Labshake search
Citations for Bio-Rad :
801 - 850 of 1875 citations for 2 Trimethylsilyl Furo 3 2 B Pyridine 6 Carbaldehyde since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Zoology 2022Quote: ... and folded by heating to 95°C for 2 min and slowly cooling down at 0.1 °C per second using a thermocycler (Bio-Rad). DsRNA concentrations were adjusted to 3 or 14 μg / μl using SpeedVac Concentrator (Thermo Scientific ...
-
bioRxiv - Microbiology 2022Quote: ... The resulting cDNA was diluted 1:10 and 2 µL was used for qPCR amplification of SARS-CoV-2 spike using iTaq Universal SYBR Green Supermix according to the manufacturer’s protocol (Bio-Rad). Copy number was calculated in reference to a standard curve of known copy number (102 – 107 copies spike) ...
-
bioRxiv - Molecular Biology 2022Quote: ... The combined solution was incubated at room temperature for 1 hr and then mixed with BioBeads SM-2 resin (BioRad) overnight to remove the detergents ...
-
bioRxiv - Synthetic Biology 2022Quote: ... the mixture was transferred to ice-cold electroporation cuvettes with a 2 mm gap (Bio-Rad Laboratories GmbH, Germany, #1652086). Electroporation was performed using the MicroPulser Electroporator (Bio-Rad Laboratories GmbH ...
-
bioRxiv - Synthetic Biology 2023Quote: ... and incubated for 24 h in a thermal gradient using a DNA Engine Tetrad 2 Peltier Thermal Cycler (Bio-Rad) with the lid set to 50°C ...
-
bioRxiv - Microbiology 2022Quote: ... competent cells were mixed with 500 ng of DNA in electroporation cuvettes (2 mm gap) and the reactions were electroporated (2.5 kV) using a MicroPulser electroporator (Bio-Rad). Electroporated cells were recovered in 1 mL LB (unless otherwise stated ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein lysates in Laemmli buffer were separated by electrophoresis on 12% SDS-PAGE gels and transferred for 2 hours at 4°C on to a PVDF membrane (BioRad). After blocking for an hour in 5% dry milk ...
-
bioRxiv - Immunology 2024Quote: ... mixed with 25 μl 1.5 mM CaCl2 and 42 μl ddH2O using 2 mm gap cuvettes with 3.5 msec/500 volt in BIORAD Gene Pulser Xcell Electroporation System (BioRad, USA). Transfected cells were immediately transferred into 5 mL prewarmed medium in 25 cm2 flasks and left to recover overnight at 26 °C ...
-
bioRxiv - Microbiology 2023Quote: ... cells and plasmids in 10% glycerol were first heat-shocked at 56°C for 2 min followed by immediate electroporation in 0.1-cm cuvette (Bio-Rad) using electroporation program of 2.5 kV and time constant of 2.3-2.5 ms on the Bio-Rad Micropulser ...
-
bioRxiv - Microbiology 2024Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Samples and plasmid standards were amplified using the following protocol ...
-
bioRxiv - Biophysics 2023Quote: ... and yeast cell growth was monitored by measuring the OD600 at 2 h increments in a microplate reader (Benchmark Plus, BioRad). The remainder of the 10 ml cultures was used to assess Pgp expression by Western blot analysis of microsomal membrane preparations using the monoclonal C219 anti-Pgp antibody.
-
bioRxiv - Microbiology 2023Quote: ... PCR products were run on 2% TBE agarose gel and post-stained with ViSafe Red Gel Stain (Vivantis Technologies) and visualised using GelDoc (BioRad). The relative intensity of the bands was quantified using ImageJ ...
-
bioRxiv - Genomics 2023Quote: ... Gels were run in 1X tris-acetate SDS running buffer for 2 hr and transferred to a 0.45 μm PVDF membrane using the Turbo Trans-Blot transfer system (Bio-Rad) for 30 min ...
-
bioRxiv - Microbiology 2023Quote: ... 1.0 µg purified plasmid DNA was added to 0.2 ml aliquot of the above-prepared fusobacterial cells in a pre-cooled corvette (0.1 cm electrode gap, Bio-Rad) and left on ice for 10 minutes ...
-
bioRxiv - Biophysics 2022Quote: Detergent removal and generation of proteoliposomes was achieved using polystyrene beads (Bio-Beads in SM-2 Adsorbent Media, BioRad, Inc.). The protocol was adapted and refined from 20 ...
-
bioRxiv - Neuroscience 2023Quote: ... membranes were subsequently blocked for 2 h at room temperature with 5% non-fat milk (Bio-Rad, Hercules, CA, USA) or 5% bovine serum albumin (BSA ...
-
bioRxiv - Systems Biology 2023Quote: ... and total protein abundance was normalized to 2 μg using the Detergentcompatible Protein Assay (Biorad, Hercules, CA, USA, Cat. # 5000111). 2 μg α-RelA antibody (Cell Signaling ...
-
bioRxiv - Immunology 2023Quote: ... Blocked membranes were incubated with HuCAL anti-bovine Mincle CRD antibodies (2.5 µg mL-1) before incubation with secondary goat-anti-human IgG F(ab’)2: HRP (STAR126P, Bio-Rad) antibody ...
-
bioRxiv - Microbiology 2023Quote: ... 1.0 mg purified plasmid DNA was added to 0.2 ml aliquot of the above-prepared fusobacterial cells in a pre-cooled corvette (0.1 cm electrode gap, Bio-Rad) and left on ice for 10 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... 95°C for 2 min followed by 40 cycles of 95°C for 15 sec and 60°C for 1 min (BioRad). The following primers from Integrated DNA Technologies (IDT ...
-
bioRxiv - Biochemistry 2022Quote: ... The PVDF membranes were then incubated with HRP-coupled secondary antibodies (1:10,000, CST) for 2 h at 25°C and visualized by ChemiDoc XRS (Bio-Rad) instrument.
-
bioRxiv - Cancer Biology 2023Quote: ... qPCR duplicates were carried out using 2 µL of diluted cDNA (1 into 100) in a 20 µL-reaction using Sso Fast EvaGreen reagent (BioRad) following supplier’s instructions on a StepOne Plus™ Real-Time PCR system (Applied BioSystems) ...
-
bioRxiv - Genomics 2022Quote: ... Proteins were transferred to a 0.2 µm or a low-fluorescence 0.45 µm polyvinylidene difluoride (PVDF) transfer membrane using a Trans-Blot Turbo (Bio-Rad). Following antibody incubation ...
-
bioRxiv - Genomics 2023Quote: ... Gels were run in 1X tris-acetate SDS running buffer for 2 hour and transferred to a 0.45 μm PVDF membrane using the Turbo Trans-Blot transfer system (Bio-Rad) for 30 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... cDNA was generated from ∼2 ng of total RNA from each sample using iScript Reverse Transcription Supermix for qRT-PCR (170-8891; BioRad) according to manufacturer’s protocols ...
-
bioRxiv - Cell Biology 2023Quote: Whole-cell lysates for immunoblotting were prepared by dissolving cells in Laemmli Sample Buffer containing 5% 2-mercaptoethanol (Bio-Rad). Protein samples were loaded on 4-15% polyacrylamide gels (BioRad ...
-
bioRxiv - Microbiology 2023Quote: ... 390 μl of cells were mixed with 10 μg of in vitro transcribed RNA and added to a 2 mm electroporation cuvette (BioRad). BHK-21 cells were electroporated with 1 pulse at 1.2 kV ...
-
bioRxiv - Immunology 2023Quote: ... Bio-Plex SARS-CoV-2 Wuhan-1 strain RBD and N coupled beads (Bio-Rad, Cat Nos. 12015406 and 12014773), and Bio-Plex Pro Human IgA detection antibody (Bio-Rad ...
-
bioRxiv - Microbiology 2023Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Duplicates of samples and plasmid standards were amplified by using the following protocol ...
-
bioRxiv - Microbiology 2023Quote: ... 10 min), centrifuged (1,000 x g, 2 min) and loaded on 10% or 4–20% SDS-PAGE gel (Bio-Rad). Following electrophoresis (60 min ...
-
bioRxiv - Cell Biology 2023Quote: ... then the pellet was resuspended in 212 µL of Laemmli sample buffer with 2-mercaptoethanol added (Bio-Rad, Hercules, CA). To neutralize the residual TCA ...
-
bioRxiv - Microbiology 2023Quote: ... Relative expression was determined using the 2−ΔΔCT method129 as part of the CFX Maestro for Mac 1.0 software package (Bio-Rad).
-
bioRxiv - Microbiology 2023Quote: ... The mixture was allowed to stand at room temperature in the dark for 30 min before the detergent was removed by successive addition of BioBeads SM-2 (BioRad). Nanodiscs were concentrated using Vivaspin® 500 centrifugal filters (10 kDa MWCO PES membrane).
-
bioRxiv - Cell Biology 2023Quote: ... Cell pellets were resuspended by addition of ice-cold PBS supplemented with 2% FBS and counted using a TC-20 cell counter (BioRad). 2.5-5x105 cells were harvested ...
-
bioRxiv - Cell Biology 2024Quote: ... 500μL of sample was dialyzed (20 kDa cutoff) in 250 mL Buffer A with 0.5 g Biobeads SM-2 (Bio-Rad) for 16-18 hours at 4°C ...
-
bioRxiv - Microbiology 2024Quote: ... The ddPCR reaction mixture consisted of 12.5 µl of a 2× ddPCR Supermix for Probes no dUTP (1863024; Bio-Rad), 1.25 µl of each 20× primer-probe mix (Table 2) ...
-
bioRxiv - Immunology 2024Quote: ... incubated in Radiance ECL HRP substrate (Azure Biosystems) for 2 min and visualized using the chemiluminescent setting on a ChemiDoc XRS+ (Biorad).
-
bioRxiv - Immunology 2024Quote: ... and dialyzed overnight at 4 °C into 4 L of Experimental Buffer (25 mM Tris, 100 mM NaCl, pH 7.4) with 2 g/L Chelex 100 resin (Bio-Rad) to chelate residual transition metal ions ...
-
bioRxiv - Microbiology 2024Quote: ... qPCR was performed using 2 µL of genomic DNA in SsoAdvancedTM Universal SYBR® Green Supermix (Bio-Rad, 172-5271) and primers for a 529-base pair repetitive element of T ...
-
bioRxiv - Molecular Biology 2024Quote: ... Gene-specific cDNA synthesis was carried out with 2 µg of mtRNA using the iScript Select cDNA Synthesis Kit (BioRad) and oligo 2278 (see Supplementary Table ST2) ...
-
bioRxiv - Immunology 2024Quote: ... and incubated in Radiance ECL HRP substrate (Azure Biosystems) for 2 min before visualization using the chemiluminescent setting on the ChemiDoc XRS+ (Biorad).
-
bioRxiv - Microbiology 2024Quote: ... The PCR reaction mixture (25 μL total) consisted of 12.5 μL of 2× SYBR Green PCR Master Mix (Bio-Rad), 300 nmol each of forward and reverse primers ...
-
bioRxiv - Microbiology 2024Quote: ... The was filtered through a 0.45 μm filter and His-MSI-2 was purified with HisTrapTM FF column (Cytiva) using the Econo Gradient Pump (BIORAD) according to the manufacturer’s protocol and overnight dialysis ...
-
bioRxiv - Microbiology 2024Quote: ... DD-HA-BFD2Δeif1.2 were subjected to electrophoresis using 10% polyacrylamide SDS-PAGE gels and transferred onto 0.45-µm nitrocellulose membranes (Bio-Rad) with wet/tank transfer system (Bio-Rad ...
-
bioRxiv - Molecular Biology 2024Quote: ... diluted to a concentration of 1/5,000 in Can Get Signal Solution 2 (TOYOBO) or HRP-conjugated goat anti-rabbit IgG (Bio-Rad) diluted to a concentration of 1/3,000 in 5% skim milk at room temperature for 1 hour ...
-
bioRxiv - Microbiology 2024Quote: ... and gene specific primers were used to amplify cDNA and products were resolved using a 2% agarose gel and imaged via the ChemiDoc Touch Imaging system (BioRad). Primer sequences for both qPCR and PCR can be found in Table 4 and Table 5 ...
-
bioRxiv - Microbiology 2024Quote: ... qPCR was performed using 2 µL of genomic DNA in SsoAdvancedTM Universal SYBR® Green Supermix (Bio-Rad, 172-5271) and primers for a 529-base pair repetitive element of T ...
-
bioRxiv - Neuroscience 2024Quote: ... Proteins were transferred on nitrocellulose membrane at 100V for 2 h using the Mini trans-blot cell (Bio-Rad, #1703930). Membranes were blocked with 5% skim milk diluted in PBST (PBS + 0.1% Tween 20 ...
-
bioRxiv - Biochemistry 2024Quote: ... Size Exclusion chromatography was performed using a column packed with Bio-Gel P-2 fine resins (Bio-Rad, Hercules, CA). HPLC analysis of compounds was performed on a Shimadzu LC-20A with a Waters XBridge BEH ...
-
bioRxiv - Cell Biology 2024Quote: ... Digested DNA was purified and 2–5 μg of DNA was run on a 1% PFGE agarose gel (Bio-Rad) in 0.5 × TBE buffer using the CHEF-DRII system (Bio-Rad ...