.
-
bioRxiv - Microbiology 2021Quote: ... Filtered supernatants were pelleted at 60,000 g for 16 hours at 4 °C in a SW28 Ti rotor (Beckman), and the resulting pellet was resuspended in TNE buffer (50 mM Tris-HCl [pH 7.4] ...
-
bioRxiv - Molecular Biology 2020Quote: ... The reactions were then spun for 20 min at 120,000 rpm at 4°C (TLA120.1 rotor, Beckman Coulter, USA) to remove aggregates and ribosomes ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman), and supernatant transferred to a fresh tube.
-
bioRxiv - Microbiology 2020Quote: ... Cell lysate was then clarified 200 x g for 10 min at 4°C in an Allegra centrifuge (Beckman). Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman) ...
-
bioRxiv - Biophysics 2020Quote: ... and centrifuged at 287,582 x g (90,000 rpm) for 1 hr at 4 °C in a TLA100.2 rotor (Beckman, ref. 362046) in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 ml of IgG Sepharose 6 Fast Flow beads (GE Healthcare Life Sciences ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 ml of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Microbiology 2022Quote: ... sonicated using a sonicator (Smurt, Microtec) and ultracentrifuged at 100,000 x g for 60 minutes at 4°C (Optima XE-90, Beckman). Protein concentration of the bacterial membrane suspension was determined with Bio-Rad protein assay (BioRad).
-
bioRxiv - Cell Biology 2022Quote: ... and centrifuged at 10,000g and 4°C for 30 minutes (SW41 rotor, Optima XPN-100 ultracentrifuge; Beckman Coulter, Inc.) to remove any potential large debris ...
-
bioRxiv - Biochemistry 2022Quote: ... 5 mM MgCl 2 and 2 mM DTT and centrifuged at 70,000 x g for 20.5 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions corresponding to the 40S peak were collected ...
-
bioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 42,800 x g for 15 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions of 1 mL were collected using an AKTA system (Cytiva) ...
-
bioRxiv - Microbiology 2022Quote: ... at 4°C for 1.5-2h followed by 180,000 x g (Ti 70i rotor; Beckman Instruments, Inc., Fullerton, CA) at 4°C for 1.5-2h and resuspended in 1mL of phosphate buffered saline (PBS ...
-
bioRxiv - Biochemistry 2022Quote: ... The crude extract was centrifuged at 200,000 g for 1 h at 4 °C (Beckman Coulter Optima LE-80K). The membrane pellet was homogenized and solubilized in 20 mM HEPES (pH 7.8 ...
-
bioRxiv - Genetics 2022Quote: ... The lysate was centrifuged at 2000 rpm for 10 min at 4 °C in a JA-20 rotor (Beckman). The supernatant from the previous step was centrifuged in a Beckman Coulter high speed centrifuge equipped with a JA-20 rotor at 6000 rpm for 20 min at 4 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... The gradient was centrifuged at 200,000 × g for 20 h at 4°C (35,000 rpm with # Optima-XE SW41 Beckman Coulter). The gradient was collected in 2-mL fractions ...
-
bioRxiv - Neuroscience 2020Quote: ... this second supernatant was centrifuged for 4 hrs at 100,000g (Optima MAX-XP ultracentrifuge, TLA-100.3 rotor, Beckman Coulter). Following ultracentrifugation ...
-
bioRxiv - Plant Biology 2020Quote: ... and centrifuged at 131,500 × g for 30 min at 4 °C using a SW 32 Ti rotor (Beckman Coulter). Thylakoid membranes sedimented in 1.3 M sucrose cushion were collected and washed with 25 mM Tricine-KOH (pH 7.8) ...
-
bioRxiv - Biochemistry 2022Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant from enzymatic digestion of cardiovascular tissues underwent further ultracentrifugation at 10,000xg for 10 minutes at 4°C (Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... The soluble fractions released by MNase were isolated by taking supernatants after centrifugation at 13,894 rpm (16,000 rcf) at 4 °C for 30 min using SX241.5 rotor in Allegron X-30R (Beckman Coulter). The supernatants were collected and layered onto the 10-22 % linear sucrose gradient solution with buffer SG (15 mM HEPES-KOH [pH 7.4] ...
-
bioRxiv - Biochemistry 2021Quote: ... Eluted fractions were pooled and subjected to a 2.5 h ultracentrifugation at 135,500 x g at 4 °C using a TLA-55 rotor (Beckman-Coulter). Finally ...
-
bioRxiv - Biochemistry 2021Quote: ... Reaction mixtures were incubated for 30 minutes and centrifuged at 100,000g at 4°C for 1 hr using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Cancer Biology 2020Quote: ... Lysates were loaded on 15-50% sucrose gradient and centrifuged at 35,000 rpm for 2.5 h at 4°C in a SW41 rotor (Beckman Coulter). Polysomes were separated through a live optical density (OD ...
-
bioRxiv - Molecular Biology 2020Quote: ... Ten OD260 units were loaded on a 10–50% sucrose gradient and centrifuged at 187,813 × g for 2.75 h at 4 °C in a SW41Ti rotor (Beckman Coulter). The fractions of the gradient were collected ...
-
bioRxiv - Cell Biology 2021Quote: ... The crude extract was clarified by high-speed centrifugation (60 min at 36,000 ×g at 4 °C) by Beckman Coulter centrifuge.
-
bioRxiv - Plant Biology 2021Quote: ... A soluble fraction was obtained by ultracentrifugation at 200,000 g for 20 minutes at 4°C on a Beckman Optima Ultracentrifuge (Beckman). Two biological replicates for SEC and IEX column separations were prepared in this manner.
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... IL-4 and IFN-γ concentrations were determined using DTX 880 Multimode Detector (Beckman Coulter, Inc., Brea, CA, USA) set to 450 nm.
-
bioRxiv - Biochemistry 2021Quote: ... The gradient was centrifuged at 100,000 g for 16 hours at 4°C (rotor MLS-50, Beckman Optima MAX). Twelve fractions of 400 μL were collected from the top of the gradient and pelleted by UC at 100,000 g for 2 hours at 4°C (Figure 1) ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Biochemistry 2021Quote: ... Samples were centrifuged at 50,000 rpm (∼166,000 × g) for 3h at 4°C using TLS-55 rotor (Beckman Coulter) in an Optima benchtop ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Biochemistry 2021Quote: ... Membranes were collected by ultracentrifugation at 220 000 x g for 90 min at 4°C (45Ti rotor, Beckman).
-
bioRxiv - Biochemistry 2021Quote: ... and the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA25.50 rotor in an Avanti J-E centrifuge (Beckman). The clarified lysate was then added to 10 mL of Ni-NTA Agarose beads (Invitrogen ...
-
bioRxiv - Cell Biology 2021Quote: ... The lysate was clarified by centrifugation for 30 min at 35,000 rpm at 4°C in a Type 45 Ti rotor (Beckman). Cleared lysate was incubated with 2 mL glutathione-sepharose (Fisher Scientific ...
-
bioRxiv - Cell Biology 2021Quote: ... The lysate was clarified by centrifugation for 30 min at 35,000 rpm at 4°C in a Type 45 Ti rotor (Beckman). Cleared lysate was incubated with 2 mL Ni-NTA agarose (Qiagen ...
-
bioRxiv - Immunology 2022Quote: ... stained bacteria were then sonicated for 4 min (0.5 cycle, 75 A, VialTweeter) followed by determination of concentration using flow cytometry (CytoFlex; Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was clarified by centrifugation at 48000×g for 45 min at 4°C using a JA-25.50 rotor (Beckman), and applied on a XK 16/20 chromatography column (Cytiva ...
-
bioRxiv - Biochemistry 2022Quote: ... The elutions were combined and centrifuged at 100,000 rpm at 4°C for 40 minutes in a TLA120.2 rotor (Beckman Coulter) before resuspension of the ribosomal pellet in RNC buffer containing 1 μM ternatin-4 ...
-
bioRxiv - Developmental Biology 2022Quote: ... Gradients were centrifuged at 35.000 g for 3h at 4°C in an ultracentrifuge using the SW40ti rotor head (Beckman). Fractions of 1 mL were collected from the top at 1 mL/min ...
-
Reducing mitochondrial ribosomal gene expression does not alter metabolic health or lifespan in micebioRxiv - Cell Biology 2022Quote: ... and then purified using 30% Percoll gradient ultracentrifugation at 95,000g for 30 minutes at +4°C (Beckman sv41 rotor). Purified mitochondria were treated 1:200 with a protease inhibitor cocktail (Thermo Fisher Scientific HALT PI ...
-
bioRxiv - Genomics 2022Quote: ... All samples were acquired on a Beckman Coulter CytoFLEX S with 4 lasers (405nm, 488nm, 561nm, 638nm) (Beckman Coulter), and operated by CytExpert Software v2.3 (Beckman Coulter ...
-
bioRxiv - Neuroscience 2022Quote: ... and ultracentrifuged at 25,000 g for 20 min 4°C (or 50,000 g for 30 min 4°C) in a Beckman TLA100.3 rotor (Optima™ TLX Ultracentrifuge, Beckman). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...