Labshake search
Citations for Bio-Rad :
1001 - 1050 of 1305 citations for Recombinant Human Angiopoietin 2 His tagged since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... Blots were washed (3 × 5min TBS-T and 2 × 5 min TBS) before being imaged on the ChemiDoc MP Imaging System (Biorad). Subsequently ...
-
bioRxiv - Zoology 2022Quote: ... and folded by heating to 95°C for 2 min and slowly cooling down at 0.1 °C per second using a thermocycler (Bio-Rad). DsRNA concentrations were adjusted to 3 or 14 μg / μl using SpeedVac Concentrator (Thermo Scientific ...
-
bioRxiv - Microbiology 2022Quote: ... The resulting cDNA was diluted 1:10 and 2 µL was used for qPCR amplification of SARS-CoV-2 spike using iTaq Universal SYBR Green Supermix according to the manufacturer’s protocol (Bio-Rad). Copy number was calculated in reference to a standard curve of known copy number (102 – 107 copies spike) ...
-
bioRxiv - Molecular Biology 2022Quote: ... The combined solution was incubated at room temperature for 1 hr and then mixed with BioBeads SM-2 resin (BioRad) overnight to remove the detergents ...
-
bioRxiv - Synthetic Biology 2022Quote: ... the mixture was transferred to ice-cold electroporation cuvettes with a 2 mm gap (Bio-Rad Laboratories GmbH, Germany, #1652086). Electroporation was performed using the MicroPulser Electroporator (Bio-Rad Laboratories GmbH ...
-
bioRxiv - Synthetic Biology 2023Quote: ... and incubated for 24 h in a thermal gradient using a DNA Engine Tetrad 2 Peltier Thermal Cycler (Bio-Rad) with the lid set to 50°C ...
-
bioRxiv - Microbiology 2022Quote: ... competent cells were mixed with 500 ng of DNA in electroporation cuvettes (2 mm gap) and the reactions were electroporated (2.5 kV) using a MicroPulser electroporator (Bio-Rad). Electroporated cells were recovered in 1 mL LB (unless otherwise stated ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein lysates in Laemmli buffer were separated by electrophoresis on 12% SDS-PAGE gels and transferred for 2 hours at 4°C on to a PVDF membrane (BioRad). After blocking for an hour in 5% dry milk ...
-
bioRxiv - Biophysics 2022Quote: Detergent removal and generation of proteoliposomes was achieved using polystyrene beads (Bio-Beads in SM-2 Adsorbent Media, BioRad, Inc.). The protocol was adapted and refined from 20 ...
-
bioRxiv - Neuroscience 2023Quote: ... membranes were subsequently blocked for 2 h at room temperature with 5% non-fat milk (Bio-Rad, Hercules, CA, USA) or 5% bovine serum albumin (BSA ...
-
bioRxiv - Systems Biology 2023Quote: ... and total protein abundance was normalized to 2 μg using the Detergentcompatible Protein Assay (Biorad, Hercules, CA, USA, Cat. # 5000111). 2 μg α-RelA antibody (Cell Signaling ...
-
bioRxiv - Microbiology 2023Quote: ... 1.0 mg purified plasmid DNA was added to 0.2 ml aliquot of the above-prepared fusobacterial cells in a pre-cooled corvette (0.1 cm electrode gap, Bio-Rad) and left on ice for 10 minutes ...
-
bioRxiv - Genomics 2023Quote: ... Gels were run in 1X tris-acetate SDS running buffer for 2 hr and transferred to a 0.45 μm PVDF membrane using the Turbo Trans-Blot transfer system (Bio-Rad) for 30 min ...
-
bioRxiv - Microbiology 2023Quote: ... 1.0 µg purified plasmid DNA was added to 0.2 ml aliquot of the above-prepared fusobacterial cells in a pre-cooled corvette (0.1 cm electrode gap, Bio-Rad) and left on ice for 10 minutes ...
-
bioRxiv - Microbiology 2023Quote: ... 10 min), centrifuged (1,000 x g, 2 min) and loaded on 10% or 4–20% SDS-PAGE gel (Bio-Rad). Following electrophoresis (60 min ...
-
bioRxiv - Cell Biology 2023Quote: ... then the pellet was resuspended in 212 µL of Laemmli sample buffer with 2-mercaptoethanol added (Bio-Rad, Hercules, CA). To neutralize the residual TCA ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... the nitrocellulose membrane was incubated with ECL reagent SignalFire for 1-2 min and imaged using a ChemiDoc (Bio-Rad).
-
bioRxiv - Cancer Biology 2022Quote: ... 95°C for 2 min followed by 40 cycles of 95°C for 15 sec and 60°C for 1 min (BioRad). The following primers from Integrated DNA Technologies (IDT ...
-
bioRxiv - Biochemistry 2022Quote: ... The PVDF membranes were then incubated with HRP-coupled secondary antibodies (1:10,000, CST) for 2 h at 25°C and visualized by ChemiDoc XRS (Bio-Rad) instrument.
-
bioRxiv - Cancer Biology 2023Quote: ... qPCR duplicates were carried out using 2 µL of diluted cDNA (1 into 100) in a 20 µL-reaction using Sso Fast EvaGreen reagent (BioRad) following supplier’s instructions on a StepOne Plus™ Real-Time PCR system (Applied BioSystems) ...
-
bioRxiv - Genomics 2022Quote: ... Proteins were transferred to a 0.2 µm or a low-fluorescence 0.45 µm polyvinylidene difluoride (PVDF) transfer membrane using a Trans-Blot Turbo (Bio-Rad). Following antibody incubation ...
-
bioRxiv - Genomics 2023Quote: ... Gels were run in 1X tris-acetate SDS running buffer for 2 hour and transferred to a 0.45 μm PVDF membrane using the Turbo Trans-Blot transfer system (Bio-Rad) for 30 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... cDNA was generated from ∼2 ng of total RNA from each sample using iScript Reverse Transcription Supermix for qRT-PCR (170-8891; BioRad) according to manufacturer’s protocols ...
-
bioRxiv - Cell Biology 2023Quote: Whole-cell lysates for immunoblotting were prepared by dissolving cells in Laemmli Sample Buffer containing 5% 2-mercaptoethanol (Bio-Rad). Protein samples were loaded on 4-15% polyacrylamide gels (BioRad ...
-
bioRxiv - Microbiology 2023Quote: ... 390 μl of cells were mixed with 10 μg of in vitro transcribed RNA and added to a 2 mm electroporation cuvette (BioRad). BHK-21 cells were electroporated with 1 pulse at 1.2 kV ...
-
bioRxiv - Immunology 2023Quote: ... Bio-Plex SARS-CoV-2 Wuhan-1 strain RBD and N coupled beads (Bio-Rad, Cat Nos. 12015406 and 12014773), and Bio-Plex Pro Human IgA detection antibody (Bio-Rad ...
-
bioRxiv - Microbiology 2023Quote: ... DD-HA-BFD2Δeif1.2 were subjected to electrophoresis using 10% polyacrylamide SDS-PAGE gels and transferred onto 0.45-µm nitrocellulose membranes (Bio-Rad) with wet/tank transfer system (Bio-Rad ...
-
bioRxiv - Microbiology 2023Quote: ... Relative expression was determined using the 2−ΔΔCT method129 as part of the CFX Maestro for Mac 1.0 software package (Bio-Rad).
-
bioRxiv - Microbiology 2023Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Duplicates of samples and plasmid standards were amplified by using the following protocol ...
-
bioRxiv - Cell Biology 2023Quote: ... Cell pellets were resuspended by addition of ice-cold PBS supplemented with 2% FBS and counted using a TC-20 cell counter (BioRad). 2.5-5x105 cells were harvested ...
-
bioRxiv - Microbiology 2023Quote: ... The mixture was allowed to stand at room temperature in the dark for 30 min before the detergent was removed by successive addition of BioBeads SM-2 (BioRad). Nanodiscs were concentrated using Vivaspin® 500 centrifugal filters (10 kDa MWCO PES membrane).
-
bioRxiv - Immunology 2024Quote: ... mixed with 25 μl 1.5 mM CaCl2 and 42 μl ddH2O using 2 mm gap cuvettes with 3.5 msec/500 volt in BIORAD Gene Pulser Xcell Electroporation System (BioRad, USA). Transfected cells were immediately transferred into 5 mL prewarmed medium in 25 cm2 flasks and left to recover overnight at 26 °C ...
-
bioRxiv - Neuroscience 2024Quote: ... The samples (2 μg) were loaded onto a 15% SDS-PAGE gel and transferred to PVDF membranes (0.2 μm, Bio-Rad). After blocking with 5% BSA in TBST at room temperature for 1 hour ...
-
bioRxiv - Microbiology 2023Quote: ... PCR products were run on 2% TBE agarose gel and post-stained with ViSafe Red Gel Stain (Vivantis Technologies) and visualised using GelDoc (BioRad). The relative intensity of the bands was quantified using ImageJ ...
-
bioRxiv - Microbiology 2023Quote: ... cells and plasmids in 10% glycerol were first heat-shocked at 56°C for 2 min followed by immediate electroporation in 0.1-cm cuvette (Bio-Rad) using electroporation program of 2.5 kV and time constant of 2.3-2.5 ms on the Bio-Rad Micropulser ...
-
bioRxiv - Microbiology 2024Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Samples and plasmid standards were amplified using the following protocol ...
-
bioRxiv - Biophysics 2023Quote: ... and yeast cell growth was monitored by measuring the OD600 at 2 h increments in a microplate reader (Benchmark Plus, BioRad). The remainder of the 10 ml cultures was used to assess Pgp expression by Western blot analysis of microsomal membrane preparations using the monoclonal C219 anti-Pgp antibody.
-
bioRxiv - Cell Biology 2020Quote: ... 2 mM L-glutamine and counted in the presence of Trypan Blue using the TC20™ Automated Cell counter (Bio-Rad) (24h floating cell count) ...
-
bioRxiv - Cell Biology 2020Quote: Cells cultured in each well of a 6-well plate at 80% confluency were washed three times with PBS and harvested/resuspended in 150–200 μl of 2× Laemmli buffer (Bio-Rad). The cell lysate was boiled for 10 min and loaded onto an SDS gel ...
-
bioRxiv - Cell Biology 2020Quote: ... Relative mRNA levels of the indicated genes were calculated by the 2-DDCT method (Bulletin 5279, Real-Time PCR Applications Guide, Bio-Rad), using GAPDH expression as endogenous control ...
-
bioRxiv - Genetics 2021Quote: ... qPCR was carried out using BioMaster HS-qPCR SYBR Blue (2×) reagent kit (Biolabmix; https://biolabmix.ru/en/) and CFX96™ Real-Time PCR Detection System (Bio-Rad). We used the following thermal cycling conditions ...
-
bioRxiv - Systems Biology 2022Quote: ... Drugs were then added to the plates and protein was harvested after 2 hours using the Bio-Plex Pro Cell Signaling Reagent Kit (BioRad 171304006M) according to the manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were heated to 50°C for 2-3 min before addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexing vigorously for 5 s before pipetting in plug mould (Bio-Rad 1703713 ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were then diluted 1:10 and 2 µL of diluted cDNA were used for RT-qPCR along with 5 µL of iTaq universal SYBR mix (Bio-Rad), 1.5 µL of primers (1.5 µM mix of forward and reverse ...
-
bioRxiv - Molecular Biology 2021Quote: ... was used with the primers listed in Supplementary Information Table 2 and samples were run on CFX96 Real-Time PCR Detection System (Bio-rad).
-
bioRxiv - Immunology 2022Quote: ... and by linear regression in log10 copies/ml with a standard curve realized from a SARS-CoV-2 positive nasopharyngeal sample quantified by Droplet-Digital PCR (Bio-Rad). IC50s were analyzed by nonlinear regression using a four-parameter dosage-response variable slope model with the GraphPad Prism 8.0.2 software (GraphPad Software ...
-
bioRxiv - Microbiology 2020Quote: ... concentration of total aerobic GNB and of MDR-GNB were determined by plating serial dilutions (pure, 10−2, 10−4) of initial faeces or EA sample onto Drigalski agar (Bio-Rad) with or without 1mg/L cefotaxime ...
-
bioRxiv - Immunology 2021Quote: ... Lysates were finally adjusted to a final concentration of 2 µg/µl with 4X Laemmli buffer (Bio-Rad, Hercules, CA, USA) containing 10% β-Mercaptoethanol.
-
bioRxiv - Microbiology 2019Quote: ... 250 µl packed cells were combined with 250 µl of 1 × Cytomix in a 2 mm transfection cuvette (Bio-Rad Laboratories). The precipitated and resuspended DNA was added to the cell suspension in the cuvette ...
-
bioRxiv - Biochemistry 2019Quote: ... MenD mutants were generated using the pYUB28b-menD construct and oligonucleotide primers (Supplementary Table 2, Integrated DNA Technologies) with iProofTM high-fidelity DNA polymerase (Bio-Rad). The PCR products were then treated with DpnI and ligated using T4 DNA ligase (Roche) ...