Labshake search
Citations for Grace Bio-Labs :
1 - 50 of 358 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2024Quote: ... tubules were oriented in PBST between a microscope slide and a coverslip separated by a 0.12 mm thick SecureSeal™ Imaging Spacers (Grace Bio Labs). Images were obtained using spinning disk confocal scanning unit Yokogawa CSU W1 Dual T2 with 100x/1.4 oil immersion objective ...
-
bioRxiv - Bioengineering 2024Quote: ... the coverslip coated in a 3D hydrogel was briefly dried and attached to a commercial black polystyrene 96-well plate with an adhesive backing (Grace Bio-labs, USA). The resulting well was filled with distilled water ...
-
bioRxiv - Microbiology 2024Quote: ... on which a CultureWell silicone gasket (Grace Bio-labs) was then placed ...
-
bioRxiv - Cancer Biology 2024Quote: ... and spotted onto nitrocellulose-coated slides (Grace Bio-Labs) in triplicate using an Aushon 2470 array platform (Aushon Biosystems) ...
-
bioRxiv - Bioengineering 2024Quote: ... the cell-laden constructs were infused with 20 μL of a 2 m mL-1 collagen gel and fixed into a 0.7x0.7 cm square chamber designed from Grace Bio-labs SecureSeal adhesive sheet ...
-
bioRxiv - Plant Biology 2024Quote: ... All subsequent steps were performed in a 55-µL SecureSeal chamber (621505, Grace Bio-Labs, Bend, OR). Myc-tagged mCherry-PIF5 was detected using rabbit anti-Myc polyclonal antibodies (2272 ...
-
bioRxiv - Developmental Biology 2024Quote: ... Embryos were mounted in PBS and placed between two coverslips (1.5 thickness) using SecureSeal spacers (Grace Bio-labs). Antibodies used are listed in Supplementary Table 6.
-
bioRxiv - Molecular Biology 2024Quote: ... Imaging was performed with the cells in a SecureSeal hybridisation chamber (SecureSeal; Grace Bio-Labs, Bend) and coverslips coated with 6μl of poly(l-lysine)-graft-poly(ethylene glycol ...
-
bioRxiv - Neuroscience 2024Quote: ... with an adhesive base and two 1.5 mm ports (with attached tubing connectors, Grace Bio-Labs press fit tubing connectors ...
-
bioRxiv - Molecular Biology 2024Quote: ... and fixed onto a microscope slide using the Press-To-Seal Silicone Isolator (Grace Bio-Labs JTR20R-0.5). Slides were imaged on a Nikon Eclipse Ti-2 widefield microscope with a Spectra X LED light engine (Lumencor) ...
-
bioRxiv - Molecular Biology 2024Quote: Microfluidic chambers were assembled as follows: 4.5 mm wide piece of double-sided SecureSeal Adhesive Sheet (Grace Bio-Labs) was placed parallel on each side of holes drilled 10 mm apart in a glass microscope slide ...
-
bioRxiv - Neuroscience 2024Quote: ... followed by one wash in PBS for 90 min and then mounted on glass slides within SecureSeal Imaging Spacers (Grace Bio-Labs, Bend, Oregon, USA) containing SlowFade Gold Antifade mounting medium (Life Technologies ...
-
bioRxiv - Neuroscience 2024Quote: ... A perfusion chamber of 20 mm diameter and 2.5 mm height (Grace Bio-Labs CoverWell ...
-
bioRxiv - Molecular Biology 2024Quote: ... CultureWell gaskets (3 mm DIA x 1 mm Depth, Grace Bio-Labs, Bend, OR, USA) were assembled on the clean coverslips ...
-
bioRxiv - Molecular Biology 2024Quote: ... Cell suspensions were then prepared for imaging by putting 15 uL of cell solution onto a microscope slide with an image spacer (Grace Bio-Labs) and a #1 size coverslip (Fisher Scientific).
-
bioRxiv - Neuroscience 2024Quote: ... Harrick Plasma) for 30 minutes before a trimmed gasket was placed on top (CultureWell™ Reusable Gasket, 6mm diameter, Grace Bio-Labs, 103280). Poly-L-Lysine (0.01 % w/v PLL ...
-
bioRxiv - Microbiology 2024Quote: ... Clear silicon gaskets (Grace Bio-Labs, Bend, Oregon) were placed in the wells of Lab-Tek chambered cover glass with No ...
-
bioRxiv - Cancer Biology 2024Quote: ... with a 40 pin (185 μm) configuration was used to spot samples and control lysates onto nitrocellulose-coated slides (Grace Bio-labs) using an array format of 960 lysates/slide (2880 spots/slide) ...
-
bioRxiv - Bioengineering 2024Quote: ... and assembled into flow chambers with isopropanol/Milli-Q H2O-rinsed and nitrogen-dried silicone gaskets (6 mm × 1 mm, GBL103280, Grace Bio-Labs) as outlined (Young et al. ...
-
bioRxiv - Cancer Biology 2024Quote: ... with a 40 pin (185 µm) configuration was used to spot samples and control lysates onto nitrocellulose-coated slides (Grace Bio-labs, Bend, OR) using an array format of 960 lysates/slide (2880 spots/slide) ...
-
bioRxiv - Cell Biology 2024Quote: ... and imaging chambers were constructed by affixing coverslips via pieces of 0.12 mm SA-S-Secure Seal double-sided tape (Grace Bio-labs, Bend, OR) flanking the long axis of wells ...
-
bioRxiv - Cell Biology 2024Quote: Phase separation properties of PGL-3 constructs under various conditions were imaged within chambers created by attaching cover glass to glass slide with imaging spacer between them (Grace Bio-Labs SecureSeal, Sigma Aldrich). 4 μL of solution was placed at the center of the imaging chamber ...
-
bioRxiv - Developmental Biology 2024Quote: ... The SecureSeal hybridization chamber (GRACE BIO-LABS, 621501) was then mounted to cover samples on the slide ...
-
bioRxiv - Genomics 2024Quote: Custom Silicone Isolator (Grace Bio-Labs, Bend ...
-
bioRxiv - Microbiology 2024Quote: ... 24 x 60 mm microscope coverslips with Culture Well Reusable Gaskets (GRACE BIO-LABS, Bend, Oregon). Strep-GlnA1 and untagged GlnK1 were prepared as described above ...
-
bioRxiv - Immunology 2024Quote: ... Images were acquired using the ArrayCAM imaging system from Grace Bio-Labs (Bend, OR). Spot and background intensities were measured using an annotated grid (.gal ...
-
bioRxiv - Biophysics 2024Quote: ... The samples were pipetted into an imaging chamber formed by sandwiching a silicon isolator (Grace Bio-Labs) between passivated coverslips and microscope slides ...
-
bioRxiv - Biophysics 2024Quote: ... Silicon gaskets (Grace Bio-Labs) to hold the sample drops were cleaned in the same procedure immediately prior to measurement ...
-
bioRxiv - Biophysics 2024Quote: ... CultureWell gaskets (Grace Biolabs) were placed on the coverslips as container well for MP measurements.
-
bioRxiv - Biophysics 2024Quote: ... Chambers were assembled by first punching a hole through a 0.5 mm silicone sheet (JTR-S-0.5, Grace Biolabs, USA), which was then placed over an 18 x 18 mm2 coverslip ...
-
bioRxiv - Biophysics 2024Quote: ... built up by a PEG-coated cover slide at the bottom and a silicone spacer (Grace Bio-Labs, USA) with a height of 0.9 mm and a diameter of 4.5 mm ...
-
bioRxiv - Biophysics 2024Quote: ... Samples were loaded on a PEG-coated cover slide and enclosed by an imaging spacer (Grace Bio-Labs, USA).
-
bioRxiv - Biophysics 2024Quote: ... CultureWell™ reusable gaskets (3 mm diameter x 1 mm depth, Grace Bio-Labs) were used to assemble sample chambers ...
-
bioRxiv - Cell Biology 2024Quote: ... Anterior halves with attached wing discs were transferred onto a slide with imaging spacers (0.12mm depth, SecureSeal, GRACE Bio-Labs) into a drop of Live Imaging Medium complemented with Hoechst 33342 (4µg/mL,ThermoScientific) ...
-
bioRxiv - Biochemistry 2024Quote: ... the indicated concentrations of purified 6His-tagged BRD4 were spotted onto blank nitrocellulose-coated glass slides (Grace Bio-Labs PATH protein microarray slides ...
-
Bio-orthogonal Glycan Imaging of Culture Cells and Whole Animal C. elegans with Expansion MicroscopybioRxiv - Bioengineering 2024Quote: ... prepared with a 2 mm diameter silicon spacer well (Grace Biolabs) that acted as the gelation chamber in downstream ExM processing.
-
bioRxiv - Bioengineering 2024Quote: ... Whole tissues were placed in incubation chambers (Grace Bio-Labs, cat. no. 645501) and mounted with ProLong Diamond antifade mountant (Invitrogen ...
-
bioRxiv - Bioengineering 2024Quote: ... The base was then sealed to a self-adhesive bottomless well plate from Grace Bio-Labs. 96-well plates with a high density fractal pattern and TPE bottoms were fabricated in a similar method using a master mold designed for a 96-well blueprint.
-
bioRxiv - Developmental Biology 2024Quote: ... in 0.1× MMR on a glass slide attached to a silicone isolator (1.2 mm, Grace Biolabs) or on a glass-bottom dish (#1 ...
-
bioRxiv - Genomics 2024Quote: ... The sections were then rinsed with 2X saline sodium citrate (SSC) for 5 min and an Adhesive SecureSeal Hybridization Chamber (Grace Bio-Labs) was placed over the tissue.
-
bioRxiv - Biophysics 2024Quote: ... The 4 µL mixture was placed on the microscope slide with chambered coverglass (3 mm diameter, 1 mm depth, Grace Bio-Labs) and covered with another slide to prevent evaporation ...
-
bioRxiv - Biophysics 2024Quote: ... and slides (Grace BioLabs, Bend, OR, USA) were coated with PlusOne Repel Silane ES (GE Healthcare ...
-
bioRxiv - Biophysics 2024Quote: ... CultureWell silicone gaskets (Grace Bio-Labs, Bend, OR) were placed onto the freshly cleaned coverslips providing six independent sample chambers ...
-
bioRxiv - Bioengineering 2024Quote: ... The coverslips were plasma treated for 1 min and sealed into a custom hybriwell chamber (Grace bio-labs). The flow cells have a volume of 10 µl with a rectangular center area of 6 mm × 8 mm with conical taper regions at the short sides (15 deg half angle ...
-
bioRxiv - Cell Biology 2024Quote: ... Imaging wells consisted of 5 mm diameter holes in 0.8 mm thick silicone gaskets (Grace Bio-Labs). Gaskets were placed directly onto no.1.5 glass coverslips (VWR International) ...
-
bioRxiv - Bioengineering 2024Quote: ... 64-well ProPlate® multi-well chambers (Grace Bio-Labs) were used to enclose the fabricated microarray ...
-
bioRxiv - Biochemistry 2024Quote: ... we used double-adhesive imaging spacers (Grace Bio-labs, 654002) attached to the 27 mm glass wide bottoms of 35 mm dishes (Thermo Fisher Scientific ...
-
bioRxiv - Biochemistry 2024Quote: ... iSCAT measurements were carried out using CultureWell gaskets (Cat. #GBL103250, Grace Biolabs) affixed to #1.5 coverslips (Cat ...
-
bioRxiv - Bioengineering 2024Quote: ... The assembled array was secured by self-cut Delrin snap clips (Grace Bio Labs) to avoid leakage or potential contamination ...
-
bioRxiv - Bioengineering 2024Quote: ... a 64-well ProPlate microarray system (Grace Bio Labs) was placed gently on the photoetched coverslip ...