Labshake search
Citations for Qiagen :
101 - 150 of 2036 citations for Polystyrene Latex Beads 5 um since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2024Quote: ... lysis buffer and homogenized at 1000 rpm for 2 min with 5 mm Stainless Steel Beads (Qiagen) using 1600 MiniG Tissue Homogenizer (SPEX SamplePrep) ...
-
bioRxiv - Plant Biology 2024Quote: ... Bead binding was performed by adding washed beads (Ni-NTA agarose beads (Qiagen) for His-tagged proteins and GSH agarose beads (ABT ...
-
bioRxiv - Microbiology 2023Quote: ... and homogenised with 3-5 mm steel beads in a TissueLyser II (Qiagen, 24 Hz, 2 × 3 min). 350 μL lysed blood or 200 μL lysed head kidney were transferred to a Magna Pure 96 Processing Cartridge (Roche) ...
-
bioRxiv - Microbiology 2023Quote: ... Edmund Bühler) by bead beating twice for 5 min at 30 Hz in a Tissue Lyzer II (QIAGEN). Lysates were then incubated for 30 min at 37 °C with shaking ...
-
bioRxiv - Bioengineering 2024Quote: ... with ∼5-10 mg of each organ homogenized into 300 μL homogenization buffer using stainless steel beads (Qiagen) in a TissueLyser II tissue homogenizer (Qiagen ...
-
bioRxiv - Genomics 2020Quote: ... together with 0.2 uM of each biotinylated primer and 0.25 units of HotStarTaq PlusDNA Polymerase (Qiagen). Refer to Supplementary Table 10 for primer sequences ...
-
bioRxiv - Microbiology 2022Quote: ... the supernatant was filtered with 0.22-um membrane filter and loaded on Ni-NTA agarose (Qiagen) and ...
-
bioRxiv - Neuroscience 2021Quote: ... A 5 mm stainless steel bead was subsequently used to homogenize the tissue using the TissueLyser II system (Qiagen) for 2x 5 min at 20 hz ...
-
bioRxiv - Synthetic Biology 2021Quote: ... the biofilms were disrupted by pipetting thoroughly and homogenized with a stainless bead beater 5 mm in diameter (Qiagen) for 10 min at a frequency of 30 beats per second by TissueLyser II (Qiagen) ...
-
bioRxiv - Physiology 2021Quote: ... PBS) using a 5 mm stainless steel bead at 30 hertz for 45 seconds in a TissueLyser II (Qiagen). Samples were then centrifuged at 10,000 g for 10 minutes at 4°C ...
-
bioRxiv - Physiology 2020Quote: ... PBS) using a 5 mm stainless steel bead at 30 hertz for 45 seconds in a TissueLyser II (Qiagen). Samples were then centrifuged at 10,000 rcf for 10 minutes at 4°C ...
-
bioRxiv - Physiology 2021Quote: ... PBS) using a 5 mm stainless steel bead at 30 hertz for 45 seconds in a TissueLyser II (Qiagen). Samples were then centrifuged at 10,000 rcf for 10 minutes at 4C ...
-
bioRxiv - Physiology 2021Quote: ... PBS) using a 5 mm stainless steel bead at 30 hertz for 45 seconds in a TissueLyser II (Qiagen). Samples were then centrifuged at 10,000 rcf for 10 minutes at 4°C ...
-
bioRxiv - Immunology 2023Quote: ... 14-666-315) containing 1 mL sterile PBS and one 5 mm stainless steel bead (QIAGEN Cat. No. 69989). Nucleic acids were isolated from excised granulomas by homogenizing in TRIzol (Invitrogen ...
-
bioRxiv - Molecular Biology 2023Quote: ... The kidneys were homogenized using 0.5 M acetic acid and two 5-mm steel beads in TissueLyser LT (Qiagen), followed by addition of pepsin to 0.1 mg/ml and incubation for 3 days ...
-
bioRxiv - Cell Biology 2023Quote: ... The supernatant was 0.2 µM filtered and was incubated overnight at 4°C with 5 mL of Ni-NTA beads (Qiagen). XXX
-
bioRxiv - Cancer Biology 2023Quote: Genomic DNA and RNA from healthy tissues and lymphomas of control and STIL-transgenic mice was extracted using the All Prep DNA/RNA/Protein Mini Kit according to manufacturer’s instructions after tissue homogenization using TissueLyser II and stainless-steel beads (5 mm, all Qiagen). DNA and RNA concentrations were quantified with Qubit 2.0 using the dsDNA High Sensitivity and RNA High Sensitivity Kit (both Thermo Scientific) ...
-
bioRxiv - Physiology 2024Quote: Frozen tissue was transferred into pre-chilled 2 ml microfuge tubes containing two 5 mm stainless steel beads (Qiagen) and 5 volumes of ice-cold buffer (10 mM HEPES buffer pH 7.5 ...
-
bioRxiv - Genomics 2023Quote: ... The 0.22 uM filter was used for DNA extraction using the RNeasy Power water kit (Qiagen, 14700) as per the manufacturer’s instructions ...
-
bioRxiv - Genetics 2020Quote: ... in a 2 ml Eppendorf (Hamburg, Germany) tube using Stainless Steel Beads (5 mm) and the TissueLyzer (QIAGEN, Venlo, Netherlands). After an incubation time of 5 min ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The entire flies were mechanically crushed for 30 s at 25 Hz using a 5-mm stainless steel bead in a TissueLyser (Qiagen). Three hundred μL of ACL solution and 20 μL of 16 g.L-1 proteinase K were then added to the samples ...
-
bioRxiv - Neuroscience 2020Quote: ... 10 to 20 mg of frozen tissue was dissociated using 400 μl of RLT Plus in a 2mL extraction tube containing a 5 mm diameter beads (Qiagen) and agitated at 30 HZ for twice 2 minutes in the TissueLyser II (Qiagen) ...
-
bioRxiv - Plant Biology 2020Quote: ... All other tissues were homogenized in a SPEX CertiPrep 2010-230 Geno/Grinder (Cat No.: 12605297, Fischer Scientific) using 5 mm steel beads (Cat No.: 69989, Qiagen); tubes were shaken in 20 sec bursts at 1500 rpm ...
-
bioRxiv - Plant Biology 2022Quote: Grains were homogenized using mortar and pestle with liquid nitrogen while other tissues were homogenized in SPEX CertiPrep 2010-230 Geno/Grinder (Cat No.: 12605297, Fischer Scientific) using 5 mm steel beads (Cat No.: 69989, Qiagen). For grain samples ...
-
bioRxiv - Microbiology 2021Quote: ... Blood was collected by cardiac puncture and harvested organs were homogenized in 500 μl PBS with two 5 mm stainless steel beads using a tissue lyser (Tissue-Lyser II, Qiagen) for two 2-minute rounds at 30 Hz and centrifuged to pellet debris for 10 minutes at 8,000 rpm ...
-
bioRxiv - Microbiology 2021Quote: ... placed in 250 μL PBS containing a 5 mm stainless steel bead and homogenized using a tissue lyser (Tissue-Lyser II, Qiagen) for 2-minutes at 30 Hz ...
-
bioRxiv - Microbiology 2020Quote: ... and a portion of the tissue (0.08-0.3g) was placed into pre-labeled microcentrifuge tubes containing 5 mm stainless steel beads (Qiagen Inc., CA). Lung samples were homogenized with DMEM + 2% FBS in a TissueLyser (Qiagen Inc. ...
-
bioRxiv - Microbiology 2021Quote: ... samples were weighed and homogenized in DMEM containing 10% FBS and 1% antibiotics using 5 mm stainless steel beads (Qiagen) and the TissueLyser II (Qiagen) ...
-
bioRxiv - Pathology 2021Quote: Striped dolphin brain and lung samples were submitted to total RNA extraction using the TissueLyser II (QI-AGEN) and highspeed shaking in Eppendorf tubes with stainless steel beads (5 mm diameter, QIAGEN). Homogenates were centrifuged at 14,000 rpm for 3 min to remove tissue debris ...
-
bioRxiv - Microbiology 2021Quote: ... up to 200 mg of tissue was disrupted in TRIzol (Lifetechnologies) with 2 x 5 mm stainless steel beads using the TissueLyser (Qiagen) for 3 minutes at 25 r/s twice ...
-
bioRxiv - Microbiology 2020Quote: ... up to 200 mg of tissue was disrupted in TRIzol (Lifetechnologies) with 2 x 5 mm stainless steel beads using the TissueLyser (Qiagen) for 3 minutes at 25 r/s twice ...
-
Identification and biochemical characterization of a novel eukaryotic-like Ser/Thr kinase in E. colibioRxiv - Microbiology 2020Quote: ... Lysates were cleared by centrifugation at 15000 x g for 30 min at 4 °C and incubated in Pierce 5 ml columns with Ni-NTA agarose beads (Qiagen) at 4 °C for 1 h ...
-
bioRxiv - Microbiology 2023Quote: ... These tissues were then weighed and homogenized by either Omni homogenizer (Omni International, Omni Tissue Homogenizer (TH) 115V) or by 5-mm stainless steel beads with a TissueLyser (Qiagen) and used for onward analysis of infectious virus and vRNA quantification ...
-
bioRxiv - Biochemistry 2023Quote: ... The supernatant was incubated for 30 min at 4 °C with 5 mL of Ni2+-beads (Qiagen Ni-NTA Superflow) equilibrated in lysis buffer ...
-
bioRxiv - Molecular Biology 2023Quote: ... Mosquito bodies and legs were homogenized in phosphate-buffered saline (PBS) supplemented with 20% FBS and 2% penicillin-streptomycin with 5-mm stainless steel beads with a TissueLyser (Qiagen) before RNA isolation ...
-
bioRxiv - Biophysics 2022Quote: ... Cell debris was cleared by centrifugation at 40,000 g for 45 min at 4°C and supernatant was applied to His-tag affinity purification using Ni-NTA agarose (beads or 5 ml column, Qiagen) in buffer A (50 mM TRIS ...
-
bioRxiv - Plant Biology 2024Quote: ... The fresh leaf discs were transferred to a 2 mL tube containing a 5 mm stainless steel bead and 500 µL buffer RLT (QIAGEN). The leaf discs were disrupted using a TissueLyser LT (QIAGEN ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Approximately 50 mg of tissue was homogenised in 500 µl phosphate-buffered saline (PBS) for 2 min at 30 Hz using 5 mm steel beads on a TissueLyser II instrument (Qiagen). Total nucleic acids were extracted using the Nucleo Mag Vet Kit (Macherey & Nagel ...
-
bioRxiv - Biochemistry 2022Quote: Approximately 25 mg of frozen tissues were transferred to 2 mL Eppendorf Protein Lobind tubes containing one 5 mm stainless steel bead (cat# 69989, Qiagen) and 500 µL of lysis buffer consisting of 5% SDS in 50 mM TEAB with protease inhibitors cocktail (cat# A32953 ...
-
bioRxiv - Microbiology 2023Quote: ... calf muscle and pancreas were collected in 500 μl of PBS containing one (heart and pancreas) or two (calf muscle) 5 mm stainless steel beads (QIAGEN), homogenized with TissueLyser II (QIAGEN ...
-
bioRxiv - Physiology 2024Quote: ... was mechanically homogenised in TRI reagent with a 5 mm steel bead at 30 Hz for 2 x 30 s (TissueLyser II, Qiagen) then centrifuged for 10 min at 10,000 g ...
-
bioRxiv - Physiology 2024Quote: Tissues were disrupted using stainless steel beads of 5 mm diameter in a Tissue Lyser LT (Qiagen, Venlo, The Netherlands). The resulting tissue homogenates were purified using the RNeasy Plus Mini Kit (Qiagen ...
-
bioRxiv - Synthetic Biology 2024Quote: ... two small lab spoons (5 mm) of biomass were transferred to a 2 mL screw cap tube with a steel bead inside (5 mm; Qiagen) and frozen using liquid nitrogen ...
-
bioRxiv - Cancer Biology 2024Quote: ... and homogenised in NP40 lysis buffer (as described previously) using mechanical shearing with 5 mm stainless steel metal beads (Qiagen). Debris were cleared by centrifugation ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... flies were individually crushed in 400 µL of lysis buffer by a sterile 5-mm stainless bead shacked by a TissueLyser® (Qiagen) for 30 s at 25 Hz ...
-
bioRxiv - Biochemistry 2020Quote: ... embryo pellets were homogenized by cryo-milling after addition of a 2.5 or 5 mm steel bead using a tissue lyser (QIAgen TissueLyser II) at 25 Hz for 15 seconds 3-6 times ...
-
bioRxiv - Genomics 2022Quote: The second lobe of lung or trachea was immersed in 1 mL PBS in a 2 mL Micro Centrifuge Tube (Fisherbrand, 14-666-315) containing one stainless steel bead (5 mm, QIAGEN, 1026563) immediately after dissecting the SARS-CoV-2 infected mouse or hamster ...
-
bioRxiv - Genomics 2022Quote: ... The swabs were placed in Red 1.5 mL RINO® screw-cap tubes (NextAdvance) pre-filled with RNase-free zirconium oxide beads and QIAzol Lysis Reagent (Qiagen) was added ...
-
bioRxiv - Genetics 2020Quote: ... suspended in 1 mL of (v/v) 50% ACN and homogenized in a bead mill (50 Hz, 5 min; TissueLyser LT, Qiagen, Germany) using two 5 mm tungsten balls ...
-
bioRxiv - Bioengineering 2024Quote: ... posterior eye cups (PECs) were separated and collected in 2 mL reinforced tubes (SPEX Sample Prep) containing 5 mM stainless steel beads (Qiagen, LLC).