Labshake search
Citations for Sutter Instruments :
201 - 250 of 349 citations for 7 Fluoro 6 amino 2H 1 4 benzoxazin 3 4H one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Pathology 2023Quote: ... Recording electrodes (3–5 MΩ) were pulled on a model P-87 micropipette puller (Sutter Instruments, Novato, CA, USA) and polished using a MF-830 MicroForge (Narishige Scientific Instruments Laboratories ...
-
bioRxiv - Neuroscience 2021Quote: ... Fluorescence measurements were performed under whole-field epi-illumination using a DG-4 light source (Sutter Instruments). Signals were detected by a Cool-Snap II HQ CCD camera (Photometrics ...
-
bioRxiv - Cell Biology 2021Quote: ... a NEO sCMOS DC-152Q-C00-FI camera (Andor) and a Lambda DG-4 lamp (Sutter Instruments). Images were acquired using the NIS Elements software (Nikon) ...
-
bioRxiv - Neuroscience 2022Quote: ... Fast switching between illuminations at 340 and 380 nm was performed with Lambda DG-4 (Sutter Instrument). Alternating F340 and F380 image pairs were obtained at acquisition rates of 0.3 to 2 image pairs per second ...
-
bioRxiv - Neuroscience 2019Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 MΩ; #B150-110-10HP, Sutter Instruments, Novato, CA) using an electrode puller (#P-1000 ...
-
bioRxiv - Cell Biology 2021Quote: ... with motorized stage controller (MS-2000, ASI, Eugene, OR) and filter wheel controller (Lambda 10-3, Sutter Instrument, Novato, CA). The sample was illuminated with a LED light source (pE-300 ...
-
bioRxiv - Neuroscience 2021Quote: ... to a tip resistance of 3-4MOhms with a P-97 Flaming/Brown type micropipette puller (Sutter Instruments, Atlanta, Georgia).
-
bioRxiv - Neuroscience 2022Quote: ... Glass capillaries (G150F-3, Warner Instruments, Hamden) were pulled by a micropipette puller (Model P-87, SUTTER INSTRUMENT, Novato, USA) and their tips were mechanically crushed by approximately 2 mm ...
-
bioRxiv - Neuroscience 2022Quote: ... The patch pipettes with resistance 3-5 MΩ were pulled by the pipette puller (Sutter Instrument Co., Model P-97). To measure spontaneous action potential (sAP) ...
-
bioRxiv - Neuroscience 2021Quote: ... generated by a Lambda DG-4 high-speed optical switch with a 300 W Xenon lamp (Sutter Instruments) and an excitation filter set centered around 470 nm ...
-
bioRxiv - Cell Biology 2021Quote: ... which was centrifuged at 13200 rpm in 4°C for 10min prior to loading quartz needles (Sutter Instrument) for micro-injection (Eppendorf) ...
-
Neuron-astrocyte metabolic coupling facilitates spinal plasticity and maintenance of persistent painbioRxiv - Neuroscience 2022Quote: ... Electrodes (4–8 MΩ) were pulled from borosilicate glass capillaries (O.D. 1.5 mm, I.D. 0.86 mm, Sutter Instruments, USA). Intrinsic firing properties of lamina 1 neurons were recorded in the presence of 10 mM CNQX ...
-
bioRxiv - Neuroscience 2020Quote: ... All whole-cell experiments were recorded using borosilicate glass pipettes with resistances in the 3 – 5 MΩ range and were pulled on a Flaming-Brown micropipette puller (P-1000, Sutter Instruments). Whole-cell voltage-clamp electrophysiology recordings were made from spiny projection neurons (SPNs ...
-
bioRxiv - Neuroscience 2021Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 MΩ) using an electrode puller (P-1000; Sutter Instruments) and filled with a K-gluconate-based internal solution (in mM) ...
-
bioRxiv - Cell Biology 2021Quote: ... and emission light was separated using the following filters fitted into a filter wheel controlled by a Lambda 10-3 unit (Sutter Instruments): GFP/Alexa488 (530/50 ...
-
bioRxiv - Plant Biology 2021Quote: ... Fura-2 fluorescence imaging was performed using the Zeiss Axiovert 200 microscope equipped with two filter wheels (Lambda 10-3; Sutter Instruments) and a CMOS camera (Prime sCMOS ...
-
bioRxiv - Neuroscience 2020Quote: ... Whole-cell patch clamp recordings were obtained using thin-walled borosilicate glass microelectrodes (Warner) pulled to a tip resistance of 3-5 MΩ pulled using a P-97 Flaming/Brown Micropipette Puller (Sutter Instrument). Electrodes were filled with an intracellular recording solution containing (in mM) ...
-
bioRxiv - Biophysics 2020Quote: ... A Lambda 10-3 filter switcher and shutter controller was used with a Lambda LB-LS/30 Xenon arc lamp (Sutter Instruments). Images were acquired at 1 frame/15 s for 5 m at low glucose and 1 frame/15 s for 25 m after stimulation high glucose using a Andor CCD camera ...
-
bioRxiv - Cancer Biology 2020Quote: ... and triple-band laser emission filter ZET405/488/561m (Chroma), mounted in the metal cube (Chroma, 91032) together with emission filter wheel Lambda 10-3 (Sutter instruments) with ET460/50m ...
-
bioRxiv - Neuroscience 2020Quote: Gross manipulation of the pipette is performed under manual control of the Sutter MP 285 3-axis patch manipulators (Sutter Instruments). Axial movements of the pipette are performed by the one-axis motorized translation stage (PT1-Z8 ...
-
bioRxiv - Cell Biology 2022Quote: ... 2D triple-color imaging were performed using an Olympus IX81 microscope equipped with a high-speed filter changer (Lambda 10-3; Sutter Instruments) that can change filter sets within 40 ms ...
-
bioRxiv - Neuroscience 2023Quote: ... Single neurons were recorded ‘blind’ by advancing the pipette in 3 – 5 μm steps using a single-axis stepper motor and controller (Solo, Sutter Instruments) or hydraulic micromanipulator (MX610 ...
-
bioRxiv - Neuroscience 2023Quote: ... was subsequently inserted to a depth of 1.5 mm into the brain (Extended Data Fig. 5a) at a rate of 3-5 μm/s using a motorized micromanipulator (MP-225A, Sutter Instrument). Electrode voltages were acquired at 30 kHz and bandpass filtered at 0.3 to 10 kHz using SpikeGLX (Bill Karsh ...
-
bioRxiv - Physiology 2024Quote: ... imaging was performed using an upright microscope equipped with a Grasshopper 3 camera (FLIR) and a Lambda LS light source (Sutter Instrument). The entire area of each biosensor cell was used for the calculation of ΔF/F0 values ...
-
bioRxiv - Neuroscience 2021Quote: ... In order to measure changes in cortical haemodynamics a Lambda DG-4 high-speed galvanometer (Sutter Instrument Company, USA) was used to illuminate the right somatosensory cortex with 4 wavelengths of light (495 ± 31nm ...
-
bioRxiv - Neuroscience 2021Quote: ... Fluorescence measurements were performed under whole-field epi-illumination using a DG-4 light source (Sutter Instruments, Novato, CA). Signals were detected by a CoolSnap II HQ CCD camera (Photometrics ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch glass pipettes (4-9 MΩ, Hilgenberg) were pulled by a P-97 Flaming/Brown puller (Sutter Instruments, USA) from borosilicate glass capillaries and loaded with intracellular solution (ICS ...
-
bioRxiv - Developmental Biology 2021Quote: ... that was pulled using a Laser-Based Micropipette Puller (P-2000, Sutter Instrument; Heat 450, Fil 4, Vel 150), and opened at 30 μm was mounted on a micromanipulator (M3301L ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Patch pipettes (2-4 MΩ) made from pulled (Model P-97 Flaming-Brown Micropipette Puller, Sutter Instruments, Novato, CA) and fire-polished borosilicate glass capillaries (World Precision Instruments ...
-
bioRxiv - Neuroscience 2022Quote: ... Glass micropipettes (4-8 MΩ) were pulled using a P-1000 micropipette puller (Sutter Instruments, Novato, California, United States). Whole-cell current-clamp recordings were low-pass filtered at 10 kHz and digitized at 20 kHz ...
-
bioRxiv - Neuroscience 2023Quote: ... Cells were illuminated using an ultra-high speed wavelength switching xenon arc lamp (Lambda DG-4 system; Sutter Instruments) controlled by a signal distribution box (SVB-1 ...
-
bioRxiv - Neuroscience 2023Quote: ... 4 µL per pup) was injected into the neonatal cortex using a glass pipette (Q100-30-15, Sutter Instrument) with a diameter of 45–50 µm ...
-
bioRxiv - Neuroscience 2022Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch electrodes (3–5 MΩ) were pulled with a Flaming/Brown type micropipette puller (P-97, Sutter Instruments, San Jose, CA, USA) and filled the internal solution consisting of the following (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... the recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Molecular Biology 2020Quote: ... INS1 cells were excited by 340 and 387 nm light alternatively using a DG-4 xenon-arc lamp (Sutter Instruments) and emission signals were recorded at 510 nm every 3 s using CMOS charge-coupled device (CCD ...
-
bioRxiv - Neuroscience 2021Quote: ... ID: 0.86 mm) using a 4-stage program on a Flaming-Brown P-97 micropipette puller (Sutter Instruments, Novato, CA). Patch pipettes with tip resistance of 3-5 MΩ were filled with an internal solution ...
-
bioRxiv - Biophysics 2020Quote: ... Electrodes (~0.3 MΩ) were fabricated from borosilicate glass (G100TF-4, Warner Instruments, LLC) on a horizontal puller (P-97; Sutter Instruments) and filled with 3 M KCl ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes (4-10 MΩ) were pulled from borosilicate glass (1.5 mm, outer diameter) on a Flaming/Brown micropipette puller (Sutter Instruments). The series resistance (<20 MΩ ...
-
bioRxiv - Neuroscience 2024Quote: ... Pipettes (4-5 MΩ) were pulled from thick-walled borosilicate capillary glass with a puller (model P-1000, Sutter instrument). For a voltage-clamp recording ...
-
bioRxiv - Neuroscience 2024Quote: ... Borosilicate glass micropipettes with a tip resistance of ∼4-5 MΩ were prepared using a P-1000 puller (Sutter Instruments) and then filled with an intracellular recording solution containing (in mM ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes with a tip resistance of 4–7MΩ were pulled with a flaming-Brown puller P-97 (Sutter Instruments) from borosilicate glass capillaries (Sutter Instruments ...
-
bioRxiv - Neuroscience 2024Quote: ... Recording pipettes (2–4 MΩ) were pulled from thin-walled borosilicate glass capillaries using a P95 pipette puller (Sutter Instruments). Signals were acquired using an Axon Multiclamp 700B amplifier (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... to a resistance of 2–4 MΩ using a horizontal puller (P-97 or P-1000; Sutter Instruments, Novato, CA). In most experiments ...
-
bioRxiv - Neuroscience 2021Quote: ... USA) was used to pull patch pipettes (3–6MΩ) on a horizontal Flaming/Brown micropipette puller (P-97, Sutter Instruments, Novato, CA, USA). PVN neurons were selected for whole-cell patch-clamp recordings using DIC videomicroscopy and epifluorescence (retrogradely-labeled neurons) ...
-
bioRxiv - Physiology 2019Quote: ... borosilicate glass capillaries were pulled to a tip diameter of ~3 μm using a micropipette puller (Flaming Brown P-97, Sutter Instruments, Novato, USA), heated to 300°C ...
-
bioRxiv - Plant Biology 2019Quote: ... at the top of each rhizotron and loaded the rhizotron into a fixed stage that was controlled by a Lambda 10-3 optical filter changer (Sutter Instruments, Novato, CA) in the GLO1 imaging system (Rellán-Álvarez et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (4-8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) with a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a potassium gluconate-based intracellular solution containing either (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (4–8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) using a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a KGlu based intra-pipette solution containing (in mM) ...