Labshake search
Citations for Sutter Instruments :
151 - 195 of 195 citations for 6 methylquinoline 3 carboxylic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... All whole-cell experiments were recorded using borosilicate glass pipettes with resistances in the 3 – 5 MΩ range and were pulled on a Flaming-Brown micropipette puller (P-1000, Sutter Instruments). Whole-cell voltage-clamp electrophysiology recordings were made from spiny projection neurons (SPNs ...
-
bioRxiv - Neuroscience 2021Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 MΩ) using an electrode puller (P-1000; Sutter Instruments) and filled with a K-gluconate-based internal solution (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Borosilicate glass pipettes with a tip resistance of 3–4 MΩ (G150F-4, Warner Instruments) were pulled on a P-97 Flaming-Brown micropipette puller (Sutter Instruments) and filled with an internal solution containing ...
-
bioRxiv - Cell Biology 2021Quote: ... and emission light was separated using the following filters fitted into a filter wheel controlled by a Lambda 10-3 unit (Sutter Instruments): GFP/Alexa488 (530/50 ...
-
bioRxiv - Plant Biology 2021Quote: ... Fura-2 fluorescence imaging was performed using the Zeiss Axiovert 200 microscope equipped with two filter wheels (Lambda 10-3; Sutter Instruments) and a CMOS camera (Prime sCMOS ...
-
bioRxiv - Neuroscience 2020Quote: ... Whole-cell patch clamp recordings were obtained using thin-walled borosilicate glass microelectrodes (Warner) pulled to a tip resistance of 3-5 MΩ pulled using a P-97 Flaming/Brown Micropipette Puller (Sutter Instrument). Electrodes were filled with an intracellular recording solution containing (in mM) ...
-
bioRxiv - Biophysics 2020Quote: ... A Lambda 10-3 filter switcher and shutter controller was used with a Lambda LB-LS/30 Xenon arc lamp (Sutter Instruments). Images were acquired at 1 frame/15 s for 5 m at low glucose and 1 frame/15 s for 25 m after stimulation high glucose using a Andor CCD camera ...
-
bioRxiv - Cancer Biology 2020Quote: ... and triple-band laser emission filter ZET405/488/561m (Chroma), mounted in the metal cube (Chroma, 91032) together with emission filter wheel Lambda 10-3 (Sutter instruments) with ET460/50m ...
-
bioRxiv - Neuroscience 2020Quote: Gross manipulation of the pipette is performed under manual control of the Sutter MP 285 3-axis patch manipulators (Sutter Instruments). Axial movements of the pipette are performed by the one-axis motorized translation stage (PT1-Z8 ...
-
bioRxiv - Cell Biology 2022Quote: ... 2D triple-color imaging were performed using an Olympus IX81 microscope equipped with a high-speed filter changer (Lambda 10-3; Sutter Instruments) that can change filter sets within 40 ms ...
-
bioRxiv - Physiology 2024Quote: ... imaging was performed using an upright microscope equipped with a Grasshopper 3 camera (FLIR) and a Lambda LS light source (Sutter Instrument). The entire area of each biosensor cell was used for the calculation of ΔF/F0 values ...
-
bioRxiv - Neuroscience 2024Quote: ... Warner Instruments) were pulled to have resistances of 3-7 MΩ using a Flaming-Brown pipette puller (model P-97; Sutter Instruments). The pipette tip was initially filled with a solution containing (in mM) ...
-
bioRxiv - Neuroscience 2023Quote: ... Single neurons were recorded ‘blind’ by advancing the pipette in 3 – 5 μm steps using a single-axis stepper motor and controller (Solo, Sutter Instruments) or hydraulic micromanipulator (MX610 ...
-
bioRxiv - Neuroscience 2023Quote: ... was subsequently inserted to a depth of 1.5 mm into the brain (Extended Data Fig. 5a) at a rate of 3-5 μm/s using a motorized micromanipulator (MP-225A, Sutter Instrument). Electrode voltages were acquired at 30 kHz and bandpass filtered at 0.3 to 10 kHz using SpikeGLX (Bill Karsh ...
-
bioRxiv - Neuroscience 2023Quote: ... and monopolar stimulator pipettes (3 – 4 MΩ) were obtained from borosilicate glass capillaries with a horizontal pipette puller (P-97, Sutter Instruments). The internal pipette solution contained the following (in mM) ...
-
bioRxiv - Biochemistry 2024Quote: The glass capillary needles for injections were prepared using glass capillaries (3.5” Drummond #3-000-203-G/X) and a micropipette puller (Sutter Instrument Company). After backfilling the glass capillary needles with mineral oil (Sigma BioReagent ...
-
bioRxiv - Neuroscience 2024Quote: ... infused with Nanoject (3-000-207, Drummond) using glass injectors (3-000-203-G/X, Drummond) pulled on a horizontal pipette puller (P-1000 Sutter Instrument). After infusion the injector was left for 3 to 5 min then withdrawn ...
-
Dietary potassium and cold acclimation additively increase cold tolerance in Drosophila melanogasterbioRxiv - Physiology 2024Quote: ... and pulled to a ∼ 1-3 mm tip on a Flaming-Brown micropipette puller (P-1000, Sutter Instruments, Novato, CA, USA). After pulling ...
-
bioRxiv - Neuroscience 2022Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch electrodes (3–5 MΩ) were pulled with a Flaming/Brown type micropipette puller (P-97, Sutter Instruments, San Jose, CA, USA) and filled the internal solution consisting of the following (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... the recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 M) using an electrode puller (P-1000; Sutter Instruments®) and filled with a K-gluconate-based internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... USA) was used to pull patch pipettes (3–6MΩ) on a horizontal Flaming/Brown micropipette puller (P-97, Sutter Instruments, Novato, CA, USA). PVN neurons were selected for whole-cell patch-clamp recordings using DIC videomicroscopy and epifluorescence (retrogradely-labeled neurons) ...
-
bioRxiv - Physiology 2019Quote: ... borosilicate glass capillaries were pulled to a tip diameter of ~3 μm using a micropipette puller (Flaming Brown P-97, Sutter Instruments, Novato, USA), heated to 300°C ...
-
bioRxiv - Plant Biology 2019Quote: ... at the top of each rhizotron and loaded the rhizotron into a fixed stage that was controlled by a Lambda 10-3 optical filter changer (Sutter Instruments, Novato, CA) in the GLO1 imaging system (Rellán-Álvarez et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (4-8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) with a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a potassium gluconate-based intracellular solution containing either (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (4–8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) using a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a KGlu based intra-pipette solution containing (in mM) ...
-
bioRxiv - Biophysics 2019Quote: Patch-clamp recordings were performed using borosilicate glass pipettes pulled to ∼2-3 MΩ using a P-2000 puller (Sutter instruments, Novato, CA). Pipettes were filled with 10 mM MOPS pH 7 ...
-
bioRxiv - Neuroscience 2020Quote: Patch pipettes were prepared from borosilicate glass capillaries (G150F-3; Warner Instruments, Hamden, CT) using a P-1000 micropipette puller (Sutter Instruments, Novato, CA) and subsequently fire polished ...
-
bioRxiv - Neuroscience 2021Quote: ... L2/3 responses were probed between 200-300 microns from the cortical surface using a micromanipulator (MP-285, Sutter Instrument Company, Novato, CA). Signals were acquired after passing through unity gain (1x ...
-
bioRxiv - Neuroscience 2022Quote: Patch pipettes were prepared from borosilicate glass capillaries (G150F-3; Warner Instruments, Hamden, CT) using a P-1000 micropipette puller (Sutter Instruments, Novato, CA) and were subsequently fire-polished ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (4–8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) using a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a potassium gluconate (KGlu)-based intrapipette solution containing (in mM) ...
-
bioRxiv - Neuroscience 2023Quote: ... pulled to a fine tip (20 - 50 µm tip diameter, 3 - 4 mm tip length) using a pipette puller (P-97, Sutter Instrument, Novato, CA). Injection needles were left in place for 5- 10 min following injections to minimize diffusion ...
-
bioRxiv - Neuroscience 2023Quote: ... Whole-cell patch-clamp recordings were performed using borosilicate glass pipettes of 3–5 MΩ pulled with a micropipette puller (P-1000; Sutter Instrument, Novato, CA). For voltage-clamp recording ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes with electrode resistance of 3-7 MΩ were made fresh with a Zeitz puller (Werner Zeitz, Martinsried, Germany) from borosilicate thick glass (GC150F, Sutter Instruments, Novato, CA). Intracellular patch-pipette solution was the same as previously described (Zurek et al. ...
-
bioRxiv - Neuroscience 2024Quote: ... Visually guided whole-cell recordings were obtained with patch pipettes of ∼3 MΩ resistance pulled from borosilicate capillary glass (BF150-86-10, Sutter Instrument, Novato, CA). Electrophysiology data was acquired using a Sutter dPatch amplifier (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2020Quote: ... product HS-532B) about 1 cm away from the ends of 3-barrel borosilicate glass capillary tubes (Sutter Instrument, product FG-G3BF100-75-10) and shrinking it with an infrared lamp ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell patch-clamp recordings were performed using glass pipette electrodes (resistance 3–7 MΩ) pulled from borosilicate capillaries (BF150-86-10, Sutter Instruments, Novato, CA, USA) using a P-97 pipette puller (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2021Quote: Borosilicate capillary tubes (OD: 1.50mm, ID: 0.86mm, Warner Instruments) were pulled using a horizontal puller (Sutter instruments P-97, resistance of 3-5 MOhm) and filled with artificial Cerebral Spinal Fluid (NaCl ...
-
bioRxiv - Cell Biology 2023Quote: ... and emission light was separated using interference (530/50 nm, 590/20-nm) or longpass (650LP) filters (Semrock) mounted in a filter wheel (Sutter instruments Lambda 10-3). An electronic shutter was used to block light exposure between image captures ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch electrodes (3-5 MΩ) were guided to neurons with an MPC-200-ROE controller and MP285 mechanical manipulator (Sutter Instruments, Novato, CA USA). Neurons were held at VHold = -70 mV for sEPSC recordings ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes with a resistance of 3-5MΩ were guided to neurons with an MPC-200-ROE controller and MP285 mechanical manipulator (Sutter Instruments, Novato, CA, USA). Patch-clamp recordings were collected through a UPC-10 USB dual digital amplifier and Patchmaster NEXT recording software (HEKA Elektronik GmbH ...
-
bioRxiv - Neuroscience 2023Quote: ... Whole-cell electrophysiological recordings were conducted using borosilicate glass electrodes having an internal resistance of 3-5 MΩ (Sutter Instrument Company, Novato, California, USA). The electrode solution contained (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: Patch pipettes (5-8 MΩ) were stretched from borosilicate glass capillaries (G150TF-3, Warner instruments) using a pipette puller (Sutter Instruments, P-87, Novato, CA) and filled with a few microliters of an intracellular solution adjusted to pH 7.2 ...
-
bioRxiv - Neuroscience 2020Quote: ... was recorded via a heat-pulled borosilicate glass electrode containing an Ag/AgCl filament and filled with aCSF (electrode tip Ø, 2–3 μm; inner Ø, 0.86 mm; outer Ø, 1.5 mm; Sutter Instrument; resistance 1.5–2.0 MΩ). The electrode was inserted under the glass coverslip ∼50 μm into the cerebral cortex ...