Labshake search
Citations for Sutter Instruments :
51 - 100 of 126 citations for 7 Cyano 5 fluoroindole since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (3-5 MΩ) were pulled from borosilicate glass capillaries (Sutter Instruments, USA) with an outer diameter of 1.5 mm on a four-stage horizontal puller (P1000 ...
-
bioRxiv - Neuroscience 2021Quote: ... with a 5 or 10 µL microsyringe (Hamilton) equipped with a microinjector (Sutter Instrument) and controller (World Precision Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes (3-5 MΩ) were pulled from a horizontal puller (P1000, Sutter Instruments) and filled with the internal solution that contained (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... Glass pipettes (5-000-2005, Drummond) were pulled (Model P-97, Sutter Instrument Co) and further broken to obtain a tip of -10-15 µm inner diameter and further beveled to create a sharp tip and avoid cortical damage during insertion.Callosal projections tracings ...
-
bioRxiv - Molecular Biology 2024Quote: ... with a Flaming-Brown P-97 puller (Sutter Instruments; tip resistance 5–8 MΩ). The pipette solution contained (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (3-5 MΩ) were pulled using P-97 puller (Sutter instruments, Novato, CA) and filled with internal solutions contained (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... at approximately 5 mm away from the tip) using a laser electrode puller (Sutter Instrument, model P-2000 ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording pipettes (3.5-5 MΩ) were pulled with P-97 horizontal micropipette puller (Sutter Instruments) filled with internal solution containing (in mM) ...
-
bioRxiv - Bioengineering 2023Quote: ... were pulled to ∼3-5 MW resistance with a micropipette puller (Sutter Instruments; P-97) and polished with a microforge (Narishige ...
-
bioRxiv - Neuroscience 2019Quote: ... 575±5 nm) using a Lambda DG-4 high-speed filter changer (Sutter Instrument Company, USA). The re-emitted light was collected at a frame rate of 32Hz using a Dalso 1M60 CCD camera which was synchronized to the filter switching ...
-
bioRxiv - Neuroscience 2021Quote: ... The borosilicate patch pipettes (2–5 MΩ) were pulled with a Flaming-Brown puller (Sutter Instruments) and contained the following (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: Fluorescence imaging was performed with a Lambda DG-5 wavelength changer (Sutter Instruments, Novato, CA, USA) and a Chroma 79001 filter set (340 nm and 380 nm band-pass filters for excitation ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes (3-5 MΩ) were pulled from borosilicate capillaries (BF-150-110-10, Sutter Instrument) and filled with internal solution (10 mM NaCl ...
-
bioRxiv - Neuroscience 2024Quote: ... were pulled to resistances between 5–16 MΩ using a micropipette puller (Flaming/Brown; Sutter Instrument). For peripheral motor nerve recordings ...
-
bioRxiv - Neuroscience 2024Quote: ... A Lambda XL Xenon lamp (Sutter) with 5 mm liquid light guide (Sutter Instrument, Novato, CA) was used to illuminate samples ...
-
bioRxiv - Neuroscience 2020Quote: ... were pulled to tip resistances of 5-8 M Ώ using a multi-stage puller (Sutter Instruments) and were filled with K-gluconate based intracellular solution ...
-
bioRxiv - Neuroscience 2020Quote: ... Recording electrodes of 3-5 MΩ tip resistance were pulled from borosilicate glass capillary tubing (Sutter Instruments) using a Flaming-Brown puller (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes of 5–10 MΩ were pulled with a P-97 Flaming/Brown puller (Sutter Instruments) from borosilicate glass capillaries and the intracellular solution used contained (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording electrodes (3-5 MΩ) were pulled with a Flaming-Brown Micropipette Puller (Sutter Instruments, Novato, CA) using thin-walled borosilicate glass capillaries.
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (5-6 MΩ) were pulled from borosilicate glass capillaries (GBF-150-117-10; Sutter Instruments) with a micropipette horizontal puller (P-97 ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording electrodes (3-5 MOhm) were pulled with a Flaming-Brown Micropipette Puller (Sutter Instruments, Novato, CA) using thin-walled borosilicate glass capillaries ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch electrodes were pulled to tip resistances of 5-8 MΩ using a multistage puller (Sutter Instruments) and were filled with intracellular solution ...
-
bioRxiv - Neuroscience 2019Quote: ... Patch pipettes (3 - 5 MΩ) were pulled using a Brown/Flaming P-97 micro pipette puller (Sutter Instruments). Slices were perfused with oxygenated recording solution (~2ml/min ...
-
bioRxiv - Biophysics 2021Quote: ... Borosilicate glass patch pipettes of 3-5 MΩ were formed using a micropipette puller (Sutter Instruments, P-97) and then coated with Sylgard 184 silicone (Dow Corning) ...
-
bioRxiv - Neuroscience 2021Quote: ... Borosilicate pipettes of 5 – 8 MOhm resistance were pulled with a Flaming / Brown micropipette puller P-1000 (Sutter instruments). All recordings were done in current clamp with an intracellular solution containing 130 mM K-gluconate ...
-
bioRxiv - Neuroscience 2020Quote: The STG was desheathed dorsally and neuron somata were impaled using glass microelectrodes (ID: 0.86 mm; OD: 1.5 mm; 5-20 MΩ; Sutter Instrument). Microelectrodes were backfilled with a solution containing 10 mM MgCl2 ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Patch electrodes with resistances of 2-5 MΩ were pulled with a P-97 micropipette puller (Sutter Instruments, USA). The conventional whole-cell recordings were obtained by manual suction for hERG ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were filtered at 5 kHz and sampled at 10 kHz and stored in a computer (Sutter Instrument Co.). The standard internal pipette solution for whole-cell voltage-clamp contained (in mM ...
-
bioRxiv - Pathology 2023Quote: ... Recording electrodes (3–5 MΩ) were pulled on a model P-87 micropipette puller (Sutter Instruments, Novato, CA, USA) and polished using a MF-830 MicroForge (Narishige Scientific Instruments Laboratories ...
-
bioRxiv - Cell Biology 2019Quote: ... Glass pipettes with a resistance of 2.5 – 5 MΩ measured with physiological solutions (below) were pulled using an automatic P-97 Micropipette Puller system (Sutter Instruments).
-
bioRxiv - Neuroscience 2019Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 MΩ; #B150-110-10HP, Sutter Instruments, Novato, CA) using an electrode puller (#P-1000 ...
-
bioRxiv - Neuroscience 2020Quote: ... World Precision) to obtain pipette resistance ranging from 5 – 8 MΩ using next generation micropipette puller (P-1000, Sutter Instrument). External solution is consist of 140 mM NaCl ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled using a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes (5-10 MΩ were pulled from borosilicate glass (1.5 mm, outer diameter) on a Flaming/Brown micropipette puller (Sutter Instruments). The series resistance (<20 MΩ ...
-
bioRxiv - Cell Biology 2020Quote: ... Glass micropipettes of inner diameter of ~5 μm were fabricated by pulling borosilicate glass pipette (BF100-50-10; Sutter Instrument) using a micropipette puller (Sutter Instrument) ...
-
bioRxiv - Biophysics 2020Quote: ... The pipettes with bubble number (BN)49 3.5-5.0 were made from the Kimble Chase 2502 soda lime glass using a Sutter P-86 puller (Sutter Instruments).
-
bioRxiv - Neuroscience 2022Quote: ... The patch pipettes with resistance 3-5 MΩ were pulled by the pipette puller (Sutter Instrument Co., Model P-97). To measure spontaneous action potential (sAP) ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled on a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Recording pipettes were generated from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and were filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Neuroscience 2023Quote: Patch pipette of 5-8 MΩ tip resistance were fabricated from borosilicate glass by using a microelectrode puller (Sutter Instruments). The initial access resistance was 18.2±0.5 MΩ for current-clamp recordings (n=21 ...
-
bioRxiv - Neuroscience 2024Quote: ... Pipettes (4-5 MΩ) were pulled from thick-walled borosilicate capillary glass with a puller (model P-1000, Sutter instrument). For a voltage-clamp recording ...
-
bioRxiv - Neuroscience 2024Quote: ... Borosilicate glass micropipettes with a tip resistance of ∼4-5 MΩ were prepared using a P-1000 puller (Sutter Instruments) and then filled with an intracellular recording solution containing (in mM ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording pipettes were pulled from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Neuroscience 2020Quote: ... All whole-cell experiments were recorded using borosilicate glass pipettes with resistances in the 3 – 5 MΩ range and were pulled on a Flaming-Brown micropipette puller (P-1000, Sutter Instruments). Whole-cell voltage-clamp electrophysiology recordings were made from spiny projection neurons (SPNs ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes were made from borosilicate glass with a Flaming-Brown puller (P-97, Sutter Instruments; tip resistance 5-10 MΩ). The pipette solution contained (in mM ...
-
bioRxiv - Neuroscience 2021Quote: ... The recording electrode was pulled from a borosilicate glass pipette (3–5 MΩ) using an electrode puller (P-1000; Sutter Instruments) and filled with a K-gluconate-based internal solution (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... Whole-cell patch clamp recordings were obtained using thin-walled borosilicate glass microelectrodes (Warner) pulled to a tip resistance of 3-5 MΩ pulled using a P-97 Flaming/Brown Micropipette Puller (Sutter Instrument). Electrodes were filled with an intracellular recording solution containing (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch-pipettes (5–13 MΩ) were made from borosilicate glass capillary with a Flaming-Brown puller (P-1000 or P-97; Sutter Instrument) and polished with a microforge ...
-
bioRxiv - Neuroscience 2020Quote: ... Only virus transduced mice identified by their fluorescence upon excitation with a 572 nm LED (Cairn Research) were recorded using patch pipettes of 5–10 MΩ (P-97 Flaming/Brown puller, Sutter Instruments) containing intracellular solution (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Up to ~1.2 μL of viral solution per brain hemisphere were injected at cortical depths of 400 – 500 μm with a glass micropipette (Blaubrand IntraMARK 5 μl) pulled to about 10 – 20 μm inner diameter at the tips using a horizontal puller (Sutter Instruments). Usually 2–3 sites per hemisphere in S1 cortex were injected to increase the transduced brain area ...