Labshake search
Citations for Bio-Rad :
1701 - 1750 of 6365 citations for Mouse Cytochrome C Oxidase Subunit II COX2 MT CO2 ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... 6µg of Round or Rod-shaped CCMVTT-VLPs were mixed with 2x mercaptoethanol and heated at 95°C for 3 minutes and then loaded into Any kD Mini-PROTEAN TGX precast protein gels (BIO-RAD). Gel was run for 35min at 180V ...
-
bioRxiv - Microbiology 2021Quote: ... boiled for 5 min at 95 °C and separated by discontinuous sodium dodecyl sulfate (SDS) 4-15% polyacrylamide gel electrophoresis (SDS-PAGE precast gels, Bio-Rad). The SDS-PAGE gels were stained in Coomassie Blue solution (Bio-Rad).
-
bioRxiv - Genomics 2020Quote: ... FLAG immunoprecipitates were eluted at 95°C for 10 minutes and GFP immunoprecipitates were eluted at 60°C for 20 minutes into 1 X SDS-Page Buffer (Bio-Rad) supplemented with 5% BME ...
-
bioRxiv - Neuroscience 2022Quote: Samples from m7GTP pull-down assays and lysates were boiled at 70°C for 10 min in Laemmli sample buffer (Bio-Rad) and resolved in 10% or 4-15% gradient SDS-PAGE gels ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were boiled at 95 °C for 5 minutes and loaded to SDS-polyacrylamide gel electrophoresis (PAGE) and transferred to nitrocellulose membranes (162-0112, Bio-Rad). Immunoblot analysis was performed with the following antibodies ...
-
bioRxiv - Biophysics 2022Quote: ... After boiling the beads at 95°C for 5 min in 2X Laemmli sample buffer with 5% β-mercaptoethanol (Bio-Rad), the immunoprecipitated protein was resolved on 10% SDS-PAGE gels and then transferred onto 0.45 μm PVDF membrane (GE ...
-
bioRxiv - Cell Biology 2022Quote: ... Proteins were heated in reducing Laemmli sample buffer at 95°C and resolved in SDS-PAGE protein gel and transferred to PVDF membrane (Bio-Rad). Membranes were blocked using 5% BSA (Sigma ...
-
bioRxiv - Cell Biology 2022Quote: ... After centrifugation at 14000 rpm for 20 min at 4°C the supernatant was collected and protein concentration determined by the Bradford protein assay (Bio-Rad). Fifty micrograms of total extract were then loaded in SDS-polyacrylamide gels and transferred onto nitrocellulose membranes for western blot analysis ...
-
bioRxiv - Cell Biology 2022Quote: ... separated into an 8%-12% SDS-PAGE gels and transferred to a nitrocellulose Hybond-C membranes using a Trans-Blot Turbo Transfer System (Bio-Rad). Membranes were blocked with 5% milk in PBS-0.1% Tween-20 (Sigma-Aldrich ...
-
bioRxiv - Genomics 2022Quote: ... and incubated at 65°C for 3 mins before running 1% agarose-Etbr gel electrophoresis to detect the cleavage efficiency by ChemiDoc system (Bio-Rad).
-
bioRxiv - Molecular Biology 2022Quote: ... The libraries were eluted from the gel by freezing the gel pieces at −20°C for 30 min in Freeze ‘N Squeeze DNA gel extraction spin columns (Bio-Rad) and recovering the solution by immediate centrifugation of the columns at room temperature ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were boiled for 5 min at 95°C before separation on a gradient 4 to 20% sodium dodecyl sulfate (SDS)-polyacrylamide gel (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for semidry transfer (Bio-Rad) ...
-
bioRxiv - Immunology 2022Quote: ... denatured for 10 min at 95 °C and loaded on a 10% SDS-polyacrylamide gel (SDS-PAGE) and separated for 45 min at 200 V (Bio-Rad). Samples were transferred to a nitrocellulose membrane (TransBlot Turbo ...
-
bioRxiv - Microbiology 2022Quote: ... samples were incubated at 95°C for 5 or 10 min and then resolved on TGX Stain-free gel (Bio-Rad). The proteins were transferred onto 0.2 μm nitrocellulose membranes using Trans-Blot Turbo Transfer (Bio-Rad ...
-
bioRxiv - Microbiology 2022Quote: ... samples were incubated at 95°C for 5 or 10 min and then resolved on TGX Stain-free gel (Bio-Rad). The proteins were transferred onto 0.2 µm nitrocellulose membranes using Trans-Blot Turbo Transfer (Bio-Rad ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were heated at 95 °C for 5 min and loaded on 12% Mini-PROTEAN TGX precast protein gel (#4561043, Bio-Rad). The gel was run using 1x Tris/Glycine running buffer at 100 V for 90 min ...
-
bioRxiv - Microbiology 2023Quote: ... and treated with or without heat denaturation (96°C, 8 min) and ran on a TGX stain-free precast gel (Bio-Rad) for 38 min at 200 V ...
-
bioRxiv - Microbiology 2022Quote: ... Reactions were 10 μL and conducted in 384-well plates using an annealing temperature of 60°C on a CFX384 Touch Real-Time PCR Detection System (Bio-Rad).
-
bioRxiv - Physiology 2022Quote: ... Lysates were diluted with 4X Laemmli buffer containing beta-mercaptoethanol and boiled for 10 minutes at 95°C and subjected to SDS-polyacrylamide gel electrophoresis 4-20% (Criterion TGX Stain-Free Protein Gel, Bio-Rad) gels ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were heated 10 min at 95°C before loading 10 µl aliquots onto precast mini- PROTEAN TGX gels (Bio-Rad). The polyacrylamide concentration was 7.5% for GFP-DamX constructs ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were heated for 10 min at 95°C before loading 10 µl onto a 10% polyacrylamide precast mini-PROTEAN TGX gel (Bio-Rad). After electrophoresis the gel was washed twice with distilled water ...
-
bioRxiv - Molecular Biology 2022Quote: ... The plate was then heat sealed with pierceable foil using a PX1 PCR plate sealer 5s at 180°C (Bio-Rad), and PCR amplification was carried out in a T100 thermal cycler (Bio-Rad) ...
-
bioRxiv - Neuroscience 2022Quote: ... Samples were heated at 95°C for 10 min and loaded into a 4-15% gradient Tris-glycine gel (Biorad 4561084) immersed in Tris-glycine-SDS running buffer (Biorad 1610772) ...
-
bioRxiv - Physiology 2022Quote: ... followed by a final melting curve analysis from 70°C to 95°C with 0.2°C increment for each step using the CFX96 Real-Time PCR System and the Precision Melt Analysis software (Bio-Rad). For HMA analysis ...
-
bioRxiv - Plant Biology 2022Quote: ... The dicing reactions were performed at 37 °C for 30 min and stopped by adding 1 volume TBE-Urea sample buffer (Bio-Rad), heating at 95 °C for 10 min and quickly chilling on ice for 2 min ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were grown at 30°C for 3-6 days and images captured using a Chemidoc XRS+ imager (BioRad, Hercules, CA). All images were evenly adjusted in Photoshop (Adobe Systems Incorporated ...
-
β-catenin programs a tissue-specific epigenetic vulnerability in aggressive adrenocortical carcinomabioRxiv - Cancer Biology 2022Quote: Samples were prepared by boiling at 95°C for 6 minutes in lysis buffer supplemented with 4x Laemmli Sample Buffer (Bio-Rad), with 355 mM 2-mercaptoethanol freshly added according to manufacturer’s instructions ...
-
bioRxiv - Plant Biology 2024Quote: ... and 500nmol of each primer and annealing temperature of 59 °C on a CFX Connect Real-Time PCR Detection System (Bio-Rad) at 95 °C for two minutes followed by forty cycles of 95 °C for 15 seconds and 59 °C for 30 seconds ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were centrifuged for 30 min at 20,000 x g at 4 °C and protein concentrations of the supernatants were measured with standard Bradford assay (Bio-Rad Laboratories). 25 or 50 µg of proteins were diluted in Laemmli buffer 3× (188 mM Tris-HCl ...
-
bioRxiv - Microbiology 2024Quote: ... The samples were then treated according to the instruction of the beads and the protein complexes were then eluted by incubating at 99°C for 5 minutes with Laemmli Sample Buffer (1610747, Bio-Rad).
-
bioRxiv - Microbiology 2024Quote: ... 30-50 μg of total protein was boiled at 99°C for 5 minutes with the addition of Laemmli Sample Buffer (1610747, Bio-Rad) containing 1% 2-Mercaptoethanol in a total volume of 60-80 μl ...
-
bioRxiv - Microbiology 2024Quote: ... Supernatants were mixed with reducing SDS sample buffer and incubated for 5 min at 95°C prior to fractionation by SDS-PAGE analysis on 4–15 % Mini-PROTEAN TGX Stain-Free Protein Gels (Bio-Rad). Western Blot analysis was performed as described previously (15).
-
bioRxiv - Molecular Biology 2024Quote: ... Target amplification and real-time signal collection were carried out at 66°C for 60 mins on CFX96 Touch Real-Time PCR Detection System from Bio-Rad.
-
bioRxiv - Molecular Biology 2023Quote: ... The proteins were eluted by heating the beads (95°C for 5 min.) in 70 μL of BME 4X Laemmli buffer (Biorad #1610747). Prior to loading on a 7.5% TGX SDS-PAGE gel (Biorad #5671024) ...
-
bioRxiv - Microbiology 2024Quote: ... 20µg of protein samples were heated in 1X Laemmli buffer at 95°C for 5 min and loaded on pre-cast 4-20% SDS-polyacrylamide electrophoresis gel (Bio-Rad). For the RIP experiment ...
-
bioRxiv - Neuroscience 2024Quote: ... incubated overnight with primary antibody in 5% milk in TBST at 4 °C and subsequently washed in TBST and incubated for 1 hours at room temperature with HRP-linked secondary antibody (Bio-Rad) in 5% milk in TBST ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured at 95°C for 10 min and run on 4-20% Criterion TGX Precast Midi Protein gels (Bio-Rad). Resolved protein was transferred to nitrocellulose using Trans-Blot turbo transfer packs ...
-
bioRxiv - Neuroscience 2024Quote: ... via wet transfer at 30V for 1 hour at 4 °C in 10% Methanol Tris/Glycine buffer using a Criterion™ Blotter (BioRad). Blots were all blocked for 1 hour at room temperature using Intercept (TBS ...
-
bioRxiv - Molecular Biology 2024Quote: ... 0.5% of total input and 15% of total IP fraction were resolved on 10% SDS-PAGE gels and wet transferred onto a 0.45 µm nitrocellulose membrane for 2 h at 80 V and 4°C (Bio-Rad, Germany). The membrane was blocked for 1 h in 5% BSA in PBST (PBS + 0.2% Tween20) ...
-
bioRxiv - Molecular Biology 2024Quote: ... followed by a 10 min final extension at 72°C before resolving on a 5% polyacrylamide tris-borate-EDTA (TBE) gel (Bio-Rad) at 35 V ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were boiled at 100°C for 5 min after addition of 50 µl of 4x Laemmli sample buffer (BioRad, 1610747) containing 2-Mercaptoethanol (BME) ...
-
bioRxiv - Molecular Biology 2023Quote: ... containing 2-Mercaptoethanol at 95°C for 10 min and separated by electrophoresis in Any kDTM Mini-PROTEAN TGX precast gel (Bio-Rad) and transferred to a PVDF membrane (Bio-Rad) ...
-
bioRxiv - Cancer Biology 2024Quote: ... The insoluble material was separated at 13,000 rpm for 30 minutes at 4 °C and total protein concentration was measured on supernatants using Bradford reagent (Bio-Rad). Protein extracts were denatured with NuPAGE®LDS (Invitrogen ...
-
bioRxiv - Biochemistry 2024Quote: Samples were incubated at 95°C for 10 minutes and loaded onto SDS-polyacrylamide gels (Mini-Protean TGX gels 4-20%, Bio-Rad). Following gel electrophoresis ...
-
bioRxiv - Immunology 2024Quote: ... the proteins were transferred to a polyvinylidene difluoride membrane (110V, 1h, 4°C) using a Mini Trans-Blot cell apparatus (Bio-Rad). Non-specific binding sites were blocked using PBS/Tween 20 (0.05% Tween 20 ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were boiled for 10 minutes at 95°C before separation on a gradient of 4-20% SDS-PAGE gels (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for either semi-dry or wet transfer (Bio-Rad) ...
-
bioRxiv - Biochemistry 2024Quote: ... Images were collected following 5 days of incubation at 30 °C with a Bio-Rad Chemidoc MP Imaging System (Bio-Rad) and analyzed using the ImageJ software (50).
-
bioRxiv - Biochemistry 2024Quote: ... The plates were incubated overnight at 37°C and were imaged the next day using a ChemiDoc Imaging System (Bio-Rad).
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were cleared by centrifugation (10 min at 14,000 x g, 4°C) and quantified by Bradford (Bio-Rad, cat#5000205). All samples were then boiled for 5 min in Laemmli sample buffer ...
-
bioRxiv - Cancer Biology 2024Quote: ... The samples were then transferred to a PVDF membrane at 400mA for 2 hours at 4°C in 1x Tris/Glycine buffer (1610771, Bio-Rad). Membranes were then blocked in casein blocking buffer (PI37528 ...