Labshake search
Citations for Bio-Rad :
51 - 100 of 5928 citations for 6 hydroxy 4 6 dihydrofuro 3 2 c pyran 2 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... Lysates were centrifuged for 15 min at 10,000 x g at 4 °C and supernatants were collected for protein quantification using the Quick start Bradford protein assay kit 2 (Biorad). Samples were mixed with Laemmli buffer (Biorad ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein lysates in Laemmli buffer were separated by electrophoresis on 12% SDS-PAGE gels and transferred for 2 hours at 4°C on to a PVDF membrane (BioRad). After blocking for an hour in 5% dry milk ...
-
bioRxiv - Neuroscience 2022Quote: ... 40 μg of samples 3 were mixed with 2× laemmli buffer + 5% 2-mercaptoethanol (BioRad Laboratories, Hercules, CA). Samples were then briefly vortexed and centrifuged ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were heated to 50°C for 2-3 min before addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexing vigorously for 5 s before pipetting in plug mould (Bio-Rad 1703713 ...
-
bioRxiv - Genomics 2021Quote: The nuclei solution were adjusted to 43°C for 3 min and melted 2% agarose from CHEF Genomic DNA Plug Kits (Bio-Rad) was added to reach a 0.82% agarose plug concentration ...
-
bioRxiv - Microbiology 2023Quote: ... 2% formaldehyde gel and separated at 125-150V at 4°C for 1-2 h and then transferred to a Zeta-Probe GT membrane (Bio-Rad) via capillary action overnight (Streit et al. ...
-
bioRxiv - Molecular Biology 2024Quote: ... 0.5% of total input and 15% of total IP fraction were resolved on 10% SDS-PAGE gels and wet transferred onto a 0.45 µm nitrocellulose membrane for 2 h at 80 V and 4°C (Bio-Rad, Germany). The membrane was blocked for 1 h in 5% BSA in PBST (PBS + 0.2% Tween20) ...
-
bioRxiv - Cancer Biology 2024Quote: ... The samples were then transferred to a PVDF membrane at 400mA for 2 hours at 4°C in 1x Tris/Glycine buffer (1610771, Bio-Rad). Membranes were then blocked in casein blocking buffer (PI37528 ...
-
bioRxiv - Molecular Biology 2022Quote: ... 2 μL of DNAse (1:3 in DNase buffer) (Biorad, 10042051) was added to 700 ng of RNA sample ...
-
bioRxiv - Molecular Biology 2024Quote: ... 2 µL of DNAse (1:3 in DNase buffer) (Biorad, 10042051) was added to 700 ng of RNA sample ...
-
bioRxiv - Cancer Biology 2023Quote: ... Samples were heated to 50°C for 2 to 3 min before the addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexed vigorously for 5 sec before pipetting in plug mould (Bio-Rad 1703713) ...
-
bioRxiv - Microbiology 2021Quote: ... pulse times 6-36 s at 6 V/cm on a Bio-Rad CHEF MAPPER apparatus (Bio-Rad Laboratories). Restriction profiles were analyzed using the BioNumerics version 7.10 finger-printing software.
-
bioRxiv - Biochemistry 2022Quote: ... pH 7.6 with HCl) for one hour and then divided for blotting on the basis of the prestained protein ladder (Bio-Rad, 1610373). Primary antibodies (see antibody table for vendor and dilutions ...
-
bioRxiv - Plant Biology 2021Quote: ... At least 4-6 technical replicate RT-qPCR reactions were performed using iTAQ with ROX and SYBR (BioRad), and 20μL reactions were prepared as per the manufacturer recommendations ...
-
bioRxiv - Neuroscience 2019Quote: ... and samples were then transferred at 100 V at 4°C onto an activated 2 um polyvinylidene difluoride (PVDF) membrane (Bio-Rad 1620177), blocked with 3% BSA in 0.2% Tween-20 (Sigma P9614 ...
-
bioRxiv - Biophysics 2023Quote: ... The mixture was incubated for 1-2 h at 4 °C and incubated overnight with pre-washed bio-beads (Bio-Rad Laboratories) at 4 °C ...
-
bioRxiv - Biophysics 2022Quote: ... The protein-dye conjugate was purified by 3 rounds of size exclusion chromatography (Bio-Spin 6 column, BioRad, CA) and then aliquoted in 5 μL portions and stored at -80C until required.
-
bioRxiv - Cell Biology 2021Quote: ... 2 ml bed volume (0.8 × 4 cm) empty polypropylene column (BioRad) fitted with a two-way stopcock up to the fill line ...
-
bioRxiv - Molecular Biology 2020Quote: ... Proteins were separated at 175 V for 3-4 hours at 4°C and then transferred to nitrocellulose membrane (BioRad) by using a Criterion blot cell (BioRad ...
-
bioRxiv - Cell Biology 2021Quote: ... Membranes were blocked with 6% milk (BioRad 1706404) in Tris buffered saline (TBS ...
-
bioRxiv - Biophysics 2020Quote: ... or Micro Bio-Spin 6 columns (Bio-Rad)) according to the manufacturers’ protocols ...
-
bioRxiv - Developmental Biology 2020Quote: ... The extracts were separated on 6% polyacrylamide (Biorad) gel and transferred onto nitrocellulose membranes in Tris/glycine transfer buffer ...
-
bioRxiv - Biochemistry 2021Quote: ... 6 mL gravity flow columns were from Biorad, Germany.
-
bioRxiv - Biochemistry 2019Quote: ... was transferred to a new tube with 50 μL 2 M HCl and boiled for 2 hours at 95°C in a C1000 thermocycler (Bio-Rad) to hydrolyze all glucans to glucose ...
-
bioRxiv - Neuroscience 2019Quote: ... 72°C for 2’ in a T100™ Thermal Cycler (Bio-Rad) followed by long-term storage at −20°C ...
-
bioRxiv - Cell Biology 2022Quote: ... in 4°C for 2-4 hours and the beads were then isolated and eluted through a Bio-Spin® Chromatography Column (Bio-Rad, #7326008) with elution buffer (5 0mM Tris-HCl pH 8 ...
-
bioRxiv - Molecular Biology 2019Quote: ... The lysate/bead mixtures were incubated at 4°C on a rotating platform for 2 hrs and subsequently poured into Poly-Prep® Chromatography Columns (Bio-Rad #7311550). Unbound fractions were collected through the columns and stored at −20°C ...
-
Gatekeeper helix activates Golgi SM protein Sly1 and directly mediates close-range vesicle tetheringbioRxiv - Cell Biology 2020Quote: ... The resulting mixtures were dialyzed (20 kDa cutoff) for ∼18h at 4°C in the dark against 250 volumes of FB160M1 containing 2 g BioBeads SM2 (Bio-Rad, Hercules, CA) per 2 mL of RPL mixture ...
-
bioRxiv - Physiology 2024Quote: ... 6 μg of protein from each sample was loaded into a 4-20% Mini-PROTEAN® TGX gel (BioRad) and proteins were separated by size using electrophoresis ...
-
bioRxiv - Biochemistry 2021Quote: ... 5 μg of lysate was heat denatured for 3 minutes at 95°C for 3 minutes and resolved on a pre-cast 4-15 % SDS-PAGE gels (Bio-Rad) at 200V for 45 minutes in 1X running buffer (25mM Tris pH 8.3 ...
-
bioRxiv - Microbiology 2020Quote: Surface Plasmon Resonance (SPR) binding experiments were carried out on a ProteOn XPR36 6×6 channels protein interaction array system (Bio-Rad). Proteins BRD4-BD1 an BRD4-BD2 were diluted to a final concentration of 50μg/ml in HEPES buffer 25 mM pH 7.0 and immobilized to a GLM chip using amine coupling ...
-
bioRxiv - Biophysics 2022Quote: ... 1 mg of post-thrombin digested claudin-4 in DDM was treated with 4 mg of amphipol (1:4 w/w) for 2 hours before removing detergent via addition of 400 mg SM-2 biobeads (Bio-Rad). Excess cCpE was added to each claudin-4 sample at a molar ratio of 1:1.5 ...
-
bioRxiv - Microbiology 2021Quote: ... for 60 min at 37°C followed by purification on a Micro-Bio Spin P-6 Gel Column (Bio-Rad). 1 pmol of 5’-end-radiolabeled primer was used for each extension reaction ...
-
bioRxiv - Cell Biology 2021Quote: Cells lysates were separated on 4-2% gradient SDS-polyacrylamide gels (Biorad), transferred to polyvinylidene fluoride (Millipore ...
-
bioRxiv - Bioengineering 2022Quote: ... pH 8.3 at 100 V for 2 h at 2-8 °C using PowerPac Basic setup (Bio-Rad Laboratories Inc., Hercules, CA). Post-electrophoresis ...
-
bioRxiv - Neuroscience 2023Quote: ... on an Opticon 2 from MJ Research with Opticon Monitor 3 software (BioRad). Reactions were set up manually using an 8-channel pipette (30-300μL ...
-
bioRxiv - Systems Biology 2021Quote: ... and 6 μl for slow growing mutants with lower OD600) on Stain-Free gels (4-20%, CAT # 4568096, Bio-Rad, Tris/Glycine SDS Buffer (CAT # 161-0732 ...
-
bioRxiv - Neuroscience 2022Quote: ... The embryoid media was aspirated and 15 to 20 embryoid bodies were plated per well in 6-well plates and cultured in 3 mL hematopoetic medium (2 mM GlutaMax, 1x Anti-Anti, 55 mM 2-mercaptoethanol (BioRad; Cat. No. 1610710), 100 ng/mL M-CSF ...
-
bioRxiv - Microbiology 2020Quote: ... pH6.9 using a micro biospin 6 column (Bio-Rad). The FOS sample was diluted to ∼500 µM with 0.5 M ammonium acetate ...
-
bioRxiv - Microbiology 2020Quote: ... and Bio-Plex Manager software (v.6, Bio-Rad). The data were expressed as median fluorescence intensity (MFI ...
-
β-catenin programs a tissue-specific epigenetic vulnerability in aggressive adrenocortical carcinomabioRxiv - Cancer Biology 2022Quote: Samples were prepared by boiling at 95°C for 6 minutes in lysis buffer supplemented with 4x Laemmli Sample Buffer (Bio-Rad), with 355 mM 2-mercaptoethanol freshly added according to manufacturer’s instructions ...
-
bioRxiv - Neuroscience 2023Quote: ... SARS-CoV-2 RT-qPCR reactions (10 µL) using the iTaq Universal Probe One-Step Kit (BioRad) and SARS-CoV-2 N1 primers/probe mix (Stock# 10006713 ...
-
bioRxiv - Neuroscience 2022Quote: ... anti-Ly-6B.2 (1:100, clone 7/4, BioRad, raised in rat) and anti-Nur77 (NR4A1 ...
-
bioRxiv - Genetics 2020Quote: ... and ligated to MseI and EcoRI adaptors (Supplementary Table 4) at 37° C for 2 h in a T100™ Thermal cycler (Bio-Rad Laboratories, Hercules, CA). Success of the digestion/ligation reaction was confirmed on 1.5% of agarose gel electrophoresis ...
-
bioRxiv - Molecular Biology 2020Quote: ... IB analysis was performed after 6-7.5% SDS-PAGE or 4-20% Mini-PROTEAN TGX Precast Protein Gels (BioRad, Hercules, CA), with overnight incubation with a 1:1000 dilution of primary antibody and followed by a 1:5000 dilution of horseradish peroxidase-conjugated anti-rabbit or anti-mouse antibody (Jackson ImmunoResearch ...
-
bioRxiv - Microbiology 2019Quote: ... 4 µl of the diluted DNA sample was added to 6 µl of a mixture containing SYBR Green Supermix (Bio-Rad) and gene-specific primers (0·4 µM total ...
-
bioRxiv - Biophysics 2021Quote: ... Detergents were removed by adding 2-3 batches of Bio-beads SM2 (Bio-Rad) with constant rotation for overnight ...
-
bioRxiv - Cell Biology 2021Quote: ... supplemented with 2 M 2-Mercaptoethanol (Bio-Rad), and boiled for 3 min ...
-
bioRxiv - Microbiology 2024Quote: ... The assays were incubated for 2 hours at 37 °C in a thermocycler (Biorad). Samples were then filtered through 3 kDa filter plates and derivatized with 4,5-dimethoxy-1,2-phenylenediamine hydrochloride (DMB) ...
-
bioRxiv - Microbiology 2019Quote: ... Cell debris was cleared by centrifugation at 21000 g for 5 min at 4°C and supernatant was mixed with one-third volume 4X Laemmli Sample Buffer (Bio-Rad). For lysozyme lysis ...