Labshake search
Citations for Bio-Rad :
901 - 950 of 5928 citations for 6 hydroxy 4 6 dihydrofuro 3 2 c pyran 2 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... Detergent was removed with four rounds of incubation with SM-2 beads (Bio-Rad) at 80mg beads per 1 mL of liposome suspension (2 hrs at 23°C twice ...
-
bioRxiv - Biophysics 2020Quote: ... Triton X-100 was then removed by adding BioBeads SM-2 absorbent beads (BioRad) at a Bio-Beads/Triton X-100 ratio of 10 (wt/wt ...
-
bioRxiv - Biochemistry 2020Quote: ... 2 to 15 µl of samples were dotted onto a nitrocellulose membrane (Bio-RAD). We used a concentration of 6E10 antibody of 1:2000 (Biolegend® ...
-
bioRxiv - Bioengineering 2022Quote: ... using the primers listed in Supplementary Table 2 using SsoFast EvaGreen Supermix (Bio-Rad). The expression of the respective gene of interest was normalized to the samples’ respective GAPDH expression using the ΔCt or ΔΔCt method as indicated in the figures ...
-
bioRxiv - Biochemistry 2021Quote: ... pH 7.5 and loaded onto a 2 ml CHT2-I hydroxyapatite column (Bio-Rad) equilibrated in 20 mM HEPES ...
-
bioRxiv - Microbiology 2021Quote: ... cell lysates and immunoprecipitates on beads were resuspended in 2× Laemmli buffer (Bio-Rad) and subjected to SDS-PAGE and western blot analysis.
-
bioRxiv - Bioengineering 2021Quote: ... 2% milk solution was prepared by dissolving nonfat dry milk powder (Bio-rad, UK) in distilled water and this solution was mixed with equal volume of 2% ...
-
bioRxiv - Neuroscience 2019Quote: ... Bound proteins were eluted in 2 × Laemmli sample buffer (Bio-Rad, Cat# 161-0737) containing 5% 2-mercaptoethanol by heating at 95 °C for 5 minutes ...
-
bioRxiv - Cancer Biology 2019Quote: ... sections were blocked with 2% milk powder (blotting grade; Bio-Rad Laboratories, Hercules, USA) in PBS for 30 minutes ...
-
bioRxiv - Genomics 2021Quote: These reactions were undertaken on a DNA Engine Tetrad 2 Thermal Cycler (Bio-Rad), with MyTaq HS DNA polymerase ...
-
bioRxiv - Plant Biology 2022Quote: ... Extracted proteins were further purified using the BioRad ReadyPrep 2-D Cleanup Kit (BioRad), approximately 60-70 μg of protein was loaded onto 7 cm pH 3-10 NL and pH 4-7 IPG strips (BioRad ...
-
bioRxiv - Plant Biology 2022Quote: ... Luminescence intensities mm-2 were evaluated using the Image Lab software (BioRad, Feldkirchen, Germany).
-
bioRxiv - Microbiology 2022Quote: ... The cells:DNA mix was transferred to a 2 mm electroporation cuvette (Bio-Rad #1652082) and electroporated at 2500 kV ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gel was dried for 2 h on a Gel Dryer 583 (Bio-Rad) and visualized after appropriate exposure on a Phosphorimager (FLA-3000 Series ...
-
bioRxiv - Immunology 2022Quote: ... and then blotted for 2 hours onto 0.45 μm supported nitrocellulose membranes (Bio-Rad). Membranes were blocked for one hour using 5% Bovine Serum Albumin (BSA ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... membranes were incubated for 2 minutes with Clarity Western ECL Blotting Substrate (Bio-Rad) and proteins visualized on ChemiDoc (Bio-Rad) ...
-
bioRxiv - Cancer Biology 2023Quote: ... then 2 ul of normalized RNA were mixed with iTaq Universal SYBR (Bio-Rad) and primers for c-Myc (F ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... and sheep polyclonal against Trans-Golgi network integral membrane protein 2 (TGN46; Bio-Rad Laboratories ...
-
bioRxiv - Cell Biology 2023Quote: ... and re-suspended in 2x Laemmli sample buffer containing 2% SDS (Biorad, catalog #: 1610737). Protein concentration was measured by MicroBCA assay (Thermo Scientific ...
-
bioRxiv - Biophysics 2023Quote: ... Afterwards the samples were incubated with Bio-Beads SM-2 sorbent (Bio-Rad Laboratories) overnight on the rolling bank at 4°C to remove the detergent (Rigaud et al ...
-
bioRxiv - Biochemistry 2023Quote: ... detergent was removed by overnight incubation with activated Bio-Beads SM-2 (Bio-Rad). For purification of PhuR-containing nanodiscs ...
-
bioRxiv - Immunology 2023Quote: ... 2× ddPCR supermix for probes (no dUTP) final concentration 1× (Bio-Rad Laboratories, USA), a 20× target primer/FAM-labeled probe mix ...
-
bioRxiv - Plant Biology 2023Quote: ... Each reaction contained 5 μL of 2 x iQ SYBR Green supermix (Bio-Rad), 2 μL of diluted cDNA (10 times dilution for shoots and roots ...
-
bioRxiv - Microbiology 2024Quote: ... the beads and total lysate were resuspended in 2× Laemmli sample buffer (Bio-Rad) supplemented with 5% 2-mercaptoethanol (Sigma-Aldrich ...
-
bioRxiv - Plant Biology 2024Quote: ... This mixture was transferred to a 2 mm ice cold electroporation cuvette (Bio-Rad). Transformation of WT P ...
-
bioRxiv - Biophysics 2023Quote: ... The purity of 12mer arrays was confirmed using APAGE (2% acrylamide, 1% Biorad agarose) gels stained with SyBr Gold (Life Technologies) ...
-
bioRxiv - Cell Biology 2024Quote: ... Proteins bound to Dynabeads were eluted with 2 x Laemmli sample buffer (Bio-Rad) and subjected to immunoblot analysis ...
-
bioRxiv - Cell Biology 2020Quote: ... Beckton Dickinson) overnight at 4°C and visualized using the Bio-Rad ChemiDoc MP Imaging System (Bio-Rad Laboratories).
-
bioRxiv - Molecular Biology 2020Quote: ... at 100 V for 1 hr in 4°C pre-chilled 1X Tris-Glycine buffer (Bio-Rad 161-0734). Membranes were blocked for 1 hr at room temperature in blocking buffer (PBS (Gibco 14190-144) ...
-
bioRxiv - Developmental Biology 2020Quote: ... the membrane was blocked overnight at 4°C using 5% non-fat dry milk (Bio-Rad, catalog 170-6404) in Tris-buffered saline pH 7.3 ...
-
bioRxiv - Neuroscience 2019Quote: ... Transfer was done at 100mA for 22 hrs at 4 °C and the nitrocellulose membrane (# 162-0094, Bio-Rad) was blocked for 1 hour with 5% BSA and 0.05% NaN 3 in 1X TBST (1X TBS ...
-
bioRxiv - Biochemistry 2020Quote: ... The reconstitution sample was nutated for 1 h at 4°C before addition of 0.2 g/mL SM2-BioBeads (BioRad), and the reconstitution sample was further nutated overnight at 4°C before removal of the biobeads ...
-
bioRxiv - Bioengineering 2021Quote: ... and probed overnight at 4°C with IRDye 680 Streptavidin (LICOR) diluted 1:3000 in 1:1 TBST:Blocking Buffer (BioRad). Membranes were imaged using an Azure Biosystems c600 ...
-
bioRxiv - Microbiology 2020Quote: ... The cell lysates were subjected for centrifugation at 13,000 rpm for 30 min at 4°C and the supernatant were incubated in sample loading buffer 2x (Biorad) containing 10% β-mercaptoethanol for 5 min at 98 °C ...
-
bioRxiv - Microbiology 2020Quote: ... 7.5 mg of proteins were diluted in ChIP buffer supplemented with 0.01% SDS and precleared 1 h at 4 °C with 50 μl of protein A agarose beads (BioRad) and 100 μg BSA ...
-
bioRxiv - Cell Biology 2021Quote: ... heated for 10 min at 95°C and loaded on Mini Protean TGX precast gel 4-12% (Bio-Rad). For the blot ...
-
bioRxiv - Bioengineering 2022Quote: ... droplets were left at 4 °C for at least 30 minutes and read using the QX200 Droplet Reader (BioRad). ddPCR data was analyzed using QuantaSoft™ software ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were then centrifuged at 12,000 rpm at 4°C for 20min and total protein extracts were boiled in Laemmli sample buffer (BioRad), separated by SDS-PAGE under reducing conditions and transferred to PVDF membranes (Millipore) ...
-
bioRxiv - Microbiology 2020Quote: ... in 0.5×TBE buffer at 4 to 7 °C for 260 h using a CHEF Mapper System (Bio-Rad). Switching time was 1,200 to 4,800 s at 1.5 V/cm with an included angle of 120° ...
-
bioRxiv - Biochemistry 2019Quote: ... Samples were run on 14% native polyacrylamide gels in TAE buffer at 4 ° C using a MiniproteanIII system (BioRad) set at 140 V ...
-
bioRxiv - Bioengineering 2021Quote: ... Membranes were stained overnight at 4°C with a 1:1000 diluted mouse anti-his primary antibody (MCA1396, RRID:AB_322084, Bio-Rad) and then for 1 hour at room temperature with a 1:4000 diluted rabbit anti-mouse HRP secondary antibody (SouthernBiotech Cat# 6170-05 ...
-
bioRxiv - Genetics 2019Quote: ... at 4° C with 100 V for 1 hour in 1 x Tris/Glycine Buffer (Bio-Rad, Cat#1610734) and 20% methanol (Fisher Scientific ...
-
bioRxiv - Neuroscience 2020Quote: ... Lysates were cleared of debris by centrifugation at 15,000 x g for 15 min at 4°C and then normalized for protein content using Bradford assay (BioRad). Normalized protein lysates were fractionated by 10 % SDS/PAGE and transferred onto a PVDF membrane (GE Healthcare Life Sciences ...
-
bioRxiv - Plant Biology 2022Quote: ... 4 °C) and the supernatant was taken up and the protein concentration was determined using the Bradford assay (Biorad).
-
bioRxiv - Molecular Biology 2023Quote: ... at 95°C for 10 min and separated by electrophoresis in a 4–12% SDS–PAGE gel (Bio-Rad) and transferred to a PVDF membrane (Bio-Rad) ...
-
bioRxiv - Physiology 2023Quote: ... and transferred at 4°C for 16 hrs at 30 V onto 0.45 µm supported nitrocellulose membrane (Bio-rad). Membranes were blocked in EveryBlot Blocking Buffer (Bio-rad ...
-
bioRxiv - Cell Biology 2023Quote: ... boiled 10 min at 95°C and run in 4% - 15% Mini-Protean TGX Stain-Free gels (Bio-Rad) in non-reducing conditions (no β-mercaptoethanol nor DTT) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Total proteins were centrifuged (15000 rpm at 4°C) and determined using protein assay dye reagent (Bio-Rad, 500006). Subsequently ...
-
bioRxiv - Neuroscience 2023Quote: ... were centrifuged at 20,000 x g for 25 min at 4⁰C and supernatants were assayed for total protein (Bradford assay, BioRad). Aliquots of WCL (30 µg total protein ...
-
bioRxiv - Neuroscience 2024Quote: ... by boiling for 10 min at 98°C before loading onto a 4-20% gel (Bio-Rad, Hercules, CA), then transferred to PVDF 0.22 m membrane (Bio-Rad ...