Labshake search
Citations for Promega :
551 - 600 of 1954 citations for 3 4 Ethoxy 3 methoxy phenyl 3 thiophene 2 carbonyl amino propionic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2021Quote: ... on a 3.5 cm glass-based dish were transfected with 1.0 μg of EBFP (plasmid DNA) using 3 μL of FuGENE HD Transfection Reagent (Promega) in 10 μL of Opti-MEM (Life Technologies Corporation) ...
-
bioRxiv - Microbiology 2021Quote: ... and NS1 (3′) sequences were determined from purified product cloned into the pGEM-T vector by TA-cloning (Promega) according to the manufacturer’s guidelines.
-
bioRxiv - Microbiology 2020Quote: ... pH 8.0 using Vivaspin columns (3 kDa) and digested separately overnight using trypsin or chymotrypsin (Mass Spectrometry Grade, Promega) at a ratio of 1:30 (w/w) ...
-
bioRxiv - Cell Biology 2021Quote: ... Alkylation was quenched by the addition of 3 mM DTT and proteins were digested overnight at 37°C with 1 μg trypsin (0.5 μg/μl; Promega). Following digestion ...
-
bioRxiv - Biophysics 2022Quote: ... DTT was added to a final concentration of 3 mM before adding 1 μg of sequencing-grade trypsin (Promega) and incubating at 37 °C overnight ...
-
bioRxiv - Microbiology 2022Quote: ... 20 μL of cells were mixed with 20 μL of the CellTiter-Glo 2.0 Cell Viability Reagent or Caspase-Glo 3/7 Assay substrate (Promega). Luminescence was measured after 2 min incubation for CellTiter-Glo 2.0 or 30 min incubation for Caspase-Glo 3/7 Assay using the Synergy H1 microplate reader as above ...
-
bioRxiv - Microbiology 2024Quote: ... Cells were then transfected with plasmid DNA (4µg per plasmid per flask) using FuGENE HD (1:3 ratio; Promega) and cultured at 28°C.
-
bioRxiv - Molecular Biology 2024Quote: ... RT-PCR was used to amplify the OGDH 3’UTR and sub clone it into pmirGLO vector (Promega, UK). 5 × 10^4 C2C12 cells were seeded into 12 well plates ...
-
bioRxiv - Molecular Biology 2023Quote: ... Lysates were diluted 10-fold with 25 mM ammonium bicarbonate and digested with 3 µg of trypsin (Promega, v5111) overnight at 37°C ...
-
bioRxiv - Microbiology 2023Quote: ... Imaging was performed 3 min after intraperitoneal (i.p.) injection of 150 mg/kg D-Luciferin (Beetle Luciferin Potassium Salt, Promega) in the IVIS® Spectrum In Vivo Imaging System under 2.5% isoflurane inhalation anesthesia using 15 min exposure ...
-
bioRxiv - Molecular Biology 2023Quote: ... After 3 days the cells were washed with PBS and lysed with Cell Culture Lysis Buffer (Promega cat. #E1531) prior to firefly and Renilla luciferase activity measurements which were performed in triplicate using the Dual-GLO kit (Promega cat ...
-
bioRxiv - Cancer Biology 2023Quote: ... 170 µL medium was removed and 30 µL caspase 3/7 reaction (1:100 Z-DEVD-R110 fluorogenic substrate:Homogenous buffer; ApoONE, Promega) was added to each well ...
-
bioRxiv - Cell Biology 2023Quote: ... Samples were diluted 3 fold with 20mM HEPES pH 8.0 and digested in 10 @g ml-1 trypsin-TPCK (Promega) overnight at room temperature ...
-
bioRxiv - Cancer Biology 2023Quote: The 3-dimensional (3D) culture studies were performed using MCF-7 cells and low melting point agarose (Promega, Australia). Agarose was suspended in PBS at a concentration of 0.75% (w/v) ...
-
bioRxiv - Cell Biology 2023Quote: ... and 500 ng of lenti-viral transfer plasmids previously described along with 3 µl of Fugene 6 (E2692, Promega) transfection reagent ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Probe synthesis reactions were performed at 37 °C for 3 h and then were treated with DNase I (Promega) at 37 °C for 20 min ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... CytoTox-OneTM homogeneous membrane integrity assay kit and Caspase-Glo® 3/7 assay system kit were from Promega, WI ...
-
bioRxiv - Genomics 2023Quote: ... at 0.5 uM or DMSO (vehicle) followed by measurement of Caspase activity via the Caspase-Glo 3/7 assay (Promega). Results are representative of at least 3 independent experiments ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... CP4 medium was exchanged with Hanks’Balanced Salt Solution (with added glucose 1 g/l, NaHCO3 0.35 g/l) containing GloSensor cAMP Reagent (3 %, Promega) and plates were incubated for 60 min ...
-
bioRxiv - Molecular Biology 2024Quote: ... The coding sequence of NanoLuc was amplified by PCR using the primers 5-NanoL and 3-NanoL from pNL1.1.CMV plasmid (Promega). The resulting fragment was digested with BamHI and NotI enzymes and cloned into pEGFP-N1 digested with the same enzymes ...
-
bioRxiv - Cancer Biology 2024Quote: ... A similar assay format was used to measure apoptosis with the Caspase-Glo® 3/7 3D Assay (Promega). Cells were seeded and treated as described above for 72 h ...
-
bioRxiv - Cancer Biology 2024Quote: ... Transfection solutions were made at a lipid (µg) to plasmid (µL) ratio of 3:1 using FuGene 6 (Promega) as the transfection reagent ...
-
bioRxiv - Molecular Biology 2024Quote: ... and transfected with 0.5 μg of “driver” plasmid + 0.5 μg of SVA “reporter” plasmid (pAD26) using 3 μL FuGENE® HD (Promega); the following day ...
-
bioRxiv - Molecular Biology 2024Quote: ... HeLa cells were co-transfected with 0.5 μg of “driver” plasmid (pTMO2F3) + 0.5 μg of pAluneoTet using 3 μL FuGENE® HD (Promega); the following day ...
-
bioRxiv - Cancer Biology 2024Quote: Purified rRNA (1 to 3 µg) was digested overnight at 37 °C with 270 units of Nuclease S1 (Promega) using the supplied buffer ...
-
bioRxiv - Immunology 2024Quote: ... and 1μg of plasmid expressing the respective spike protein using a 3:1 ratio of Fugene HD transfection agent (Promega).28,49 After 48 hours of incubation at 10% CO2 ...
-
bioRxiv - Cell Biology 2024Quote: ... Cells were seeded onto acid-washed coverslips at a density of 3 × 104 cells per coverslip for 24 h before transfection with 1μg of plasmid DNA using 3 μl Fugene HD transfection reagent (Promega). HaloTagged AP-2 σ2 was visualized by adding Janelia Fluor 646-HaloTag ligand (Promega) ...
-
bioRxiv - Cancer Biology 2024Quote: ... 24hr and 48 hr by addition of the Caspase-Glo 3/7 reagent according to the manufacturer’s protocol (Promega). Luminescence was detected by a microplate reader (TECAN) ...
-
bioRxiv - Cancer Biology 2024Quote: ... plates were equilibrated to room temperature and 100 μL of room temperature Caspase-Glo 3/7 reagent (Promega G8091) was added to each well ...
-
bioRxiv - Cancer Biology 2022Quote: The sequence encoding RARα LBD (amino acids 176-421) was cloned into pBIND vector (Promega E245A) to generate pBIND-RARα LBD ...
-
bioRxiv - Molecular Biology 2024Quote: 6.5 µl of translation-competent extracts were freshly supplemented with 0.4 mM amino acids (L4461, Promega), 15 mM HEPES pH 7.3 ...
-
bioRxiv - Molecular Biology 2021Quote: ... Mtfp1 and Gnpat 3’UTRs and Tnksbp1 and Gnpat CDS were amplified by PCR from MIN6 cDNA and subcloned into pmirGLO (Promega), downstream the Firefly ORF ...
-
bioRxiv - Developmental Biology 2020Quote: ... and ‘TA cloned’ (after addition of 3’ adenine nucleotide overhangs) it into pGEM®-T-Easy plasmid vector (Promega, A1360). The derived plasmid was mutagenised (commercial service ...
-
bioRxiv - Biochemistry 2022Quote: HeLa and HEK293T cells were seeded on 18 mm glass coverslips at a density of 3×105 cells/mL and were transfected with FuGENE 6 (Promega) transfection reagent 24 h later ...
-
bioRxiv - Neuroscience 2021Quote: ... reverse mutant primer oIMR1437 5′-TCC ACC TAG CCT GCC TGT AC-3′) with 1U GoTaq polymerase (Promega, Madison, USA), 1X green GoTaq buffer ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 μL RRV-P3 plasmid or 3 μL of cDNA from rose tissue or nuclease-free water (Promega, Madison, WI). The final volume of the LAMP reaction was 25 μL.
-
bioRxiv - Molecular Biology 2021Quote: RNA extraction from liver tissue (n=3-6 biological replicates per group) was performed using the ReliaPrep RNA Miniprep system (Promega), as per manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2020Quote: The non-TOP 5′ UTR sequence of ATP5O (5′-CGGGAGAAG-3′) was identified in published nanoCAGE data 90 and inserted between the T7 promoter and Renilla luciferase in psiCHECK2 (Promega) by Gibson Assembly.
-
bioRxiv - Immunology 2021Quote: ... JEG-3 viability after 1 h salubrinal pretreatment followed by 48 h ZIKV infection was measured by CellTiter-Glo Assay (Promega) following the manufacturer’s instructions ...
-
bioRxiv - Biochemistry 2021Quote: ... Genomic regions flanking the CRISPR target sites were PCR amplified with designed primers (Supplemental Table 3) using GoTaq DNA polymerase (Promega) and sent for Sanger sequencing to determine the insertion and deletion errors generated by CRISPR-Cas9 system in exon 2 of PARKIN ...
-
bioRxiv - Cell Biology 2021Quote: ... The cells were then washed three times with 1 × PBS and blocked with 3% Blot-Qualified bovine serum albumin (BSA, Promega) in 1 × PBS containing 0.05% Tween-20 (TPBS ...
-
bioRxiv - Biochemistry 2020Quote: ... protein was modified with an poly(A)25 insertion at the 3’ end of the gene within the pRL-null vector (Promega). The gene encoding the NanoLuc luciferase was transferred from the pNL1.1 vector (Promega ...
-
bioRxiv - Biochemistry 2020Quote: ... The membrane was probed with a 400 bp 32P-labelled PCR product of the TbCls 3’UTR generated with the prime-a-gene labelling system (Promega). Primers used for PCR were ...
-
bioRxiv - Bioengineering 2020Quote: ... Reverse transcription into cDNA was done from 3 μg of RNA by using 500 μg/mL random hexamers (Promega, Switzerland) and 0.5 μL of 200 UI/mL SuperScript III reverse transcriptase (Invitrogen) ...
-
bioRxiv - Neuroscience 2020Quote: Caspase 3/7 activity in primary neuronal cells was measured using ApoTox-Glo Triplex Assay kit (Promega, Madison, WI, USA) as per the manufacture’s instruction ...
-
bioRxiv - Cancer Biology 2020Quote: ... The viability of cells was measured after 3 days incubation using a CellTiter-Glo Luminescent Cell Viability Assay kit (Promega) following the manufacturer’s protocol ...
-
bioRxiv - Cell Biology 2021Quote: ... To remove unwanted 3’phosphate groups from bound RNA fragments in both CLASH and FLASH the complexes were treated with TSAP phosphatase (Promega) using provided buffer for 40 min at room temperature ...
-
bioRxiv - Microbiology 2020Quote: Huh7.5.1 cells were treated with different concentrations of RG7834 for 3 days and viability was measured using Cell Titer Glo (Promega) according to the manufacturer’s instructions.
-
bioRxiv - Microbiology 2020Quote: Apoptosis induction by T3DC and inhibition by Z-VAD-FMK was determined using the Caspase-Glo 3/7 Assay System (Promega). PC3 cells were plated at 1 × 104 cells per 96 well plate and 24 h later were either treated with docetaxel ...
-
bioRxiv - Microbiology 2021Quote: ... Cell viability was assessed 3 days postinfection by MTS assay using a Cell Titer 96 aqueous cell proliferation kit (Promega) or Viral ToxGlo™ (ToxGlo assay) ...