Labshake search
Citations for Pall :
1 - 50 of 76 citations for Anti Desmoglein 1 Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: KD determination of full-length antibodies: Protein A biosensors (Pall ForteBio) were used to immobilize recombinant antibodies at 2.7 μg/ml for 1min ...
-
bioRxiv - Bioengineering 2019Quote: ... the anti-CHO HCP Detection Kit (Pall) was used according to the manufacturer’s specifications ...
-
bioRxiv - Cell Biology 2023Quote: Eluted proteins from light and heavy samples prepared with method 1 were mixed at a 1:1 ratio and added onto 10-kDa cutoff-filter (OD010C33, PALL) followed by addition of 1 µL 1mM DTT ...
-
bioRxiv - Biophysics 2020Quote: ... and anti-GST (GST)) were purchased from Pall FortéBio ...
-
bioRxiv - Cell Biology 2020Quote: ... 1% Ultroser G (Pall corporation ...
-
bioRxiv - Cell Biology 2023Quote: ... and 1% UltroserG (Pall Life Sciences ...
-
bioRxiv - Plant Biology 2019Quote: ... Samples were diluted 1:1 with sample diluent buffer (Pall FortéBio cat18-1091) to a concentration of 0.142 mg/ml for analysis using the BLITzⓇ system ...
-
bioRxiv - Cell Biology 2020Quote: ... A 1:1 mixture of DMEM/F12 supplemented with 2% Ultroser G (PALL Corp.) was used for the culture medium ...
-
bioRxiv - Cancer Biology 2023Quote: ... 1% of Ultroser G (Pall), and 1% Penicillin/Streptomycin (GIBCO) ...
-
bioRxiv - Physiology 2022Quote: ... 1% Ultroser G (Pall Life Sciences), antibiotic-antimycotic mix (Gibco)] and plated on uncoated dishes (NUNC) ...
-
bioRxiv - Immunology 2020Quote: The binding sites of obtained antibodies to RBD was examined by Blitz system (ForteBio, Pall Lifesciences). 10 μg/ml Biotinylated RBD protein was captured by streptavidin biosensor (ForteBio ...
-
bioRxiv - Biophysics 2022Quote: ... The data were analysed and fit to a 1:1 model using ForteBio Data Analysis 12 (Pall Fortebio).
-
bioRxiv - Molecular Biology 2023Quote: ... mixed in of 1:1 molar ratio and concentrated using a centrifugal device with 3 kDa cutoff (Pall) at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... 1% UltroserG (Pall Life Sciences, Washington USA) and antibiotic/antimycotic mix (Gibco/Invitrogen Inc) ...
-
bioRxiv - Cancer Biology 2021Quote: ... 1% UltroserG (Pall Life Sciences #15950-017) and 1% Pen/Strep ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... 1 (AcroVent 0.2μm PTFE, Pall Corporation, 4249)
-
bioRxiv - Microbiology 2020Quote: ... then transferred to air-liquid interface where cells were maintained in 1:1 mixture of Ham’s F12/DMEM media supplemented with 2% Ultroser G (Pall Biosepra ...
-
bioRxiv - Immunology 2021Quote: ... Antibodies were concentrated and re-suspended in PBS using 30 kDa cutoff Macrosep Advanced Centrifugal Devices (Pall Corporation). To purify monoclonal antibodies ...
-
bioRxiv - Genetics 2019Quote: ... 1 L water on a 0.45 μm cellulose filter (Pall MicroFunnel 300 ST; Pall Corporation, New York, USA; Table 1) or two replicate samples of c ...
-
bioRxiv - Cell Biology 2020Quote: ... 1% Ultroser G (Pall Life Sciences, Washington, USA), 100uM Beta-mercapto-ethanol ...
-
bioRxiv - Cancer Biology 2019Quote: ... GST or GST-tagged RBDvs were immobilized onto anti-GST biosensors (Pall ForteBio) at a concentration of 2 µg/ml ...
-
bioRxiv - Bioengineering 2021Quote: ... Peptides were isolated from antibody and MHC molecules using a passivated 10K molecule weight cutoff filters (PALL Life Science), lyophilized ...
-
bioRxiv - Cancer Biology 2022Quote: ... Peptides were isolated from antibody and MHC molecules using a passivated 10K molecule weight cutoff filter (PALL Life Science), lyophilized ...
-
bioRxiv - Developmental Biology 2021Quote: ... Antibodies were tested for binding to the ACVR1 ECD by biolayer interferometry using an Octet HTX instrument (Pall/Forte Bio). Confirmed binders were evaluated for the ability to block BMP-mediated ACVR1 signaling in a cell-based reporter assay described below.
-
bioRxiv - Genomics 2022Quote: ... Sample suspensions were then centrifuged at 500 rpm (Genevac EZ-2) for 10 min before filtering through 1 mL 96 well filter plates (glass fiber, 1 μm, Pall, New York, NY) into 1 mL 96 well plates and sealed with a silicone plate mat (Agilent ...
-
bioRxiv - Microbiology 2021Quote: The kinetics of GPΔmuc and GPΔmuc-presenting NP binding to a panel of 10 antibodies was measured using an Octet RED96 instrument (FortéBio, Pall Life Sciences). All assays were performed with agitation set to 1000 rpm in FortéBio 1× kinetic buffer ...
-
bioRxiv - Microbiology 2021Quote: ... binding to a panel of known antibodies (in the IgG form) was measured using an Octet RED96 instrument (FortéBio, Pall Life Sciences). All assays were performed with agitation set to 1000 rpm in FortéBio 1× kinetic buffer ...
-
bioRxiv - Microbiology 2019Quote: The kinetics of E2 cores and nanoparticle binding to HCV-specific antibodies was measured using an Octet Red96 instrument (fortéBio, Pall Life Sciences). All assays were performed with agitation set to 1000 rpm in fortéBio 1× kinetic buffer ...
-
bioRxiv - Molecular Biology 2021Quote: ... Eluate from column 1 above 15 mAU was flowed through a 1-mL pre-packed HyperCel STAR AX column (Pall Corporation, Port Washington, NY). Flow-through from column 2 above 15 mAU was collected.
-
bioRxiv - Bioengineering 2020Quote: ... Eluate from column 1 above 15 mAU was flowed through a 1-mL pre-packed HyperCel STAR AX column (Pall Corporation, Port Washington, NY). Flow-through from column 2 above 15 mAU was collected.
-
bioRxiv - Molecular Biology 2024Quote: ... Data were collected and globally fitted by a 1:1 stoichiometry model using the Data Acquisition and Data Analysis Software vHT 11.1 (ForteBio, Pall Life Sciences, New York, USA). The fitting met the quality criteria χ2 < 3 and R2 ≥ 0.96.
-
bioRxiv - Microbiology 2020Quote: ... a 1 µ prefilter (Acrodisc syringe glass fiber, Pall Laboratory) and a 0.2 µ polyethersulfone (PES ...
-
bioRxiv - Microbiology 2021Quote: ... at 1 μg/mL in undiluted 10X kinetics buffer (Pall) to SA sensors that were pre-hydrated in water for at least 10 minutes and then equilibrated into 10X Kinetics Buffer (Pall) ...
-
bioRxiv - Genetics 2019Quote: ... 1 L water on a 0.45 μm cellulose filter (Pall MicroFunnel 300 ST ...
-
bioRxiv - Genetics 2022Quote: ... In vivo biotinylated iMab-MycAviTag antibody fragments were purified by affinity chromatography and biotinylation confirmed by biolayer interferometry using a BLItz system (Pall ForteBio LLC) and streptavidin sensors.
-
bioRxiv - Immunology 2021Quote: ... (1) Biotinylated ACE2 (300 nM) was loaded on Streptavidin biosensors (Pall ForteBio) to a load threshold of 0.4-0.6 nm ...
-
bioRxiv - Microbiology 2021Quote: ... separated on a 1% agarose gel and transferred onto a nylon membrane (Pall membrane). For hybridisation experiments radioactively labeled PCR probes against the selected targets were generated using DECAprime II DNA labeling kit and [α-32P]dCTP (Life Technologies ...
-
bioRxiv - Microbiology 2023Quote: ... 1 mM DTT using a centrifugation column with a 3 kDa MWCO (Pall Corporation) prior to use and/or storage ...
-
bioRxiv - Immunology 2023Quote: Recombinant human PD-1 protein was biotinylated and loaded using SA sensor (Pall Corporation). Six concentrations of Finotonlimab and Nivolumab were added for real-time association and dissociation analysis using Octet system ...
-
bioRxiv - Biochemistry 2020Quote: ... The 2G12 and PG16 bNAbs in 0.5X Kinetics Buffer (PBS with 0.02% Tween and 0.05 mg/mL BSA) were loaded onto an anti-Human IgG Fc Capture sensor (Pall ForteBio Corp). Binding kinetics were determined using serial dilutions of CHO-K1-produced and Expi293F-produced gp145 ...
-
bioRxiv - Biochemistry 2021Quote: ... For binding analysis biotinylated antigen (1 μg/mL) were immobilized on streptavidin (SA) biosensors (Pall) for 300 sec to ensure saturation ...
-
bioRxiv - Cell Biology 2019Quote: ... 1 μl of the solution was spotted on a nitrocellulose membrane (BioTrace™ NT, Pall Corporation) in quadruplicate and allowed to dry for 30 minutes ...
-
bioRxiv - Immunology 2022Quote: ... 1 mM EDTA) and concentrated to 500 ml using a Centramate tangential flow filtration system (Pall). It was loaded on a Strep-Tactin®XT Superflow® resin (IBA ...
-
bioRxiv - Cancer Biology 2022Quote: ... The cell suspension was made by diluting 300,000 cells in 1 ml of DPBS-0.01% Pluronic solution that was sterile filtered with a 0.2 μm filter (Pall). The cell suspension was loaded to a 1ml syringe (NIPRO ...
-
bioRxiv - Microbiology 2021Quote: ... the residual silica was removed by filtration in CHCl3/MeOH 2:1 v/v using a Acrodisc CR 13 mm Syringe Filter (0.2 µm PTFE membrane, PALL Life Sciences ...
-
bioRxiv - Neuroscience 2022Quote: ... and 1× PBS (incl. 130 mM NaCl) and HaPrP23-231 filtered using 100-kD centrifugal filters (Pall Nanosep OD100C34) at a concentration of 0.1 mg/ml ...
-
bioRxiv - Microbiology 2022Quote: ... Vesicles were sampled by collecting 1 mL of culture and filtering it through a 0.22 µm Supor syringe filter (Pall). The <0.22 µm fraction was stored at -20 °C until ready for analysis ...
-
bioRxiv - Microbiology 2021Quote: ... CCoV-HuPn-2018 or TGEV biotinylated RBD was immobilized at 1 μg/mL in undiluted 10X kinetics buffer (Pall) to SA sensors that were prehydrated in water for at least 10 minutes and then equilibrated into 10X Kinetics Buffer (Pall) ...
-
bioRxiv - Bioengineering 2020Quote: ... annealed at 70 °C for 1 h and allowed to equilibrate at room temperature overnight before filtering with a 0.2 μm nylon filter (Pall). SAXS measurements were performed with 5 seconds acquisition times with no observable beam damage.
-
bioRxiv - Synthetic Biology 2022Quote: ... the protein mixture was purified on 1 mL HisTrap column (Cytiva) and the pure protein was concentrated by Pall centrifugal device with MWCO 10 kDa and stored at 4°C.