Labshake search
Citations for Sutter Instruments :
351 - 400 of 475 citations for L Aspartic Acid N T Boc B Bz Ester 13C4 97 99%; 15N 97 99% since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2020Quote: Micropipettes were pulled from borosilicate glass capillaries (outer diameter of 1mm and an inner diameter of 0.5mm) using a pipette puller (model P-97; Sutter Instruments). After pulling ...
-
bioRxiv - Bioengineering 2022Quote: The microinjection protocol that was used was adapted from Cosma and colleagues.95 A pipette puller (P-97, Sutter Instruments) was used to prepare the borosilicate needles (GC100T-10 ...
-
bioRxiv - Bioengineering 2022Quote: ... The glass micropipette has a 50 µm tip and was generated by a Micropipette Puller (P-97, Sutter Instrument Co.). After injection ...
-
bioRxiv - Neuroscience 2019Quote: ... Glass pipettes were formed from Sutter glass (BF150-110) on a Sutter P-97 electrode puller (Sutter Instruments, Novato, CA). The pipettes were filled with 1 of 3 different patch pipette solutions ...
-
bioRxiv - Molecular Biology 2019Quote: ... Recording electrodes were fabricated from borosilicate capillary glass (0.86 OD) with a Flaming micropipette puller (Model P-97, Sutter Instruments) and polished (polisher from World Precision Instruments ...
-
bioRxiv - Neuroscience 2021Quote: ... to a tip resistance of 3-4MOhms with a P-97 Flaming/Brown type micropipette puller (Sutter Instruments, Atlanta, Georgia).
-
bioRxiv - Neuroscience 2022Quote: ... Recording electrodes were prepared by pulling borosilicate capillary tubes with a P-97 Flaming/Brown micropipette puller (Sutter Instrument Co) to a tip resistance of 2-6 MΩ and were then back-filled with aCSF ...
-
bioRxiv - Neuroscience 2022Quote: ... The patch pipettes with resistance 3-5 MΩ were pulled by the pipette puller (Sutter Instrument Co., Model P-97). To measure spontaneous action potential (sAP) ...
-
bioRxiv - Neuroscience 2023Quote: Pipettes with resistance of 3.5-6 MΩ were fabricated from borosilicate filamented capillaries using the P-97 micropipette puller (Sutter Instrument). The pipettes were filled with an internal solution composed of 8mM NaCl ...
-
bioRxiv - Neuroscience 2022Quote: ... Warner Instruments) and pulled to 1-1.5 μm tip diameter using a Flaming Brown P-97 pipette puller (Sutter Instruments), such that their resistance when backfilled with external solution was approximately 7-10 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... A borosilicate-glass recording electrode filled with recording ACSF (1–2 MΩ ; Model P-97, Sutter Instruments, Novato, CA, USA) was placed in the stratum radiatum area to record field excitatory postsynaptic potentials (fEPSPs ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... Patch pipettes (4-7 MΩ) were pulled from thin wall borosilicate glass using a micropipette puller (P-97, Sutter Instruments) and filled with a K-Gluconate based intra-pipette solution containing ...
-
bioRxiv - Molecular Biology 2023Quote: Electrophysiological recordings were performed in the inside-out patch clamp configuration with patch pipettes (1–2 μm tip opening) pulled from 1.5 mm borosilicate glass capillaries (Zeitz-Instruments GmbH) using micropipette puller P 97 (Sutter Instruments). The tips were polished to have a pipette resistance of 2–4 MΩ in the bath solution ...
-
bioRxiv - Neuroscience 2023Quote: ... Borosilicate glass recording electrodes were pulled with either a Narishige or Sutter P-97 Flaming/Brown electrode puller (Sutter Instruments) with a resistance of 2.5-4.0MΩ ...
-
bioRxiv - Neuroscience 2023Quote: For virus injections, borosilicate glass capillaries (cat. no. 1408472, Hilgenberg) were pulled on a P-97 micropipette puller (Sutter Instruments), broken to a tip diameter of Ø40–50 µm ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording pipettes were pulled from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Cancer Biology 2024Quote: ... Recording pipettes were generated from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and were filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes with a tip resistance of 4–7MΩ were pulled with a flaming-Brown puller P-97 (Sutter Instruments) from borosilicate glass capillaries (Sutter Instruments ...
-
bioRxiv - Neuroscience 2023Quote: ... to a resistance of 2–4 MΩ using a horizontal puller (P-97 or P-1000; Sutter Instruments, Novato, CA). In most experiments ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes were made from borosilicate glass with a Flaming-Brown puller (P-97, Sutter Instruments; tip resistance 5-10 MΩ). The pipette solution contained (in mM ...
-
bioRxiv - Neuroscience 2021Quote: ... Somatic whole-cell patch-clamp recordings were performed using pipettes pulled from borosilicate glass capillaries (2 mm outer/1 mm inner diameter) on a horizontal puller (P-97, Sutter Instrument). The pipettes were filled with an intracellular solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... We used a 3-5 MΩ glass patch pipettes (capillary tubing with 1.5/0.75 mm OD/ID) that were pulled on a P-97 Flaming/Brown type micropipette puller (Sutter Instrument Company, USA). The pipette solution contained 120mM K-aspartate ...
-
bioRxiv - Neuroscience 2021Quote: ... Borosilicate glass pipettes with a tip resistance of 3–4 MΩ (G150F-4, Warner Instruments) were pulled on a P-97 Flaming-Brown micropipette puller (Sutter Instruments) and filled with an internal solution containing ...
-
bioRxiv - Neuroscience 2020Quote: ... Whole-cell patch clamp recordings were obtained using thin-walled borosilicate glass microelectrodes (Warner) pulled to a tip resistance of 3-5 MΩ pulled using a P-97 Flaming/Brown Micropipette Puller (Sutter Instrument). Electrodes were filled with an intracellular recording solution containing (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... pulled from borosilicate glass tubes with 2.0 mm outer diameter and 0.5 mm wall thickness (Hilgenberg, Malsfeld, Germany; Flaming-Brown P-97 puller, Sutter Instruments, Novato, USA). Current-clamp recordings of newborn granule cells were conducted using glass with 0.7 mm wall thickness with higher pipette resistances (6-12MΩ ...
-
Pax6 loss alters the morphological and electrophysiological development of mouse prethalamic neuronsbioRxiv - Developmental Biology 2021Quote: ... Recording pipettes were pulled from borosilicate glass capillaries (Havard Apparatus, 30-0060) on a horizontal electrode puller (P-97, Sutter Instruments) to a tip resistance of 4-6 MΩ ...
-
bioRxiv - Neuroscience 2020Quote: ... Pipettes pulled from borosilicate glass capillary tubes (cat. no. G85150T-4, Warner Instruments) using a P-97 pipette puller (Sutter Instrument) were filled with the following intracellular solution (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: ... all electrodes used in any experiment in this study were made at the same time using a p-97 micropipette puller (Sutter Instruments) before data collection ...
-
bioRxiv - Neuroscience 2022Quote: ... Micropipettes (2-4 MΩ) were pulled from borosilicate capillaries (Science Products GmbH) with a P-97 Flaming/Brown Micropipette Puller (Sutter Instruments). The cell capacitance and series resistance were always compensated (up to 75%).
-
bioRxiv - Neuroscience 2019Quote: ... The injection electrodes (Science Products, GB100TF-8P) were pulled with a Flaming/Brown micropipette puller (Sutter Instruments Co., Model P-97) and broken individually ...
-
bioRxiv - Neuroscience 2021Quote: Patch pipettes were fabricated from thick-walled borosilicate glass capillaries (outer diameter: 2 mm, inner diameter: 1 mm) with a horizontal pipette puller (P-97, Sutter Instruments). The intracellular solution for soma-dendritic whole-cell recordings contained 120 mM K-gluconate ...
-
bioRxiv - Neuroscience 2020Quote: Recordings of extracellular field potentials in the pyramidal layer of CA3a region of hippocampus were obtained using glass micropipettes (15 MΩ pulled on a P-97, Sutter instruments) field with ACSF ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch-pipettes (5–13 MΩ) were made from borosilicate glass capillary with a Flaming-Brown puller (P-1000 or P-97; Sutter Instrument) and polished with a microforge ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording pipettes were pulled from borosilicate capillary glass (Havard Apparatus, 30-0060) on a horizontal electrode puller (P-97, Sutter Instruments) to a tip resistance of 4-6 MΩ and filled with K-gluconate-based internal solution (in mM ...
-
bioRxiv - Neuroscience 2019Quote: ... glass electrodes were pulled out of micropipettes (GB120F-10) with a glass puller (P-97 Flaming/Brown type micropipette puller; Sutter instruments). The electrodes were filled with a solution of potassium chloride (3 mol/l ...
-
bioRxiv - Neuroscience 2020Quote: ... Only virus transduced mice identified by their fluorescence upon excitation with a 572 nm LED (Cairn Research) were recorded using patch pipettes of 5–10 MΩ (P-97 Flaming/Brown puller, Sutter Instruments) containing intracellular solution (in mM) ...
-
bioRxiv - Neuroscience 2019Quote: ... Recording electrodes were generated from thin-walled capillary tubing (Warner Instruments) using a horizontal pipette puller (P-97 Flaming/Brown Micropipette Puller, Sutter Instruments), resulting in a resistance of 1-3 MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... were pulled from borosilicate glass with an outer diameter of 1.5 mm using a P-97 micropipette puller (Sutter Instruments, USA) and filled with a solution containing 140 mM K-gluconic acid ...
-
bioRxiv - Developmental Biology 2022Quote: ... without inner filament) were designed using a custom-made program in a horizontal filament puller (P-97 Micropipette Puller, Sutter Instrument). Reduced cone angle and slender taper can be achieved using a 2-loop puller program.
-
bioRxiv - Neuroscience 2022Quote: Borosilicate glass pipettes (with a tip diameter of 5 μm and resistance of 1 MΩ when filled with ACSF) were fabricated on a micropipette puller (P-97 Flaming/Brown, Sutter Instruments), backfilled with 100-250 mM CaCl2 and placed into a pipette holder mounted on a motorized micromanipulator with a closed pressure system connected to a 1 mL syringe ...
-
bioRxiv - Microbiology 2022Quote: ... Glass needles were made by pulling a capillary (GB100TF-10, 0.78 × 1.00 × 100 mm; Science Products, Hofheim, Germany) on a P-97 micropipette puller (Sutter Instrument, Novato, California). Tips of the needles were cut with a razor blade ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording pipettes were pulled from soda lime glass pipettes (outer diameter 1.5 mm, Kimble® Chase, #41A2502,) using a P-97 microelectrode puller (Sutter Instrument). Pipettes with resistances of 3–5 MΩ were used for recordings ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes with a 2–3 M tip resistance were fabricated using a three-stage custom program on a Flaming-Brown micropipette puller (P-97, Sutter Instruments) and filled with solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2023Quote: ... The patch pipettes were produced from borosilicate glass capillary tubes (Hilgenberg GmbH) by using a horizontal puller (P-97, Sutter instruments) and filled with an intracellular solution containing K-gluconate 130 mM ...
-
bioRxiv - Neuroscience 2023Quote: Intracellular recordings of the mPFC were obtained in vivo using glass micropipettes pulled on a vertical puller (Narishige PP-830, Tokyo, Japan) from borosilicate capillary tubes (WPI; P-97, Sutter Instrument) and filled with 3 M potassium acetate (DC resistances of 30-60 MΩ) ...
-
bioRxiv - Developmental Biology 2023Quote: ... The fine recording (borosilicate) electrodes with a resistance of 20-25 MΩ were pulled using a P-97 micropipette puller (Sutter Instruments) and back-filled with 3M KCl ...
-
bioRxiv - Neuroscience 2023Quote: ... and monopolar stimulator pipettes (3 – 4 MΩ) were obtained from borosilicate glass capillaries with a horizontal pipette puller (P-97, Sutter Instruments). The internal pipette solution contained the following (in mM) ...
-
bioRxiv - Cancer Biology 2023Quote: ... The glass needles necessary for injections were made of borosilicate (GB100T-8P, Science Product) and prepared using a pipette puller (P-97, Sutter Instruments). The needles were connected to a Pneumatic Picopump (WPI) ...
-
bioRxiv - Neuroscience 2024Quote: ... Warner Instruments) were pulled to have resistances of 3-7 MΩ using a Flaming-Brown pipette puller (model P-97; Sutter Instruments). The pipette tip was initially filled with a solution containing (in mM) ...
-
bioRxiv - Bioengineering 2024Quote: ... micropipette electrodes were used for injection of KA or saline and were pulled using an electrode pipette puller (P-97 Flaming/Brown Micropipette Puller, Sutter Instrument) to a taper of 15-20 micrometer (μm ...