Labshake search
Citations for Takara Bio :
501 - 550 of 1043 citations for 3 Iodo 2 6 dimethyl benzoic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2020Quote: ... 1) were annealed to a complementary 20-nt primer containing a 5’-fluorescein label (5’FAM-GUCAUUCUCCUAAGAAGCUA-3’, Takara). To perform the primer extension assay ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... The template plasmid for the mCherry-targeting ssDNA was constructed with 1.5 kb long 5’ and 3’ arms amplified from the C57BL/6N genome using PrimeSTAR GXL DNA Polymerase (TaKaRa), the upstream genome sequence of the stop codon of Rtl5 and downstream of the predictive cut site by Cas9 ...
-
bioRxiv - Microbiology 2020Quote: 5’-RACE analysis was performed using SMARTer RACE 5’/3’ kit and In-Fusion HD Cloning kit according to the manufacturer’s instructions with slight modifications (Clontech). 5’-RACE ready cDNA was synthesized from purified mRNA (TG ...
-
bioRxiv - Immunology 2021Quote: ... Cells were harvested after 3 d and AAV6 was purified with a filtration-based kit (Takara AAVpro Purification Kit) per the manufacturer’s protocol ...
-
bioRxiv - Microbiology 2021Quote: ... The supernatant with the soluble His6-UppH was loaded on to a 3 ml TALON Metal Affinity Resin (Clontech) equilibrated in binding buffer (50 mM Na2HPO4 ...
-
bioRxiv - Cancer Biology 2023Quote: ... Reverse transcription of mRNA was performed using 3-5 μg RNA with RNA to cDNA EcoDry Premix (Takara, #639549). For real-time PCR analysis ...
-
Retrovirus-derived RTL9 plays an important role in innate antifungal immunity in the eutherian brainbioRxiv - Evolutionary Biology 2023Quote: ... The plasmid for mCherry insertion was constructed with 1.5 kb long 5’ and 3’ arms amplified from the C57BL/6N genome using PrimeSTAR GXL DNA Polymerase (TaKaRa). The 5’ arm is the genomic sequence upstream of the stop codon of Rtl9 and the 3’ arm is downstream of the predictive Cas9 cut site ...
-
bioRxiv - Microbiology 2022Quote: ... and the 3’ flanking region) and the linearized pHIS906 were fused using the In-Fusion enzyme (TAKARA, Shiga, Japan) to create the pHIS3-AWP1 plasmid ...
-
bioRxiv - Neuroscience 2024Quote: ... AAV was purified 3–5 days after transfection using AAVpro Purification Kit Midi or Maxi (Takara Bio, Shiga, Japan). The viral concentration was measured by qRT-PCR.
-
bioRxiv - Cell Biology 2024Quote: ... filtered through a 0.45 µm polyethersulfone filter and used directly or concentrated 3-fold with Lenti-X Concentrator (Clontech).
-
bioRxiv - Cell Biology 2022Quote: ... then imaged after overnight expression and ∼3 hour incubation with 500 nM A/C heterodimerizer linker drug (Takara, 635055) or 100% ethanol ...
-
bioRxiv - Molecular Biology 2022Quote: ... Tagged proteins were bound to 6 (=3 mL bed volume) or 3 mL (=1.5 mL bed volume) pre-equilibrated Talon SuperFlow Metal Affinity Resin from TaKaRa (LarA wt ...
-
bioRxiv - Immunology 2022Quote: ... Recombinant adenovirus vaccines were produced using the Adeno-X™ Adenoviral System 3 according to the manufacturer’s manual (Takara Korea Biomedical Inc. ...
-
bioRxiv - Plant Biology 2023Quote: ... and SD4 (-Trp-Leu-His-Ade) media at 30℃ for 3–5 d according to the manufacturer’s manual (Clontech).
-
bioRxiv - Biophysics 2024Quote: ... to reduce the detergent concentration and incubated for 3 h with 10 mL Talon metal affinity resin (Takara Biotech) pre-equilibrated with buffer S supplemented with 0.1% β-DDM and 0.02% CHS ...
-
bioRxiv - Immunology 2024Quote: ... sfGFP-3×P3-DsRed and homology arms were PCR-amplified using PrimeSTAR® Max DNA Polymerase (Takara Bio, R045). Primers for PCR were designed using the NEBuilder Assembly Tool ...
-
bioRxiv - Neuroscience 2024Quote: ... RNA was annealed to an oligo-dT primer (5’-AAGCAGTGGTATCAACGCAGAGTACT30VN-3’, IDT) in a buffer containing 2.5 mM dNTPs and recombinant RNase Inhibitor (Takara). First-strand synthesis was performed with the SuperScriptII kit using a custom template-switching oligo (5’-/5Me-isodC//iisodG//iMe-isodC/AAGCAGTGGTATCAACGCAGAGTACATrGrGrG-3’ ...
-
bioRxiv - Developmental Biology 2024Quote: ... The HRT for attaching GFP at the 3’ end of pan-1 was made by PCR (Takara PrimeStar Max) from plasmid pPD95.75 (Addene #1494 ...
-
bioRxiv - Systems Biology 2021Quote: ... We prepared ligation-free ribosome profiling and total RNA-seq libraries from the clarified polysome lysates treated for 6 hours following the instructions provided with their respective kits (smarter-seq smRNA-seq kit, Takara-Clontech; NEBnext Ultra-Directional II) augmented with our previously-published ligation-free ribosome profiling protocol42 ...
-
bioRxiv - Microbiology 2021Quote: ... 5 pmol of probe and 10 μl of Premix Ex Taq (2×) (Takara). Positive amplification controls were DNA purified from ASFV virions at different concentrations used as standards ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... Its male-specific exon was amplified using Advantage® 2 Polymerase Mix (TaKaRa), the gene-specific primer “Cpun_dsx OD2 3’RACE” ...
-
bioRxiv - Microbiology 2021Quote: ... 1 μl of cDNA was amplified using Advantage HF 2 DNA polymerase (Takara) for 25-30 cycles according to the manufacturer’s instructions (Fw 5’-GGGATTAAAGGTTTATACCTTCCC-3’ and Rv 5’-TCGTTGAAACCAGGGACAAG-3’) ...
-
bioRxiv - Microbiology 2021Quote: ... cDNA molecules were amplified using the Advantage 2 PCR kit (639206, Takara Bio) with initial denaturation at 95 °C for 1 min ...
-
bioRxiv - Microbiology 2020Quote: ... and 2 µl of lysate was used for PCR using SapphireAMP (Takara, RR350) and gene-specific primers ...
-
bioRxiv - Cell Biology 2021Quote: ... Primer sequences (Table 2) were verified using total human kidney RNA (Takara Bio). PSMB4 was determined as the most stable housekeeping gene using the method described by Xie ...
-
bioRxiv - Developmental Biology 2023Quote: ... Quantitative real-time PCR was carried out using 2× TB-Green premix (TaKaRa) on a LightCycler-480®II (Roche) ...
-
bioRxiv - Cancer Biology 2023Quote: ... and either 2 μg of the Tet-On-3G transactivator (pLVX Tet3G, Clontech) or 2 μg of the pLenti-CMVtight-Hygro-DEST plasmid with each cDNA of interest ...
-
bioRxiv - Cancer Biology 2024Quote: ... and 2 µl of lysate was used for PCR using SapphireAMP (Takara, RR350) and primers specific for each gene ...
-
bioRxiv - Molecular Biology 2022Quote: ... cDNA was synthesized by adding 2 μl of PrimeScriptTM RT reagent kit (TaKaRa) to 500μg of RNA samples in 8 μl of distilled water (DW ...
-
bioRxiv - Biochemistry 2023Quote: ... the supernatant was incubated for 2 hr with TALON metal affinity resin (Takara) pre-equilibrated with 50 mM Tris-HCl [pH 7.6] ...
-
bioRxiv - Genetics 2024Quote: ... and PCR was carried out using 2×Ex Taq Master Mix (TaKaRa CW0718). The PCR reaction was composed of 0.5 µg of template ...
-
bioRxiv - Genomics 2024Quote: ... 0.8 mM dNTP mix and 2 U Ex Taq polymerase (TaKaRa, Otsu, Japan). The thermal profile of the reaction started with initial stage 90 s at 94 °C which was followed by 30 cycles of 45 s denaturation at 94 °C ...
-
bioRxiv - Genomics 2024Quote: ... 1x Ex Taq buffer and 2 U Ex Taq polymerase (TaKaRa, Otsu, Japan). The thermal profile started with initial stage 94 °C for 3 min which was followed by 30 cycles of 1 min denaturation at 94 °C ...
-
bioRxiv - Neuroscience 2024Quote: ... per reaction and 2 µl of 5 µM SMART PCR primer (Takara Bio). Amplification was performed by incubating tubes on a thermocycler at 98°C for 3 minutes followed by 18 cycles of 98°C for 20 seconds ...
-
bioRxiv - Developmental Biology 2024Quote: ... The cDNA library was prepared using an Advantage 2 PCR Kit (Clontech, 639206) and then sequenced via the Illumina sequencing platform (NovaSeq 6000) ...
-
bioRxiv - Developmental Biology 2024Quote: ... rat monoclonal anti-E-cadherin antibody (ECCD-2) (1:200) (Takara, Cat# M108), mouse monoclonal anti-Yap1 antibody (MO1 ...
-
bioRxiv - Cell Biology 2020Quote: ... These ligated pools were then amplified using AdR_PCR oligonucleotides as primer (5′-GGTCGCGGCCGAGGATC-3′) (IDT) and Advantage cDNA polymerase mix (Clontech, 639105). Amplicons were electrophoresed in 1% agarose gel to check for amplification and the size distribution of the library and then column purified (Qiagen ...
-
bioRxiv - Cell Biology 2020Quote: ... TTAGCTAGCCTTCTGATGTGATAGTTTATC TTCTG-3’ were used to amplify the 3xFLAG-BBS10 from the BBS10 ORF plasmid using CloneAmp HiFi PCR premix (Takara), which was further cloned into the CD520A-GFP plasmid via XbaI and Nhe I restriction sites ...
-
bioRxiv - Developmental Biology 2021Quote: ... Specific forward and reverse primers (Suppl Table 3) were designed using the In-Fusion Cloning Primer Design Tool from TaKaRa (https://www.takarabio.com/learning-centers/cloning/primer-design-and-other-tools ...
-
bioRxiv - Developmental Biology 2021Quote: ... The resulting plasmids were co-transformed into Saccharomyces cerevisiae strain AH109 according to the protocols in the Matchmaker GAL4 Two-Hybrid System 3 (Clontech). The yeast cells were cultured on SD/-Leu-Trp (-LW ...
-
bioRxiv - Molecular Biology 2021Quote: ... reverse transcription of the RNA using a primer designed to the constant region of the barcoded adaptor with addition of an adapter to the 3’ end of the cDNA by template switching using SMARTScribe (Clontech) as described [18] (ii ...
-
bioRxiv - Pathology 2020Quote: ... The PCR assay was conducted as described previously9 and the complete genome termini was determined using the Takara SMARTer RACE 5’/3’ kit (TaKaRa) following the manufacturer’s instructions ...
-
bioRxiv - Microbiology 2021Quote: ... CPER fragments containing WT or mutated or 3’UTRs were amplified from the plasmids using PrimeStar GXL polymerase (Takara, Japan) and gel-purified ...
-
bioRxiv - Plant Biology 2020Quote: ... The 5’-3’ junction sequence was amplified by PCR with cox1 specific primers Atcox1-5’(−176..-196) and Atcox1-3’(+17..+38) using Ex Taq Hot Start Version (Takara). The thermal cycling program consisted of initial 4 minute-denaturation at 95°C ...
-
bioRxiv - Microbiology 2021Quote: Evaluation of protein interactions by the GAL4-based Y2H system was performed by following the manufacturer’s recommendations for the Matchmaker GAL4 Two-hybrid System 3 (Clontech, USA). Competent AH109 yeast cells (Clontech ...
-
bioRxiv - Microbiology 2021Quote: ... reverse transcription of the RNA using a primer designed to the constant region of the barcoded adaptor with addition of an adapter to the 3’ end of the cDNA by template switching using SMARTScribe (Clontech) as described [3] ...
-
bioRxiv - Microbiology 2020Quote: ... was co-transformed with different bait-prey combinations as indicated in Extended Data Fig.1 in accordance with instructions for Matchmaker GAL4 Two-Hybrid System 3 (Clontech). The transformed yeast was then screened in 4-dropout plates for the protein-protein interaction.
-
bioRxiv - Neuroscience 2021Quote: ... DNA fragments for both 5’- and 3’-homologous arms were amplified using PrimeSTAR GXL DNA polymerase (TaKaRa Clontech cat# R050) from the genome DNA of Canton-S wild-type strain of D ...
-
bioRxiv - Neuroscience 2021Quote: ... DNA fragments for both 5’- and 3’-homologous arms were amplified using PrimeSTAR GXL DNA polymerase (TaKaRa Clontech cat# R050) from the genome DNA of Canton-S wild-type strain of D ...
-
bioRxiv - Biophysics 2020Quote: Target DNA containing the 5′-TTTA-3′ PAM was ordered from IDT and cloned into a pET28-MHL vector using the In-Fusion Cloning Kit (ClonTech). Plasmids were linearized before usage ...