Labshake search
Citations for Biotek :
101 - 144 of 144 citations for Pemetrexed disodium Impurity 30 since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2022Quote: ... Brightfield and GFP images were taken every 3 hours for 30 hours using the Cytation 5 Cell Imaging Multi-Mode Reader (BioTek Instruments). GFP quantification was performed by a Cell Profiler program (https://cellprofiler.org/) ...
-
bioRxiv - Genetics 2022Quote: ... Brightfield and RFP-channel images were taken every 30 minutes for 12 hours using the Cytation 5 Cell Imaging Multi-Mode Reader (BioTek Instruments). Fluorescence quantifications and the counting of fraction of dead worms were performed by a Cell Profiler program ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... Absorbance at 405 nm was measured every two minutes for 30 minutes on a Synergy H1 hybrid reader (BioTek, Winooski, VT). AChE activity was normalized to total protein concentration of each sample as determined by a BCA assay (Pierce ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were then incubated for 30 min in 1X PrestoBlue® reagent and absorbance was measured at 570 nm and 600 nm (reference wavelength) (BioTek instruments ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plate was incubated for 30 min at 22 °C and the luminescent signal was measured in a Cytation™ 3 (BioTek) multifunctional microplate reader ...
-
bioRxiv - Microbiology 2023Quote: ... transferred to a 96-well plate and incubated at 30°C with double-orbital shaking at 355 cpm in an Epoch 2 microplate reader (BioTek, Germany). Growth was monitored by measuring the OD600 at 10-min intervals until the stationary phase was reached ...
-
bioRxiv - Microbiology 2024Quote: ... OD600 reads were taken every 30 minutes for 24 hours using a plate reader (Synergy H1 Microplate Reader, BioTek Instruments, USA). MIC values were determined by the minimal concentration in which there was no significant bacterial growth ...
-
bioRxiv - Microbiology 2024Quote: ... Growth was monitored for 40 h by measuring OD600 every 15 or 30 minutes under constant linear shaking using Synergy H1 Plate Reader (BioTek Instruments). Raw OD600 growth data were exported using Gen5 software (BioTek Instruments ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The cells were then transferred to 96-well microtiter plates and incubated at 30°C in a plate reader (Synergy H1, BioTek Instruments). The fluorescence of msfGFP was monitored using an excitation wavelength (λexcitation ...
-
bioRxiv - Cancer Biology 2024Quote: ... Samples were incubated at 37 °C for 30 min and the absorbance was measured at 562 nm using a microplate spectrophotometer (BioTek, Epoch). Protein yield was determined by multiplying the protein concentration with the volume of cell lysate.
-
bioRxiv - Cell Biology 2024Quote: ... Samples were incubated at 37 °C for 30 min and the absorbance was measured at 562 nm using a microplate spectrophotometer (BioTek, Epoch). Protein yield was determined by multiplying the protein concentration (µg/µL ...
-
bioRxiv - Cell Biology 2024Quote: ... every 30 seconds for at least 15 minutes at 37°C using Synergy H1 Hybrid Multi-Mode Microplate Reader (BioTek Instruments). Measurements obtained from pyrene-actin assay for each condition were baseline corrected using the average fluorescence value of pyrene-actin in 1x Monomix buffer ...
-
bioRxiv - Molecular Biology 2021Quote: ... The reaction was incubated for 15 min at 30°C and the absorbance was measured at 340 nm using a microplate spectrophotometer (BioTek®Synergy).
-
bioRxiv - Synthetic Biology 2020Quote: ... Growth was monitored by measuring the OD values every 30 min using a microplate reader (Biotek Synergy MX, Biotek Instruments, Colmar, France). For each strain and set of conditions ...
-
bioRxiv - Microbiology 2021Quote: ... The OD600 was used to monitor growth during incubation at 30 °C for 48 h without aeration using a Synergy 2 microplate reader (Biotek, Winooski, VT).
-
bioRxiv - Microbiology 2021Quote: ... Growth curves were followed over 48 h at 30°C by optical density readings every 15 min using a Synergy H1 Plate Reader (Biotek, Winooskim VT) with Gen5 Microplate Reader and Imager Software (Biotek ...
-
bioRxiv - Microbiology 2020Quote: ... Serosal samples were collected every 30 minutes for 2 hours with FITC dextran flux (ng/ml/cm2/hr) determined by plate reader (Biotek Synergy H1).
-
bioRxiv - Microbiology 2022Quote: ... pH 7.2 at 30 °C) prewarmed to 30 °C and the absorbance at 340 nm was measured immediately using a microplate reader (SynergyMx, BioTek, VT, USA) for 1 h ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... The O.D./min was continuously recorded at 405 nm over 30 min to measure the hydrolytic product 5-mercapto-2-nitrobenzoic acid using a Synergy H1 microplate reader (Biotek; VT, USA). O.D./min was converted to catalytic rate using the Beer-Lambert law:
-
bioRxiv - Immunology 2023Quote: ... This was achieved by collecting samples from the serosal compartments every 30 minutes for 2 hours and measuring the respective FITC concentrations on a plate reader (Synergy H1; BioTek, Winooski, VT). Samples with visible FITC leakage in the serosal compartment were omitted ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The absorbance at 405 nm was measured every 1 min for at least 30 min and up to 2 h using a Synergy 4 microplate reader (Biotek, Winooski, VT). SEAP activities were calculated as a function of the increase in absorbance at 405 nm over time42.
-
bioRxiv - Genetics 2023Quote: ... The plates were sealed with clear plastic adhesive film and incubated at 30°C with no shaking in a microplate spectrophotometer (BioTek Epoch 2) with OD600 readings taken of each well every 30 minutes for 48 hours ...
-
bioRxiv - Cell Biology 2024Quote: ... The diluted cultures were then aliquoted into a 96-well plate and incubated at 30°C with single orbital shaking in a Cytation3 plate reader (BioTek, Winooski, VT). The OD600 was measured every 5 minutes for 24 hours and doubling time calculated by fitting an exponential growth curve to the data.
-
bioRxiv - Microbiology 2024Quote: ... OD660 nm was recorded every 10 min for 24 h at 30 °C under continuous shaking in an Epoch 2 absorbance reader (Biotek Instruments Inc.). When required ...
-
bioRxiv - Bioengineering 2024Quote: ... and absorbance at 492 nm was monitored in one-minute kinetic interval cycles for 30 minutes using a plate reader (Biotek Cytation 5). The experiment was repeated for the samples after fabrication and biweekly upon storage in physiological conditions ...
-
bioRxiv - Microbiology 2020Quote: At least three replicates per strain and growth condition were grown in 200 μl of LB alone or supplemented with canavanine in a 96-well plate at 30°C with 140 rpm shaking in a BioTek Eon Microplate Spectrophotometer (BioTek, Winooski, VT, USA). The A600 was measured at 10 minutes intervals ...
-
bioRxiv - Microbiology 2020Quote: ... Em = 450 nm) over a period of 30-60 minutes at 37°C on a Cytation-3 imaging reader (BioTek, Winooski, VT, USA). Concentrations of hydrolyzed products were determined using a standard concentration curve (unconjugated 4MU) ...
-
bioRxiv - Genetics 2020Quote: ... 10 μl of ligand was added to each well and luminescence measurements were recorded immediately for 30 min at 1-min intervals (Synergy H1 Hybrid Multi-Mode Reader, BioTek, Winooski, VT, USA).
-
bioRxiv - Physiology 2023Quote: ... Growth was assayed by measuring OD600 at intervals of 30 minutes for 48–72 hours on plate readers (Biotek Instruments Inc., VT, USA). Cultures were incubated at 37°C and at 237 cpm ...
-
bioRxiv - Immunology 2023Quote: ... Bacteria were fixed with 0.5% formaldehyde at RT for 30 min and then wells were washed twice with a washer dispenser (BioTek EL406, Agilent Technologies, US) with PBS ...
-
bioRxiv - Microbiology 2023Quote: ... All endpoint assays and growth curves were carried out at 30°C and 548 rpm using a Synergy HTX plate reader (BioTek, Winooski, VT, USA) with OD600 readings measured every 30 minutes ...
-
bioRxiv - Molecular Biology 2023Quote: ... and consumption of NADPH was measured by continuously monitoring absorbance at 340 nm over 30 minutes using an EpochTM Microplate Spectrophotometer (Biotek, Winooski, VT, USA). Initial reaction rates were determined from linear fits of the absorbance versus time corrected for blank ...
-
bioRxiv - Biochemistry 2023Quote: ... plates were shaking for 30 min and the absorbance was measured at 570 nm in a multiwell plate reader Synergy H1 Hybrid Reader (Biotek Instruments Inc., USA).
-
bioRxiv - Microbiology 2023Quote: ... were statically incubated at 30 °C for 48h and biofilm measurements were done as previously reported (41) using a Cytation5 plate reader (BioTek, Winooski, VT, USA). The experiment was replicated three times in total with 36 technical replicates each ...
-
bioRxiv - Microbiology 2020Quote: ... and plates were incubated at stationary position in 30°C or 37°C for 24 hours in Synergy™ plate reader (BioTek, Winooski, VT, USA) with 550 and 600 nm absorbance readings taken every 15 minutes.
-
bioRxiv - Physiology 2020Quote: ... Absorption at 340 nm was measured from each standard and recorded every minute over a 30 minute period in a microplate spectrophotometer (BioTek Epoch; Vermont, United States). Solution A was only used if a negative linear relationship between the final optical density (OD ...
-
bioRxiv - Systems Biology 2022Quote: ... The fluorogenic substrate provided with the kit was added and the plate was read for 30 minutes using a fluorometer (Biotek Synergy H1 microplate reader) at Ex:380/EM:460 nm.
-
bioRxiv - Microbiology 2023Quote: ... Bacteria were then grown for 24 h at 30°C under continuous shaking in an Epoch 2 Microplate Spectrophotometer from BioTek (Santa Clara, CA, USA). The absorbance at O.D.660 nm was measured every 10 min.
-
bioRxiv - Microbiology 2023Quote: Optical density of the microplates is measured at 600 nm (OD600) over 72 hours at an interval of 30 mins using Epoch 2 Microplate Spectrophotometer (BioTek Instruments, Inc., Winooski, VT) with the Corning® 96-well clear flat bottom polystyrene microplate #3370 ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The absorbance at 340 nm (A340) was monitored in 50 s-intervals at 30°C in an EPOCH2 microplate reader (BioTek Instruments, Winooski, VT, USA). Enzymatic activities were determined by comparison with the corresponding blank experiments ...
-
bioRxiv - Microbiology 2024Quote: ... The extracted RNA was re-suspended in 30 μl RNase-free water then quantified with a BioTek Synergy™2 Multi-detection Microplate Reader (BioTek Instruments, Winooski, VT) and agarose gel electrophoresis ...
-
bioRxiv - Cell Biology 2024Quote: ... The fluorogenic substrate provided with the kit was added and the plate was read for 30 mins using a fluorometer (Biotek Synergy H1 microplate reader) at Ex:380/EM:460 nm ...
-
bioRxiv - Bioengineering 2024Quote: ... The well plate was incubated at 37°C for 30 minutes and absorbance was measured at 562 nm on a Synergy H1 microplate reader (BioTek Instruments, Winooski, VT, USA). DF-1 and MsNACs were imaged via light microscope at 40x and subsequently analyzed for area and diameter using ImageJ.
-
bioRxiv - Microbiology 2021Quote: The lactobacilli growth rate analysis was performed at 30 and 37°C, under agitation (double orbital, fast mode) in Synergy H1 plate readers (Biotek Instruments, Inc. Winooski, VT, USA). OD was measured every 30 minutes for 24h ...