Labshake search
Citations for Takara Bio :
351 - 400 of 556 citations for 6 PHENETHYLCARBAMOYL CYCLOHEX 3 ENECARBOXYLIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2022Quote: ... and integrinβ7+ MCs from both ears of NT mice (n = 5) and MC903-treated mice (n = 6) were collected into CDS sorting solution (Takara Bio Inc, Shiga, Japan) using 96 well plate ...
-
bioRxiv - Immunology 2023Quote: ... The 6-His tagged recombinant proteins were purified from the supernatant by gravity-fed through TALON® Metal Affinity Resin (Takara Bio, Shiga, Japan). Following a wash step with PBS (pH 8) ...
-
bioRxiv - Cancer Biology 2023Quote: Retroviral supernatant was collected two and three days after transfection of GP2-293T cells and concentrated onto wells of a 6 well plates coated with Retronectin (Takara Bio, 5 ug/ml) by spinning at 2500g for 90 minutes at 32° C ...
-
bioRxiv - Cell Biology 2020Quote: ... cells were single-cell sorted into 96-well low-bind PCR-plates [Eppendorf] containing 3 μl of lysis buffer (0.5 units/μl RNase inhibitor [Takara] ...
-
bioRxiv - Developmental Biology 2021Quote: ... was incubated with antibodies at 4°C for one hour: 3 µl (0.5 µg/µl) c-Myc monoclonal antibody (Cat. No. 631206, TaKaRa), or 1 µl (1.1 µg/µl ...
-
bioRxiv - Developmental Biology 2020Quote: ... 5’-RACE and 3’-RACE reactions were performed with the Smart RACE cDNA Amplification Kit (Clontech, Palo Alto, CA) according to the manufacturer’s instructions ...
-
bioRxiv - Biochemistry 2020Quote: ... The final supernatant was supplemented with NaCl to 150 mM and incubated with 3 mL His60 resin (Takara Biosciences) for 30 min ...
-
bioRxiv - Cancer Biology 2020Quote: Libraries were prepared using 1ng of purified cDNA according to the ICELL8® 3’ DE instruction manual (Takara Bio) using the Nextera Primer P5 (ICELL8® 3’ DE Kit ...
-
bioRxiv - Microbiology 2021Quote: The LTR promoter of the HIV-1 laboratory strain pNL4-3 was cloned into the pTA-Luc backbone (Clontech) and is henceforth referred to as pTA-Luc-NL4-3 ...
-
bioRxiv - Immunology 2022Quote: The sequence of anti-IFNγ was cloned from XMG1.2 hybridoma (ATCC) using SMARTer RACE 5’/3’ kit (Takara Bio). The 6xHis tagged anti-Dsg ...
-
bioRxiv - Bioengineering 2022Quote: About 130 ml of clarified cell suspension was combined with 3 mL of TALON® resin (Takara Bio 635503) previously equilibrated in lysis buffer and rocked at 4°C for 1 h ...
-
bioRxiv - Molecular Biology 2021Quote: The s2m sequence or control scrambled sequence of s2m (s2m_scr) was inserted into the 3’ UTR of GFP in H6P plasmid using In-Fusion Cloning kit (TaKaRa) and verified by sequencing ...
-
bioRxiv - Microbiology 2021Quote: PDGFRβ-targeted sgRNA (5’-CCGGTGAGAGCCACCCTGACAGTG-3’) was cloned into the pGuide-it-ZsGreen1 vector (Takara, Biomedical Technology, Beijing, China). This plasmid could simultaneously express Cas9 ...
-
bioRxiv - Plant Biology 2019Quote: ... SmCOP1 and SmHY5 respectively into the yeast strain AH109 as instructions for Matchmaker GAL4 Two-Hybrid Systems 3 (Clontech). Yeast Two-Hybrid analysis were performed following Yeast Protocols Handbook (Clontech) ...
-
bioRxiv - Microbiology 2020Quote: ... 1) were annealed to a complementary 20-nt primer containing a 5’-fluorescein label (5’FAM-GUCAUUCUCCUAAGAAGCUA-3’, Takara). To perform the primer extension assay ...
-
bioRxiv - Biophysics 2019Quote: ... and the products were further purified in 3% agarose-TBE gels and subsequently reisolated using gel-purification kits (Clontech).
-
bioRxiv - Evolutionary Biology 2021Quote: ... The template plasmid for the mCherry-targeting ssDNA was constructed with 1.5 kb long 5’ and 3’ arms amplified from the C57BL/6N genome using PrimeSTAR GXL DNA Polymerase (TaKaRa), the upstream genome sequence of the stop codon of Rtl5 and downstream of the predictive cut site by Cas9 ...
-
bioRxiv - Microbiology 2020Quote: 5’-RACE analysis was performed using SMARTer RACE 5’/3’ kit and In-Fusion HD Cloning kit according to the manufacturer’s instructions with slight modifications (Clontech). 5’-RACE ready cDNA was synthesized from purified mRNA (TG ...
-
bioRxiv - Immunology 2021Quote: ... Cells were harvested after 3 d and AAV6 was purified with a filtration-based kit (Takara AAVpro Purification Kit) per the manufacturer’s protocol ...
-
bioRxiv - Microbiology 2021Quote: ... The supernatant with the soluble His6-UppH was loaded on to a 3 ml TALON Metal Affinity Resin (Clontech) equilibrated in binding buffer (50 mM Na2HPO4 ...
-
bioRxiv - Cell Biology 2022Quote: ... then imaged after overnight expression and ∼3 hour incubation with 500 nM A/C heterodimerizer linker drug (Takara, 635055) or 100% ethanol ...
-
bioRxiv - Molecular Biology 2022Quote: ... Tagged proteins were bound to 6 (=3 mL bed volume) or 3 mL (=1.5 mL bed volume) pre-equilibrated Talon SuperFlow Metal Affinity Resin from TaKaRa (LarA wt ...
-
bioRxiv - Immunology 2022Quote: ... Recombinant adenovirus vaccines were produced using the Adeno-X™ Adenoviral System 3 according to the manufacturer’s manual (Takara Korea Biomedical Inc. ...
-
bioRxiv - Microbiology 2022Quote: ... and the 3’ flanking region) and the linearized pHIS906 were fused using the In-Fusion enzyme (TAKARA, Shiga, Japan) to create the pHIS3-AWP1 plasmid ...
-
bioRxiv - Cancer Biology 2023Quote: ... Reverse transcription of mRNA was performed using 3-5 μg RNA with RNA to cDNA EcoDry Premix (Takara, #639549). For real-time PCR analysis ...
-
Retrovirus-derived RTL9 plays an important role in innate antifungal immunity in the eutherian brainbioRxiv - Evolutionary Biology 2023Quote: ... The plasmid for mCherry insertion was constructed with 1.5 kb long 5’ and 3’ arms amplified from the C57BL/6N genome using PrimeSTAR GXL DNA Polymerase (TaKaRa). The 5’ arm is the genomic sequence upstream of the stop codon of Rtl9 and the 3’ arm is downstream of the predictive Cas9 cut site ...
-
bioRxiv - Plant Biology 2023Quote: ... and SD4 (-Trp-Leu-His-Ade) media at 30℃ for 3–5 d according to the manufacturer’s manual (Clontech).
-
bioRxiv - Cell Biology 2024Quote: ... filtered through a 0.45 µm polyethersulfone filter and used directly or concentrated 3-fold with Lenti-X Concentrator (Clontech).
-
bioRxiv - Neuroscience 2024Quote: ... AAV was purified 3–5 days after transfection using AAVpro Purification Kit Midi or Maxi (Takara Bio, Shiga, Japan). The viral concentration was measured by qRT-PCR.
-
A randomized multiplex CRISPRi-Seq approach for the identification of critical combinations of genesbioRxiv - Genetics 2023Quote: ... to OD600 0.2–0.3 with 2–3 mL fresh AYE +Fe +Cys containing 40 ng/mL anhydrous tetracycline (aTC, Clontech 631310). On the third day ...
-
bioRxiv - Genomics 2024Quote: ... Supernatant containing viral particles was harvested after 2 and 3 days and concentrated 100x using Lenti-X concentrator (Takara) following manufacturers instructions.
-
bioRxiv - Systems Biology 2021Quote: ... We prepared ligation-free ribosome profiling and total RNA-seq libraries from the clarified polysome lysates treated for 6 hours following the instructions provided with their respective kits (smarter-seq smRNA-seq kit, Takara-Clontech; NEBnext Ultra-Directional II) augmented with our previously-published ligation-free ribosome profiling protocol42 ...
-
bioRxiv - Cell Biology 2020Quote: ... These ligated pools were then amplified using AdR_PCR oligonucleotides as primer (5′-GGTCGCGGCCGAGGATC-3′) (IDT) and Advantage cDNA polymerase mix (Clontech, 639105). Amplicons were electrophoresed in 1% agarose gel to check for amplification and the size distribution of the library and then column purified (Qiagen ...
-
bioRxiv - Cell Biology 2020Quote: ... TTAGCTAGCCTTCTGATGTGATAGTTTATC TTCTG-3’ were used to amplify the 3xFLAG-BBS10 from the BBS10 ORF plasmid using CloneAmp HiFi PCR premix (Takara), which was further cloned into the CD520A-GFP plasmid via XbaI and Nhe I restriction sites ...
-
bioRxiv - Developmental Biology 2021Quote: ... Specific forward and reverse primers (Suppl Table 3) were designed using the In-Fusion Cloning Primer Design Tool from TaKaRa (https://www.takarabio.com/learning-centers/cloning/primer-design-and-other-tools ...
-
bioRxiv - Developmental Biology 2021Quote: ... The resulting plasmids were co-transformed into Saccharomyces cerevisiae strain AH109 according to the protocols in the Matchmaker GAL4 Two-Hybrid System 3 (Clontech). The yeast cells were cultured on SD/-Leu-Trp (-LW ...
-
bioRxiv - Molecular Biology 2021Quote: ... reverse transcription of the RNA using a primer designed to the constant region of the barcoded adaptor with addition of an adapter to the 3’ end of the cDNA by template switching using SMARTScribe (Clontech) as described [18] (ii ...
-
bioRxiv - Genomics 2019Quote: ... These ligated pools were then amplified using AdR_PCR oligonucleotides as primer (5′ -GGTCGCGGCCGAGGATC-3′) (IDT) and Advantage cDNA polymerase mix (Clontech, 639105). Amplicons were electrophoresed in 1% agarose gel to check for amplification and the size distribution of the library and then column purified (Qiagen ...
-
bioRxiv - Genomics 2019Quote: ... reverse transcription was initiated from the bridge 3’ OH by adding 2 μL SMARTScribe Reverse Transcriptase (100 U/ μL, Clontech) and incubating for 1 h at 42 °C with shaking at 800 rpm ...
-
bioRxiv - Pathology 2020Quote: ... The PCR assay was conducted as described previously9 and the complete genome termini was determined using the Takara SMARTer RACE 5’/3’ kit (TaKaRa) following the manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2019Quote: Three specific 5’ RACE primers and two 3’ RACE primers were designed according to the Race kit instructions (Invitrogen & Clontech) (Table S1) ...
-
bioRxiv - Microbiology 2019Quote: ... Primers P5 and P6 were annealed to create a dsDNA molecule encoding the sgRNA sequence with 5’ and 3’ extensions to enable InFusion Cloning (Clontech) into BtgZI-digested pL6 ...
-
bioRxiv - Microbiology 2019Quote: ... the NS3 fragments with FLAG-tag and NS3 cDNA vector were ligated together at an approximate molar ratio of 1:3 using TaKaRa DNA Ligation Kit LONG (TAKARA) according to the manufacturer’s instructions.
-
bioRxiv - Cancer Biology 2019Quote: ... Lentiviral particles were concentrated from supernatant by mixing 3 parts supernatant with 1 part Lenti-X concentrator solution (ClonTech 631231), incubating overnight at 4 °C ...
-
bioRxiv - Developmental Biology 2019Quote: ... 5’ and 3’ RACE was carried out according to the manufacturer’s protocol of SMART RACE cDNA Amplification kit (Clontech, Takara, Japan). The sequences of primers for RACE are as follows ...
-
bioRxiv - Molecular Biology 2019Quote: ... interaction test and plasmid isolation were performed using the Yeast Protocols Handbook and Matchmaker GAL4TM Two-hybrid System 3 & Libraries User Manual (Clontech).
-
bioRxiv - Microbiology 2021Quote: ... CPER fragments containing WT or mutated or 3’UTRs were amplified from the plasmids using PrimeStar GXL polymerase (Takara, Japan) and gel-purified ...
-
bioRxiv - Plant Biology 2020Quote: ... The 5’-3’ junction sequence was amplified by PCR with cox1 specific primers Atcox1-5’(−176..-196) and Atcox1-3’(+17..+38) using Ex Taq Hot Start Version (Takara). The thermal cycling program consisted of initial 4 minute-denaturation at 95°C ...
-
bioRxiv - Microbiology 2021Quote: Evaluation of protein interactions by the GAL4-based Y2H system was performed by following the manufacturer’s recommendations for the Matchmaker GAL4 Two-hybrid System 3 (Clontech, USA). Competent AH109 yeast cells (Clontech ...
-
bioRxiv - Microbiology 2021Quote: ... reverse transcription of the RNA using a primer designed to the constant region of the barcoded adaptor with addition of an adapter to the 3’ end of the cDNA by template switching using SMARTScribe (Clontech) as described [3] ...