Labshake search
Citations for Sutter Instruments :
201 - 250 of 469 citations for Carboxypeptidase Y from Baker's Yeast since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes were pulled from borosilicate glass capillaries (Hilgenberg) using a P-97 pipette puller (Sutter Instruments) with resistances of 4-8 MΩ and back filled with intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... were pulled from borosilicate glass (G150F-3; Warner Instruments) using a model P-1000 puller (Sutter Instruments). Series resistance was 10–25 MΩ ...
-
bioRxiv - Neuroscience 2021Quote: ... Frame timing was controlled by a clock signal from Sutter IPA patch-clamp amplifier (Sutter Instruments, www.sutter.com) driven by Igor Pro and read from one of the digital I/O ports of the raspberry pi ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes were pulled from borosilicate glass (Science Products GmbH) using a Sutter P97 Puller (Sutter Instruments), with resistances of 1.5 – 3.0 MΩ ...
-
bioRxiv - Physiology 2021Quote: ... Membrane potential measurement was performed with patch pipettes pulled from thick-walled borosilicate glass tubes (Sutter Instrument), with resistances of 8–10 MΩ when filled with 76 mM K2SO4 ...
-
bioRxiv - Physiology 2021Quote: Recording micropipettes were pulled from borosilicate capillary glass using a Flaming/Brown P-97 puller (Sutter Instruments) to obtain pipettes with a resistance of 1.5-3.5 MΩ when filled with pipette solution ...
-
bioRxiv - Neuroscience 2020Quote: ... Recording electrodes of 3-5 MΩ tip resistance were pulled from borosilicate glass capillary tubing (Sutter Instruments) using a Flaming-Brown puller (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2020Quote: ... Pipettes were fabricated from borosilicate glass (1.5 mm outer diameter, 1.17 mm inner diameter; Sutter Instruments, USA), fire-polished to yield a tip resistance of 3-6 MΩ and filled with a solution consisting of 10 mM NaOH ...
-
bioRxiv - Biophysics 2020Quote: ... Micropipettes were pulled from borosilicate glass capillary tubes on a programmable horizontal puller (Sutter Instruments, Novato, CA). The pipette solution contained the following ...
-
bioRxiv - Neuroscience 2021Quote: ... Glass pipettes with 5-7 MΩ resistance were pulled from borosilicate fire polished glass capillaries (O.D.: 1.5 mm, I.D.: 0.86 mm; Sutter Instrument) prepared using a PC-10 dual-stage micropipette puller (Narishige) ...
-
bioRxiv - Biochemistry 2021Quote: ... monosodium phosphate (NaH2PO4). Quartz capillaries (o.d. 1 mm, i.d. 0.5mm, length 7.5 cm) were purchased from Sutter Instruments. Deionised (Millipore ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes were prepared from thick- walled borosilicate glass using a P-1000 micropipette puller (Sutter Instruments). For all experiments ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes were pulled from borosilicate glass with a P-97 horizontal puller (Sutter Instrument, Novato, CA), and fire-polished using a microforge (MF 83 ...
-
bioRxiv - Neuroscience 2020Quote: ... Glass needles made from borosilicate glass using a Brown-Flaming horizontal puller (P-1000 puller, Sutter Instruments) with a fine tip (about 10-15 μm diameter ...
-
bioRxiv - Neuroscience 2022Quote: ... pipette tip diameter: 2 μm) were pulled from borosilicate glass using a P-97 puller (Sutter Instruments) and filled with intracellular solution (containing in mM ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (5-6 MΩ) were pulled from borosilicate glass capillaries (GBF-150-117-10; Sutter Instruments) with a micropipette horizontal puller (P-97 ...
-
bioRxiv - Neuroscience 2024Quote: ... were pulled from borosilicate glass (G150F-3; Warner Instruments) using a model P-1000 puller (Sutter Instruments). Series resistance was 10–25 MΩ ...
-
bioRxiv - Cell Biology 2024Quote: ... Microelectrodes (50-80 MΩ) were pulled from borosilicate glass capillaries with filaments (BF150-110-10, Sutter Instruments) using a horizontal micropipette puller (P-97 ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch glass electrodes were pulled from borosilicate capillaries (BF150-86-10; Sutter Instrument Co, Novato, CA, USA) and filled with artificial intracellular fluid following component ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording pipettes were pulled from borosilicate glass on a P-1000 Flaming/Brown micropipette puller (Sutter Instruments) to a resistance of 1-3.5 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes were pulled from thick-walled borosilicate glass pipettes on a P-1000 puller (Sutter Instrument). Pipette resistance was typically 4-5 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... patch electrodes were pulled from borosilicate glass capillaries by a pipette puller (Model P-97; Sutter Instruments), with the program parameters tuned to produce an electrode resistance around 6 MΩ ...
-
bioRxiv - Neuroscience 2024Quote: ... were pulled from borosilicate glass (G150F-3; Warner Instruments) using a model P-1000 puller (Sutter Instruments). Series resistances were 8–26 MΩ ...
-
bioRxiv - Neuroscience 2024Quote: ... we pulled puffer pipettes from borosilicate glass (outer diameter 1.5 mm, inner diameter 0.86 mm, Sutter Instrument) to a resistance of 3.5 – 5.0 MΩ using a P-1000 microelectrode puller and filled them with 300 μM glutamate (Sigma ...
-
bioRxiv - Neuroscience 2024Quote: ... The patch electrodes are made from thick-walled borosilicate glass capillaries(OD-1.56, ID-0.86mm, Sutter instruments). The resistance range of all recording electrodes was between 2.8-5 MOhms ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (5-6 MΩ) were pulled from borosilicate glass capillaries (GBF-150-117-10; Sutter Instruments) with a micropipette horizontal puller (P-97 ...
-
bioRxiv - Biophysics 2024Quote: Pipettes were pulled from standard borosilicate glass (1.5 mm OD/0.86 mm ID; Sutter Instrument, Novato, CA) to a resistance of 3–4 MΩ (when filled ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (3–6MΩ) were manufactured from filamented borosilicate glass capillaries (Sutter Instruments, Novato, CA, BF100-58-10) and filled with an intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: Recordings were made at room temperature (20–22 °C) with patch electrodes fabricated from capillary glass (Sutter Instruments) pulled on a Flaming-Brown puller (Sutter Instruments ...
-
bioRxiv - Neuroscience 2020Quote: Recordings were made at room temperature (20–22 °C) with patch electrodes fabricated from capillary glass (Sutter Instrument) pulled on a Flaming-Brown puller (Sutter Instrument ...
-
bioRxiv - Physiology 2020Quote: ... Patch-clamp pipettes were fabricated from borosilicate glass (OD: 1.5 mm, ID: 0.86 mm, Sutter Instrument, Novato, CA) using a P-97 micropipette puller (Sutter Instrument) ...
-
bioRxiv - Neuroscience 2021Quote: A MOM-type two-photon microscope (designed by W. Denk, MPI, Martinsried; purchased from Sutter Instruments/Science Products) as described previously25,26 was used for this study ...
-
bioRxiv - Biophysics 2020Quote: ... Patch-clamp pipettes were fabricated from borosilicate glass (OD: 1.5 mm, ID: 0.86 mm, Sutter Instrument, Novato, CA) using a P-97 micropipette puller (Sutter Instrument) ...
-
bioRxiv - Neuroscience 2021Quote: Recordings were made at room temperature (20–22 °C) with patch electrodes fabricated from capillary glass (Sutter Instrument) pulled on a Flaming-Brown puller (Sutter Instrument ...
-
bioRxiv - Plant Biology 2021Quote: ... microelectrodes from borosilicate glass capillaries with filament (Hilgenberg,) were pulled on a horizontal laser puller (P2000, Sutter Instruments) and filled with 300 mM KCl and connected via an Ag/AgCl half-cell to a headstage (1 GΩ ...
-
bioRxiv - Cell Biology 2021Quote: ... Pipettes were pulled from 1.5 mm thin-wall borosilicate glass capillaries with filament (BF150-86-7.5, Sutter Instruments) using a horizontal P-1000 puller (Sutter Instruments ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (4-6 MO) were pulled from thin wall borosilicate glass using a micropipette puller (Sutter Instruments) and filled with a K-Gluconate-based intra-pipette solution containing 116 mM KGlu ...
-
bioRxiv - Neuroscience 2022Quote: ... fire-polished electrodes (4.0 – 5.0 MΩ) were fabricated from 1.2 mm capillary glass using a P-97 (Sutter Instruments). The pipette solution contained the following (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: ... fire-polished electrodes (1.0 - 2.0 MΩ) were fabricated from 1.7 mm capillary glass using a P-97 puller (Sutter Instruments), and the tips were coated with sticky wax (KerrLab ...
-
bioRxiv - Neuroscience 2020Quote: ... Electrodes were created from borosilicate glass with a Flaming and Brown micropipette puller (Model P-87, Sutter Instruments). These pulled patch pipettes were filled with potassium methanesulfonate (KMS ...
-
bioRxiv - Neuroscience 2021Quote: Recordings were made at room temperature (20–22 °C) with patch electrodes fabricated from capillary glass (Sutter Instruments) pulled on a Flaming-Brown puller (Sutter Instruments ...
-
bioRxiv - Neuroscience 2021Quote: Patch electrodes (2–3□MΩ) were pulled from borosilicate capillary glass of external diameter 1□mm (Sutter Instruments) using a Flaming/Brown micropipette puller (model P-2000 ...
-
bioRxiv - Neuroscience 2022Quote: ... Glass pipettes (4–6 MΩ) were pulled from borosilicate capillaries (Outer diameter: 1.5mm; Inner diameter 0.86; Sutter Instrument) and filled with and internal solution (in mM ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (4-7 MΩ) were pulled from borosilicate glass capillaries on P-97 puller (Sutter Instruments, USA). The series resistance was 10-20 MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (4-6 MΩ) were pulled from borosilicate glass using a P-70 micropipette puller (Sutter Instruments).
-
bioRxiv - Neuroscience 2023Quote: ... and recorded from using a fire-polished pulled borosilicate glass (B150-86-15, Sutter Instrument; Novato, CA, USA) filled with aCSF connected to the monopolar suction electrode (A-M Systems ...
-
bioRxiv - Physiology 2023Quote: ... Patch-clamp pipettes were fabricated from borosilicate glass (OD: 1.5 mm, ID: 0.86 mm, Sutter Instrument, Novato, CA) using a P-97 micropipette puller (Sutter Instrument ...
-
bioRxiv - Neuroscience 2022Quote: Pipettes for iontophoresis were pulled from aluminosilicate capillary glass (OD 1.5 mm, ID 1.0 mm, Sutter Instrument Company) to a resistance of ∼75 MΩ using a horizontal pipette puller (P-97 ...
-
bioRxiv - Molecular Biology 2022Quote: ... of ~ 5 μm were pulled from borosilicate glass (1.0-mm o.d., 0.78-mm inner diameter) with a P-1000 micropipette puller (Sutter Instruments). A platinum wire was inserted into the nanoESI tip ...
-
bioRxiv - Neuroscience 2024Quote: ... The patch pipettes were pulled from borosilicate glass using a micropipette puller (P97, Sutter Instruments, Novato, CA, USA). The pipette tips had a resistance of 4–6 MΩ when filled with an internal solution with the following composition (in mM) ...