Labshake search
Citations for Polysciences :
601 - 650 of 663 citations for 6 Hydroxy 2 2 4 4 Tetrabde Unlabeled 50 Ug Ml In Nonane since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... and 5 µg of transfer plasmid were transfected with polyethylenimine (8mg/mL sterlile water, Polysciences, Warrington, PA, USA). After 60–72 h of incubation ...
-
bioRxiv - Biophysics 2024Quote: ... Cells were transfected using a polyethylenimine (PEI) agent (10 μl of 1 mg/ml per dish hereafter; Polysciences) with pCAG plasmids encoding human A1R ...
-
bioRxiv - Immunology 2021Quote: ... 480µg of each plasmid was co-transfected with 120µg of BirA (Howarth et al., 2008) and 12mg PEI-Max (1 mg/mL solution, Polysciences) in the presence of 200 µM biotin (final concentration) ...
-
bioRxiv - Cell Biology 2022Quote: ... HEK293T cells were cultured in T75 flasks and transfected at approximately 70% confluency with 7500 ng of the lentiviral vector of interest and packaging plasmids pCMV-dR8.91 (6750 ng) and pCMV-VSV-G (750 ng) with 75 µL of polyethyleneimine (PEI, 1 mg/mL; Polysciences). Approximately 72 hours after transfection ...
-
bioRxiv - Molecular Biology 2020Quote: ... HEK293T cells in a 10 cm dish were transfected with 40 µL 1.0 mg/mL polyethylenimine (Polysciences, Warrington, PA) and 15 µg plasmid and incubated for 24 h ...
-
bioRxiv - Microbiology 2021Quote: ... the pLHCX or pQXCIP packaging vector of interest and pCMV VSV-G using 1mg/ml PEI®-MAX (Polysciences). Media was replaced 16 h post-transfection and viral supernatants were harvested through a 0.45 µm filter ...
-
bioRxiv - Biochemistry 2020Quote: ... For formation of DNA:PEI complexes 1 μg DNA/mL transfection volume and 5 μg of 40 kDa PEI (Polysciences) were first diluted separately in 5% transfection volume in supplemented F17 media ...
-
bioRxiv - Biophysics 2022Quote: ... with the density of about 2.5 million cell/ml were transfected using 3 mg plasmid by poly-ethylenimine (PEI, Polysciences) with a 1:3 plasmid to PEI weight ratio ...
-
bioRxiv - Biochemistry 2023Quote: Cells were transfected with plasmid DNA (0.75 µg) using a 1:3 (w/v) ratio of DNA to polyethyleneimine “MAX” MW 40,000 (1 mg/ml, Polysciences). These were first individually diluted in 100 µl of 150 mM NaCl ...
-
bioRxiv - Biochemistry 2023Quote: ... cells were transfected with a total of 125 μg DNA encoding the full ECD per 250 mL of cells using polyethylenimine (PEI, 1:3 DNA:PEI ratio; Polysciences), according to the manufacturer’s protocol ...
-
bioRxiv - Bioengineering 2024Quote: ... cells were transfected with 0.5 μg of plasmid DNA per well using 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.). Twenty-four hours after transfection ...
-
bioRxiv - Bioengineering 2024Quote: ... Twenty-four hours after transfection with 0.5 μg of plasmid DNA per well using 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.), cells were incubated in HBSS containing 10 mM HEPES-NaOH (pH 7.4 ...
-
bioRxiv - Bioengineering 2024Quote: ... transfection was carried out using 0.5 μg of plasmid DNA and 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.). Twenty-four hours after transfection ...
-
bioRxiv - Microbiology 2020Quote: ... were transfected with the plasmid DNA diluted in PBS (0.67 μg total plasmid DNA per ml of culture) using polyethylenimine (Polysciences, Inc.) at a DNA-to-PEI ratio of 1:3 ...
-
bioRxiv - Cell Biology 2020Quote: ... and 15µg of an AAV plasmid carrying the transgene of interest were mixed in OptiMEM with PEI-MAX (final concentration 80µg/ml, Polysciences #24765). 2ml of this solution were then added dropwise to each of the 6 HEK293T 15cm2 plates ...
-
bioRxiv - Biochemistry 2019Quote: ... followed by ∼3 microliters of the final assay solution containing 5 ng mL-1 500 nm diameter beads (PolySciences Inc,), coated nonspecifically with neutravidin18(ThermoFisher Inc.).
-
bioRxiv - Microbiology 2021Quote: ... expression medium was added to reduce cell density to 1.0 × 106 ml−1 for transfection with polyethyleneimine (PEI) (Polysciences, Inc). Next ...
-
bioRxiv - Neuroscience 2020Quote: ... and light chains (CA5-VL(X3)_pHL_sec) at a 1:1 ratio using polyethyleneimine (PEI, 1 mg/ml, MW 40,000, Polysciences Cat.# 24765) transfection reagent ...
-
bioRxiv - Bioengineering 2020Quote: ... was applied at 1 μg/mL for 90 minutes to stain the nuclei and the samples were washed and mounted with AquaPoly/Mount (Polysciences). Whole and pseudo-islets were imaged on a Zeiss NLO LSM 710 laser scanning confocal microscope (Carl Zeiss).
-
bioRxiv - Microbiology 2020Quote: ... Infections were performed by spinoculation for 2 hours at 1400 x g with VSVg pseudotyped HIV-1 at MOI of 5 in the presence of 1 μg/ml PEI (Polysciences) and 16 μg/ml Polybrene (Sigma-Aldrich).
-
bioRxiv - Cancer Biology 2022Quote: ... RIKEN BRC) [22] were mixed with 111 µl of 1 mg/ml PEI MAX® (pH7.5) (Cat. No. 24765-1, Polysciences) in Opti-MEM™ I Reduced Serum Medium (Cat ...
-
bioRxiv - Microbiology 2019Quote: ... expression medium was added to reduce cell density to 1.0×106 ml-1 for transfection with polyethyleneimine (PEI) (Polysciences, Inc). Next ...
-
bioRxiv - Immunology 2020Quote: ... the cells were transfected using 6 μg p509 and 6 μg p2670 plasmid DNAs (Neuhierl et al., 2002) mixed with 72 μl of a 1 mg/ml stock solution of polyethylenimine (#24765; Polysciences) in water (pH 7.0 ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were incubated at 37°C for 72 hours after which cells were fixed with 1 ml of 10% formaldehyde (Polysciences) was added for 24 hours to ensure inactivation of virus ...
-
bioRxiv - Molecular Biology 2020Quote: ... Yeast strains were grown in rich medium (YPD) to mid-log phase (∼1.5×107/ml) and cross-linked with methanol-free formaldehyde (1% final concentration, Polysciences Inc) for 30 min and quenched with 0.25M final concentration of glycine (from 2.5M stock ...
-
bioRxiv - Microbiology 2020Quote: ... at a density of 2.5 × 106 cells/ml were transfected with microbody expression vector plasmid DNA using polyethyleneimine (Polysciences, Inc) at a 1:3 plasmid:PEI ratio ...
-
bioRxiv - Immunology 2021Quote: ... HEK293F were grown to a density of ∼1.0 × 106 cells/ml and were co-transfected with heavy chain (HC) and (LC) plasmids (1:1) mixed with PEIMAX (Polysciences). After five days ...
-
bioRxiv - Biochemistry 2022Quote: ... The transfection solution was prepared by combining 25 µl (per dish hereafter) of polyethylenimine (PEI) Max solution (1 mg ml-1; Polysciences), 1 ml of Opti- MEM (Thermo Fisher Scientific ...
-
bioRxiv - Molecular Biology 2022Quote: ... These vectors were transiently transfected into 293F cells at a concentration of 1 million/ml with 1 μg of DNA per million cells using branched polyethylenimine (PEI) (Polysciences). 60-72 hours post-transfection ...
-
bioRxiv - Genomics 2023Quote: ... Expi293F cells at a density of 3×106 cells/mL were transfected with 1mg/L of culture of plasmid complexed with PEI Max 40K (cat. 24765-100, Polysciences) in a 1:2 plasmid:PEI w/w ratio in 40mL Opti-MEM (cat ...
-
bioRxiv - Immunology 2023Quote: ... Expi293 cells were used for transient transfection with the suitable S2P stabilized S-expression plasmids or other vectors by using 1 mg/mL polyethylenimine (PEI, Polysciences). The supernatant was harvested and the S trimer was purified using Ni-NTA resin (Invitrogen ...
-
bioRxiv - Genetics 2023Quote: ... or recombined forms of eG-SCON-FRT-FP was mixed with 8 μl of polyethyleneimine (1 mg/ml; Polysciences, 23966). These solutions were then incubated at room temperature for at least 15 minutes before being added dropwise to the cells ...
-
bioRxiv - Immunology 2022Quote: Secreted IgG was produced by co-transfecting 106 293F cells/mL with the paired heavy and light chain expression plasmids at a ratio of 1:1 in Freestyle 293 media using 1 mg/mL PEI Max (Polysciences). Transfected cells were cultured for 7 days with gentle shaking at 37°C ...
-
bioRxiv - Biochemistry 2023Quote: ... Transfection was performed when the cell density reached 2.5 × 106 cells per mL by using expression plasmids and polyethylenimines (PEIs, Polysciences, USA). Approximately 1.5 mg of plasmids were premixed with 4.5 mg of PEIs in 50 mL of fresh medium for 25 minutes before application ...
-
bioRxiv - Neuroscience 2023Quote: ... pUCmini-iCAP-PHP.eB and pHelper plasmid with the plasmid ratio of 1:4:2 based on micrograms of DNA were transfected into cells at >90% confluency with 1mg/ml polyethyleneimine (PEI, Linear, MW 25000, Polysciences). pUCmini-iCAP-PHP.eB for PHP.eB production was a gift from Dr ...
-
bioRxiv - Genetics 2021Quote: ... -eG-DECAI-FP or recombined forms of eG-SCON-FP or eG-DECAI-FP) was mixed with 8 μl of polyethyleneimine (1 mg/ ml; Polysciences, 23966) and incubated at room temperature for at least 15 minutes before being added dropwise to the cells ...
-
bioRxiv - Neuroscience 2021Quote: ... This was followed by incubation on a mixer at room temperature overnight in an approximately 1 mL mixture of 1 part propylene oxide and 1 part Polybed resin solution (Poly/Bed® 812 Embedding Media, Polysciences, Inc. ...
-
bioRxiv - Bioengineering 2021Quote: ... and packaging plasmids pCMV-dR8.91 (900 ng) and pCMV-VSV-G (100 ng) with 12 µL of polyethyleneimine (PEI, 1 mg/mL; Polysciences 24765-1) into HEK293T cells that had been grown to 60-80% confluence in 6-well plates ...
-
bioRxiv - Immunology 2022Quote: ... 6 µg pMSCV retroviral plasmid and 3.5 µg pCL-Eco packaging vector were preincubated in 500 µl of complete DMEM at room temperature for 15 min before mixing with 500 µl of 80 µg/ml PEI max (Polysciences, 24765) in complete DMEM ...
-
bioRxiv - Biochemistry 2022Quote: ... Transfection reactions were prepared by the addition of 2-10 ug of bacmid DNA to 100 μl 1xPBS and 12 μL polyethyleneimine (PEI) at 1 mg/mL (Polyethyleneimine “Max” MW 40.000, Polysciences #24765, USA) to 100 μL 1xPBS ...
-
bioRxiv - Microbiology 2021Quote: ... were transiently transfected at a cell density of 1 × 106 cells/mL using a 1:3 ratio of plasmid DNA and polyethylenimine (PEI 25K™, Polysciences). Cells were incubated at 37°C for 7 days in a humidified incubator containing 8% CO2 ...
-
bioRxiv - Biochemistry 2021Quote: ... Transfection reactions were prepared by the addition of 2-10 μg of bacmid DNA to 100 μL 1xPBS and 12 μL polyethyleneimine (PEI) at 1 mg/mL (Polyethyleneimine ‘‘Max’’ MW 40.000, Polysciences #24765, USA) to 100 μL 1xPBS ...
-
bioRxiv - Biochemistry 2020Quote: ... were transiently transfected with a mixture of plasmid DNA diluted in PBS (0.67 μg total plasmid DNA per ml of culture) and Polyethylenimine (PEI) (Polysciences, Inc., 23966) at a DNA-to-PEI ratio of 1:3 ...
-
bioRxiv - Microbiology 2021Quote: ... cells were transfected at a cell density of 1 million mL-1 using a mixture of 1 μg of recombinant expression plasmid and 3 μg of polyethyleneimine (PEI; Polysciences, Germany). Cultures were supplemented with 0.6% Primatone RL (Merck ...
-
bioRxiv - Microbiology 2022Quote: HIV virus was produced by transient transfection of HEK293T cells using Polyethyleneimine (PEI, 1 mg/ml, linear, MW 25000, Polysciences Inc.). Pseudotyping of GFP-HIV (HIV-1 NL4-3 ΔEnv EGFP Reporter Vector ...
-
bioRxiv - Microbiology 2024Quote: ... and NiV-M-GFP at a 9:1:5 ratio by using polyethylenimine (PEI) at 1 mg/ml (Polysciences, 23966-100). At 48hrs posttransfection ...
-
bioRxiv - Immunology 2020Quote: ... to 100 μL and then added to 6.0 μg of polyethylenimine (PEI) (1 mg/mL, linear, 25 kDa; Polysciences, Warrington, FL, USA) diluted in PBS to 100 μL (3:1 ratio of PEI to DNA (w/w)) ...
-
bioRxiv - Immunology 2021Quote: ... The plasmids of 9μg pHAGE-luciferase-GFP、 psPAX2 and Zhou-COVID-19-Spike were co-transfected into HEK293T cells by using 1 μg/mL polyetherimide (Polysciences, Warrington, PA) in DMEM medium containing 10% FCS ...
-
bioRxiv - Biophysics 2022Quote: ... 100-200 µg of purified bacmid in 1 mL water were incubated with 400 µg of 25000 MW polyethyleneimine (PEI; Polysciences Cat# 23966) in 1 mL water at 55 degC for 30-45 minutes to sterilize ...
-
bioRxiv - Immunology 2023Quote: ... at a density of 2.0×106 cells/ml and co-transfected with pMlink-N-FLAG-p22phox-NOX2 and pMlink-EROS using PEI 4000 reagent (Polysciences, Warrington, PA). The transfected cells were cultured for 48 h and collected by centrifuged (4,000 × g ...