Labshake search
Citations for Benchmark Scientific :
1 - 50 of 196 citations since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2024Quote: ... The tissue homogenate was then agitated on a Benchmark Roto-Mini Plus (Benchmark Scientific, Sayreville, NJ) for 2 hours at 4°C ...
-
bioRxiv - Molecular Biology 2024Quote: ... 25 - 30 mg of sample was lysed in 600 µl of TRIzol reagent using a D1000 handheld homogeniser (Benchmark Scientific, USA), and then centrifuged at 16,000 g for 30 seconds at 4 °C to remove debris ...
-
bioRxiv - Microbiology 2024Quote: ... and the mixture was vortexed for 45 min in a Plate Incubator (Benchmark Scientific, Product. No. H6004). Solubilized indigoidine was then separated from the cell debris by centrifugation at 21,130 x g for 1.5 min and its concentration was measured by detecting its absorbance at 612 nm using a microplate reader and converted to g/L by applying the standard curve previously generated with purified indigoidine (10) ...
-
bioRxiv - Microbiology 2024Quote: ... Tubes with planktonic cultures and Aclar discs were vortexed at 2,500 rpm for 5 min in a BenchMixer multitube vortexer (Benchmark Scientific) and then diluted (10-fold serial dilutions ...
-
bioRxiv - Bioengineering 2024Quote: 30 µL of a DNA microbead suspension were pelleted using a C1008-GE myFUGE mini centrifuge (Benchmark Scientific) for 2 min ...
-
bioRxiv - Bioengineering 2024Quote: ... and pelleted in a reaction tube by spinning them down for 2 min with a C1008-GE myFUGE mini centrifuge (Benchmark Scientific). 80 µL of the supernatant were then taken off and discarded ...
-
bioRxiv - Bioengineering 2024Quote: ... 30 µL of a suspension of DNA microbeads were pelleted using a C1008-GE myFUGE mini centrifuge (Benchmark Scientific) for 2 min ...
-
bioRxiv - Bioengineering 2024Quote: 30 µL of a suspension of photocleavable DNA microbeads (60% photocleavable linker DNA microbeads) were pelleted using a C1008-GE myFUGE mini centrifuge (Benchmark Scientific) for 2 min ...
-
bioRxiv - Bioengineering 2024Quote: ... homogenized with a bead homogenizer (Benchmark Scientific), and then separated using phase-gel tubes (Qiagen)[28] ...
-
bioRxiv - Cell Biology 2024Quote: ... The cells were mixed with 300 mg of glass beads (0.5mm) before being mechanically homogenized by a bead beater (BeadBug, Benchmark Scientific) for five cycles of 1min breaking interrupted by 1min incubation on ice ...
-
bioRxiv - Bioengineering 2024Quote: ... and spun down for one minute (MyFuge C1012, Benchmark Scientific). Samples in 8-well tubes were heat-shocked for three minutes at 72 °C (C1000 Touch Thermal Cycler ...
-
bioRxiv - Biophysics 2024Quote: ... and the BV1000 Vortex Mixer (Benchmark Scientific, Edison, NJ).
-
bioRxiv - Cancer Biology 2024Quote: ... lysed using a BeadBlaster 24R (Benchmark Scientific) followed by sample sonication for 60 seconds ...
-
bioRxiv - Cancer Biology 2024Quote: ... tumor tissue was homogenized using a Precellys Evolution (Bertin Technologies) with High Impact Zirconium beads (Benchmark Scientific D1032-30). RNA was then extracted using the RNeasy Mini kit (Qiagen ...
-
bioRxiv - Bioengineering 2024Quote: ... Tissue samples were homogenized using a Beadbug bead homogenizer (Benchmark Scientific) in a complete extraction buffer composed of 100mM Tris (pH 7.4) ...
-
bioRxiv - Microbiology 2024Quote: ... with the alternate use of 0.1 mm zirconium bead containing BeadBug homogenizer tubes (#Z763764; Benchmark Scientific, Sayreville USA) for bead beating ...
-
bioRxiv - Molecular Biology 2024Quote: ... Cells were broken with glass beads using six cycles of 30 seconds on and 30 seconds off at 4°C using a Beadblaster 24 (Benchmark Scientific). Another 250 ul of lysis buffer was added to each tube ...
-
bioRxiv - Physiology 2024Quote: ... was added to the ovaries in Lysing Matrix D tubes (MP, 6913500) and tissues were homogenized with a BeadBug 6 microtube homogenizer (Benchmark Scientific, D1036) at 3,500 rpm for 30 seconds for 3 cycles in the cold room ...
-
bioRxiv - Systems Biology 2024Quote: ... (Benchmark Scientific, Incu-Mixer Microplate vortexer), trypsin/LysC were deactivated by addition of 17 μl of 30% formic acid (final concentration 1%) ...
-
bioRxiv - Synthetic Biology 2024Quote: ... cells were resuspended in 1X TBS and stored at 4°C with constant rotation (Benchmark Scientific Roto-Mini Plus Variable Speed Rotator R2024 ...
-
bioRxiv - Molecular Biology 2024Quote: The samples were homogenized by bead beating (BeadBug 3 Microtube Homogenizer, Benchmark Scientific #D1030) for 3 sets of 30 seconds alternating with 30 seconds of incubation on ice ...
-
bioRxiv - Physiology 2024Quote: ... The insects were homogenized using BeadBlaster 24 microtube homogenizers (Benchmark Scientific, NJ, USA). RNA from the mixture was separated according to the TRIzol manufacturer’s protocol ...
-
bioRxiv - Bioengineering 2024Quote: ... or a Beadbug bead homogenizer (Benchmark Scientific). For lung ...
-
bioRxiv - Cell Biology 2024Quote: ... Temperature was controlled using benchtop incubators (MyTemp Digital Heat & Cool Incubator; BenchMark Scientific, Sayreville NJ USA) equipped with LED aquarium lighting (Hydra 16HD ...
-
bioRxiv - Microbiology 2024Quote: ... Cell pellets were resuspended in 1 mL of RNAproTM solution (MP Bio) and processed five-times for 40 sec at 400 rpm in a BeadBugTM homogenizer (Benchmark Scientific). Cell debris was removed by centrifugation at 16,000 x g for 5 min at 4°C ...
-
bioRxiv - Cell Biology 2024Quote: ... membranes were washed and incubated in 5 mL of primary antibody solution (primary antibody diluted in 1x TBST + 1% powdered milk) overnight at 4°C on a BenchRocker (Benchmark Scientific). The primary antibodies used were against UNC45B (rabbit polyclonal at 1:2,500 ...
-
bioRxiv - Cancer Biology 2024Quote: ... Each sample was vortexed for 15 s and placed on an Orbi-blotter mixing rotator (Benchmark Scientific, Edison, NJ, USA) at max speed to incubate in an ice bath for 10 min ...
-
bioRxiv - Microbiology 2024Quote: ... homogenized in 1 mL of PBS using a bead blaster (Benchmark Scientific, Sayreville, NJ), and centrifuged for 30 sec at 1,100 x g ...
-
bioRxiv - Microbiology 2024Quote: ... Bacteria were lysed utilizing a Bead Bug 3 Microtube Homogenizer (D1030, Benchmark Scientific, Sayreville, NJ, USA) for four times at 45 second intervals at 4000 r.p.m ...
-
bioRxiv - Microbiology 2024Quote: ... Bacteria were lysed utilizing a Bead Bug 3 Microtube Homogenizer (D1030, Benchmark Scientific, Sayreville, NJ, USA) three times at 45 second intervals at 4000 rpm ...
-
bioRxiv - Microbiology 2024Quote: ... Bacteria were lysed utilizing a Bead Bug 3 Microtube Homogenizer (D1030, Benchmark Scientific) three times at 45 second intervals at 4000 rpm ...
-
bioRxiv - Physiology 2024Quote: ... Scaled liver extracts were transferred to bead blaster tubes with zircon beads and homogenized using D2400 BeadBlaster homogenizer (Benchmark Scientific, NJ) in cold 80% methanol spiked with 500 nM Metabolomics amino acid standard mix (Cambridge Isotopes Laboratory ...
-
bioRxiv - Microbiology 2024Quote: ... Bacteria were lysed utilizing a Bead Bug 3 Microtube Homogenizer (D1030, Benchmark Scientific, Sayreville, NJ, USA) four times at 45 second intervals at 4000 r.p.m ...
-
bioRxiv - Microbiology 2024Quote: ... of the fecal slurry was removed using a fresh 1 mL serological pipette and transferred to a 2 mL tube pre-filled with garnet shards and a 6 mm zirconium bead (Benchmark Scientific, D1033-30G). To this tube ...
-
bioRxiv - Microbiology 2024Quote: ... Flies were homogenized immediately after collection using a bead mill (Benchmark Scientific, BeadBlaster 96). DNA was extracted using the QIAwave DNA Blood & Tissue Kit (Qiagen ...
-
bioRxiv - Developmental Biology 2024Quote: ... 200 eggs were homogenized in 350 µl acetonitrile containing 31.25 pg deuterated JH III (JHD3) in a silanized 2 ml Snap-It vial (Thermo-Fisher) on ice using a Benchmark D1000 homogenizer (Benchmark Scientific, New York), then capped and spun at 5000 g for 15 min at 4°C ...
-
bioRxiv - Biochemistry 2024Quote: ... Each sample was vortexed on BenchMixer (Benchmark Scientific, Edison, NJ, USA) at mid-speed (6 ...
-
bioRxiv - Molecular Biology 2024Quote: RNA was extracted from biopsies via a TRIzol-chloroform extraction supplemented with a bead-based tissue homogenization (Benchmark Scientific) and purified using the Zymo Clean and Concentrator – 5 kit following the standard protocol for on-column DNase treatment ...
-
bioRxiv - Immunology 2024Quote: ... and transferred to a 2 mL tube pre-filled with 3.0 mm high-impact zirconium beads (Benchmark Scientific). 1X RIPA Buffer (Cell Signaling Technology ...
-
bioRxiv - Cancer Biology 2024Quote: ... The plates were then incubated on a plate shaker (Benchmark Scientific, Sayreville, NJ, USA) at 500 rpm for 20 minutes and read using the EnVision XCite plate reader (PerkinElmer) ...
-
bioRxiv - Cell Biology 2024Quote: ... and were incubated for 2 hours at room temperature on a BenchBlotter 2D Rocker (Benchmark Scientific). Membranes were washed three times for 15 minutes each in 1x TBST to remove excess antibodies ...
-
bioRxiv - Biochemistry 2024Quote: ... bead-beating was performed using a BeadBug™ 3 Microtube homogenizer (Benchmark Scientific) for 30s at 4,000 Hz ...
-
bioRxiv - Genetics 2024Quote: ... Samples were incubated for 2 hours at room temperature on a belly dancer (BenchWaver™ 3D Rocker, Benchmark Scientific) (105 RPM ...
-
bioRxiv - Physiology 2024Quote: ... Samples were homogenized using D2400 BeadBlaster homogenizer (Benchmark Scientific, NJ) then spun at 21kg for 3min ...
-
bioRxiv - Bioengineering 2024Quote: ... Samples were homogenized in TRIzol reagent with a bead homogenizer (Benchmark Scientific), and then separated using phase-gel tubes (Qiagen) ...
-
bioRxiv - Bioengineering 2024Quote: ... cells were single-cell dispersed with TrypLE and resuspended in 6 mL of ESFM within a 6-well plate at a concentration of 5-8 million cells per well on an orbital shaker (Orbi-Shaker CO2, Benchmark Scientific) at 115 RPM.
-
bioRxiv - Cell Biology 2024Quote: ... cells were single-cell dispersed with TrypLE and resuspended in 6 mL of ESFM within a 6-well plate at a concentration of 5-8 million cells per well on an orbital shaker (Orbi-Shaker CO2, Benchmark Scientific) at 115 RPM ...
-
bioRxiv - Genetics 2024Quote: ... Each sample was homogenized for 10 cycles on a bead blaster homogenizer (Benchmark Scientific, Edison, NJ), with each cycle consisting of 30 sec homogenization at 6 m/s followed by a 30 sec pause ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Worms were transferred in 100 µl M9 buffer (containing 0.025% Tx) and crushed using a Bead Bug Microtube Homogeniser (Benchmark Scientific) for 3 mins at 320 rpm ...
-
bioRxiv - Neuroscience 2023Quote: ... The mix was incubated for 2 h at 37 °C with shaking (1000 rpm) in an Incu-Mixer MP2 (Catalog H6002 Benchmark Scientific). Samples were transferred to Multiscreen FB Filter plates (Catalog MSFBN6B50 ...