Labshake search
Citations for BioSpec :
251 - 300 of 303 citations for 6 Isoquinolinol 1 4 5 dimethoxy 2 5 6 6a 7 tetrahydro 1 2 10 trimethoxy 6 methyl 4H dibenzo de g quinolin 9 yl oxy phenyl methyl 1 2 3 4 tetrahydro 7 methoxy 2 methyl S R* R* 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Physiology 2023Quote: ... in 1 ml methanol/water 80:20 (vol/vol) by means of Mini-BeadBeater-16 (Cat # 607, Biospec, Bartlesville, OK) for 1 minute ...
-
bioRxiv - Immunology 2021Quote: ... and 1.0 mm zirconia beads (5.5 g/cc; Biospec Products) and immediately homogenized by bead-beating in a mini-beadbeater (Biospec Products ...
-
bioRxiv - Genomics 2023Quote: ... and 1.5 g of 2.3-mm Zirconia beads (BioSpec Inc) in 800 µl of AVL buffer using the Benchmark Bead Bug-6 homogenizer at a speed of 4,350 rpm for 45 sec for 2 cycles with a 1 min rest in between ...
-
bioRxiv - Molecular Biology 2022Quote: The head was homogenized by grinding in microbeads for 20 s at 40 Hz (Biospec, USA). Then ...
-
bioRxiv - Microbiology 2020Quote: ... Samples were transferred to – 80° for at least 1 hour before bead beating with 2.3 mm zirconia-silica beads (Biospec: No. 11079125z) for 1 minute in 0.2 mL TRIsure (Bioline ...
-
bioRxiv - Genetics 2020Quote: ... cell pellets were resuspended in 1 mL FA lysis buffer without EDTA + 0.1% SDS and ∼500 μL 0.5-mm zirconia/Silica beads (BioSpec Products; Bartlesville, OK) were added ...
-
bioRxiv - Synthetic Biology 2023Quote: ... 100 mM NaCl and 20 mM Tris/HCl (pH 8)), 200 μl phenol-chloroform-isoamyl-alcohol (pci, 25:24:1) and 200 μl 425-600 μm glass beads (BioSpec Products) were added into each tube ...
-
bioRxiv - Immunology 2023Quote: ... organ and stool samples were homogenized in 1 ml PBS plus 0.1% Tween 20 with a mini-beadbeater (BioSpec Products Inc.), serially diluted in PBS plus 0.1% Tween 20 ...
-
bioRxiv - Cell Biology 2024Quote: Synchronized worms were collected into a homogenization tube with 200 μL of 50% methanol and 100 μL of 1 mm Zirconia beads (BioSpec, #11079110zx). Worms were homogenized by Precellys Evolution (Bertin ...
-
bioRxiv - Plant Biology 2020Quote: ... About 0.2 g of zirconium/silica beads 0.1 mm (BioSpec Products) were added and bacterial lysis was carried out in two rounds of shaking for 10 s at a speed of 6.5 in a FastPrep machine (FP120 Bio101 Savant) ...
-
bioRxiv - Microbiology 2020Quote: One cm sections of the medial and distal colon were removed post necropsy and the tissue pieces were homogenized in 1 mL of sterile PBS using a minibeadbeater-16 (BioSpec Products, Inc.). Dilution series of the homogenates were plated on LB Gm plates ...
-
bioRxiv - Developmental Biology 2021Quote: ... LJ tissue was disrupted and homogenized by bead beating with two 0.125-inch stainless steel beads for 1 minute in a Mini-Beadbeater-16 (Biospec Products, Bartlesville, OK). Total RNA was extracted using the RNeasy Plus Mini Kit per the manufacturer’s instructions (Qiagen ...
-
bioRxiv - Physiology 2020Quote: ... digestive tracts were dissected and transferred into 1 mL sterile PBS which was then mechanically disassociated using a Tissue-Tearor (BioSpec Products, 985370). 100 μL of serially diluted solution was then spread on a Tryptic soy agar (TSA ...
-
bioRxiv - Microbiology 2019Quote: ... and sections of the mid-colon were removed and homogenized in 1 mL of sterile PBS using a minibeadbeater-16 (BioSpec Products, Inc.). 200 uL of tissue homogenate from the colon were plated on LB agar + Gm + Km to recover viable transposon-insertion mutants ...
-
bioRxiv - Microbiology 2021Quote: ... and placed individually in 1 ml of sterile DPBS containing zirconia/silica beads of diameter 2.3 mm (BioSpec Products, Inc, Bartlesville, OK, USA). Organs were homogenized by bead-beating for one min and then placed on ice ...
-
bioRxiv - Neuroscience 2021Quote: ... 1.8 g of stainless beads (3.2 mm, Cat. No. 11079132ss; BioSpec Products, Inc.) were carefully added to the reinforced tube ...
-
bioRxiv - Microbiology 2021Quote: ... with 1.5 g of 1.0-mm glass beads (BioSpec Products, Inc., Bartlesville, OK) and 1 ml of 1 PBS ...
-
bioRxiv - Immunology 2021Quote: ... at 4,800 RPM with 1.0 mm zirconia beads (5.5 g/cc; Biospec Products) in sterile PBS ...
-
bioRxiv - Microbiology 2023Quote: ... Four 3 mm zirconia beads (BioSpec Products, Bartlesville, OK, USA) and about 100 mg of 0.1 mm zirconia/silica beads (BioSpec Products ...
-
bioRxiv - Genetics 2023Quote: ... Cells were resuspended in ice-cold lysis buffer and disrupted by adding glass beads and vigorous shaking for ten times 30 s in a Mini-Beadbeater (Biospec Products). After centrifugation (20800 g ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... a volume of 1 mL was mixed with an equal volume of 0.1-mm glass beads and cells were broken by eight rounds of 30 s of bead beating in a Mini-BeadBeater (BioSpec Products). Samples were centrifuged at 4000 rpm for 15 min in 10 °C to remove cell debris ...
-
bioRxiv - Physiology 2024Quote: ... 15% water with 0.5 g of 2.7 mm dia glass beads (BioSpec Products, OK, USA) and SPEX SamplePrep 1600 miniG (Cole-Parmer ...
-
bioRxiv - Neuroscience 2019Quote: ... 37±3 mg beads (1.0 mm zirconia/silica beads, BioSpec Products) were added and tubes sealed with Parafilm (Pechiney Plastic Packaging Company ...
-
bioRxiv - Genomics 2020Quote: ... 3 mM DTT) containing 100$L of glass beads (BioSpec 11079105). Samples were vortexed in 5 cycles of one minute vortexing followed by one minute on ice ...
-
bioRxiv - Immunology 2019Quote: MR acquisitions were performed on a 3 Tesla horizontal MR system (Bruker Biospec) with a dual-tuned 1H/13C mouse head volume coil (2cm diameter ...
-
bioRxiv - Microbiology 2023Quote: ... 0.25 g sediment (wet weight) was lysed using PowerBead Tubes in a bead-beater (Biospec Mini-beadbeater-24). Kit solutions (C1 – C6 ...
-
bioRxiv - Genomics 2023Quote: ... the tissue was bead beaten using 0.8 g of 1.0 mm Zirconia beads (BioSpec Inc, Bartlesville, OK, USA) and 1.5 g of 2.3-mm Zirconia beads (BioSpec Inc ...
-
bioRxiv - Microbiology 2023Quote: ... with the addition of an initial bead-beating step using 0.1 mm beads for bacteria and 0.5 mm beads for fungi (0.25 g beads, BioSpec Products BeadBeater).
-
bioRxiv - Neuroscience 2022Quote: MRI experiments were performed on a Bruker 3 Tesla small-bore scanner (BioSpec 30/18). A radiofrequency (RF ...
-
CRISPR-Cas9-mediated knockout of CYP79D1 and CYP79D2 in cassava attenuates toxic cyanogen productionbioRxiv - Plant Biology 2021Quote: ... Frozen leaf tissue was ground by 3-mm glass beads in Minibeadbeater (Biospec Products, Inc.) and resuspended in extraction buffer (1.4 M NaCl ...
-
bioRxiv - Genomics 2019Quote: ... and subjected to 3 minutes of bead beating with .5mm zirconia glass beads (BioSpec Products) in a bead mill ...
-
bioRxiv - Microbiology 2022Quote: ... whole feces (~0.10 g) were placed in solvent-resistant screw-cap tubes containing 0.1 mm zirconia/silica beads (BioSpec Products 11079101z) and 1 large stainless steel bead (BioSpec Products 11079132ss ...
-
bioRxiv - Microbiology 2020Quote: ... and 500 μL of PBS for 3 min using a mini-BeadBeater (BioSpec products, Bartlesville, OK). Afterward ...
-
bioRxiv - Microbiology 2020Quote: ... in a reinforced sterile microvial (330 TX) preloaded with 0.3 g of 0.1 mm zirconia/silica beads (1107910z, both BioSpec Products, Inc., Bartlesville, OK). The lysis tubes were subjected to bead beating in a FastPrep-24 homogenizer (MP Biomedicals ...
-
bioRxiv - Microbiology 2020Quote: ... The insect abdomens or the whole insects were put into a special EP tube weighing 0.3 g along with 0.1 mm glass beads (Cat. No. 11079101, BioSpec, Oklahoma City, OK, USA). DNA extraction was done according to the QIAamp® Fast DNA Stool Mini Kit (Cat ...
-
bioRxiv - Microbiology 2024Quote: ... cecal contents were weighed and transferred to tubes containing 1.2 g of zirconia-silicate beads (Cat. No. 11079101z, BioSpec Products, Bartlesville, OK). Cecal contents were homogenized using a bullet blender and a vortex in 1 mL of 0.5% phosphoric acid per 100 mg of sample ...
-
bioRxiv - Microbiology 2021Quote: ... 250 mM NaCl) for 3 min using 3.2-mm stainless steel beads and a Mini-Beadbeater (BioSpec). The samples were centrifuged (21,000 rcf ...
-
bioRxiv - Neuroscience 2021Quote: ... scanner with an actively shielded 6-cm diameter gradient operating with a maximum strength of 100 G/cm and a rise time of 110 μs (Bruker BioSpec, Billerica, MA, USA). A 15 mm ID customized surface coil for radiofrequency (RF ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... whole lung tissue was placed into BioStor™ Vials with screw caps (National Scientific Supply, Claremont, CA, USA) with 3.5 g of zirconia/silica beads (BioSpec Products, Bartlesville, OK, USA). The tissue was homogenized at 4,800 rpm for 20 seconds.
-
bioRxiv - Biophysics 2023Quote: ... 10 μg/ml DNAse I and lysed using a BeadBeater (BioSpec). The lysate was then clarified by centrifugation and passed over a Ni2+-chelating column ...
-
bioRxiv - Cell Biology 2020Quote: ... Lysis was performed by bead beating (0.5 mL of 3 μM glass beads in a Mini-BeadBeater-16 (BioSpec), 6 cycles of 30 seconds each with a one-minute ice incubation between bead-beating cycle) ...
-
bioRxiv - Cancer Biology 2022Quote: ... and tumor tissues were placed in cold saline for rapid dissection (>3 min) and immediately frozen using a liquid-nitrogen-cooled Biosqueezer (Biospec Products). The tissue was weighed (10–15 mg ...
-
bioRxiv - Microbiology 2023Quote: ... samples were thawed on ice and split into 3 bead beating tubes containing 0.5 ml 0.1 mm zirconium-silica beads (BioSpec Products, Bartlesville, OK, USA). Samples were disrupted in seven (1 min ...
-
bioRxiv - Genomics 2024Quote: ... Mosquito samples were mechanically homogenised for two 3-minute cycles at 1,500 rpm using a Mini Beadbeater-96 (BioSpec Products, Bartlesville, USA) and centrifuged for two 5-minute cycles at 14,000 rpm ...
-
bioRxiv - Pathology 2020Quote: ... then agitating for 10 seconds in a Mini-BeadBeater-16 (BioSpec, Bartlesville, OK, USA). The homogenates were then centrifuged for 10 seconds in a bench top centrifuge (Eppendorf ...
-
bioRxiv - Genetics 2024Quote: ... Two 3 mm stainless steel beads were added to the tubes containing insect legs and homogenized using a bead beater (Biospec Products, Bartlesville, OK) for 1 min at the highest speed ...
-
bioRxiv - Zoology 2024Quote: ... 15 ml Fetal Calf Serum (FCS) 3% and 5ml Amphotericin B) and 500ml of Zirconia beads (Firma Biospec: 2.0 mm, Cat. No 1107912). The contents were macerated using the Qiagen Tissuelyser LT for 10 min and then centrifuged at 4,500 x g for 15 min ...
-
bioRxiv - Microbiology 2021Quote: ... 50 μL of 500 μm RNAse-free glass beads was added and the cell suspension was ground in 3 cycles of 30 sec using a BioSpec Mini-Beadbeater-16 (Biospec Products Inc., Bartlesville, OK, USA). The cell lysate was centrifuged to remove cell debris and the crude RNA extract collected from the supernatant ...
-
bioRxiv - Microbiology 2021Quote: ... mixed with 1 mL of 0.005 M NaOH containing 10 μg/mL caproic acid-6,6,6-d3 (internal standard) and 1.0 mm diameter zirconia/silica beads (BioSpec, Bartlesville, OK). The mixture was thoroughly homogenized and centrifuged (13,200 g ...
-
bioRxiv - Microbiology 2024Quote: ... followed by the addition of 10 µl proteinase K and sterile zirconia beads (1.0 mm, 20-30; BioSpec, Inc., USA). For thorough mixing ...