Labshake search
Citations for Polysciences :
151 - 200 of 276 citations for 6 Fluoro naphthalene 2 carboxaldehyde since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... Sections were picked up onto 1×2 mm formvar coated copper slot grids (Polysciences), and further stained with uranyl acetate followed by lead citrate ...
-
bioRxiv - Immunology 2021Quote: ... Small-scale vector preparations were generated by polyethylenimine or PEI (Polysciences, Cat #24765-2) triple transfection of AC1 or AC3 ITR-flanked transgene ...
-
bioRxiv - Biochemistry 2022Quote: ... An aqueous 10µg/ml stock of linear 25kDa PEI (Polysciences, catalogue number 23966-2) was used for the transfection ...
-
bioRxiv - Cancer Biology 2022Quote: ... and 19.5 μg of psPAX2 were transfected using polyethylenimine (1μg/μl, Polysciences # 23966-2) into 293T cells plated in 6-well plates ...
-
bioRxiv - Cell Biology 2020Quote: ... in a ratio of 4:2:1 using polyethylenimine (PEI) (Cat#23966-1, Polysciences, Inc.) (PEI:DNA mass ratio 3:1) ...
-
bioRxiv - Cell Biology 2020Quote: Third-generation VSV.G pseudotyped HIV-1 lentiviruses were produced by polyethylenimine (PEI, Polysciences #23966-2)-transfection of HEK293T cells and packaged with VSVG-coats using established methods ...
-
bioRxiv - Microbiology 2021Quote: ... highly synchronized infected RBCs were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Cell Biology 2021Quote: ... Streptavidin-conjugated Yellow-Green latex beads (2 μm diameter, 5 x 108 beads/preparation, Polysciences) were washed with 1% BSA in PBS and incubated with Biotin-SP (long spacer)-conjugated Fab fragments of goat-anti-mouse IgG (H+L ...
-
bioRxiv - Cell Biology 2022Quote: ... 9 µg transfer vector and 2 µg pVSV-G using 60 µl linear PEI (Polysciences). Medium was exchanged 6-8 hours post-transfection and harvested after another 48 hours ...
-
bioRxiv - Physiology 2023Quote: ... Sections were picked up on 1 x 2-mm formvar-coated copper slot grids (Polysciences) and further stained with uranyl acetate followed by lead citrate ...
-
bioRxiv - Neuroscience 2022Quote: ... 4.1 µg of VSVG and 110 µL of Polyethylenimine (1 µg/µL; Polysciences, 23966-2). This solution was incubated for 10 min at room temperature ...
-
bioRxiv - Biochemistry 2023Quote: ... bacmid (1 µg/mL culture volume) was mixed with 2 µg PEI 25K (Polysciences, Inc.) per µg bacmid in 200 µL warm PBS and incubated at RT for 30 mins ...
-
bioRxiv - Cell Biology 2019Quote: ... 500 ng DNA (per well of a 12-well plate) or 1500 ng DNA (per well of a 6-well plate) using polyethylenimine (PEI, Polysciences Inc., dissolved at 1 mg/ml in ethanol). Transfection mixtures were made in Optimem using a 1:3 ratio (μg:μl ...
-
bioRxiv - Synthetic Biology 2019Quote: ... A master stock of PEI was made by dissolving linear PEI (Polysciences Cat. No. 23966-2) in deionized water at a concentration of 0.323g/L ...
-
bioRxiv - Bioengineering 2021Quote: ... 1 mg/mL plasmid DNA was mixed with 2 mg/mL linear 25 kDa polyethyleneimine (Polysciences) and transfected in OptiPRO SFM medium (4% final volume) ...
-
bioRxiv - Microbiology 2023Quote: ... At least 1×106 cells were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100 mM sodium cacodylate buffer pH 7.2 for 1 h at room temperature and subsequently incubated to 4 °C overnight ...
-
bioRxiv - Cell Biology 2023Quote: ... plasmids were generally transfected at 50-60% of confluency using PEI (polyethyleneimine, Polysciences Inc #23966-2)/ Lipofectamine LTX (Invitrogen #15338100 ...
-
bioRxiv - Microbiology 2024Quote: ... cells were harvested by centrifugation and fixed by the addition 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc.) in 100 mM sodium cacodylate buffer (pH 7.2 ...
-
bioRxiv - Cell Biology 2020Quote: RPE1 cells were transfected with PX458 vector with specific BBS sgRNA using polyethylenimine (Polysciences, Inc., 23966-2). After 48 h ...
-
bioRxiv - Bioengineering 2021Quote: ... 1 uL (or 1.5 uL for target-binding experiments) of 1 mg/mL PEI (Polysciences, 24765-2) dissolved in water was added to DNA in media and vortexed for 10 seconds ...
-
bioRxiv - Biochemistry 2020Quote: ... HEK 293T cells were transiently transfected with pLVX-IRES-Puro-WDR5 plasmid by PEI (Polysciences, 23966-2) according to the manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2021Quote: ... followed by 10 mins incubation with 1 mL of 2 mg/mL Polyethylenimine (PEI) (Polysciences, POL23966-1). As next step ...
-
bioRxiv - Immunology 2020Quote: Peeled dermis and epidermis sheets were cut to 1 cm2 and fixed in 2% formaldehyde (Polysciences, 18814) and 30% sucrose in PBS for 24 hours at 4°C ...
-
bioRxiv - Cell Biology 2020Quote: ... in a ratio of 3:2:1 using 1 mg/ml polyethylenimine (Cat#23966-1, Polysciences, Inc.). Retrovirus was harvested from the medium 48 h post-transfection ...
-
bioRxiv - Immunology 2022Quote: ... HEK293T cells were transfected with 5μg of SARS-CoV-2 spike plasmids using PEI-MAX 40,000 (Polysciences) and incubated for 2 days at 37°C ...
-
bioRxiv - Microbiology 2022Quote: ... 2 μg pcDNA3.1- hsa_circ_0001400 of plasmids was transfected to 2×106 cells with 12 μl Transporter 5 (Polysciences) lipofection reagent and 1 ml Opti-MemI in 10 ml DMEM ...
-
bioRxiv - Microbiology 2023Quote: ... and 2 μg plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Molecular Biology 2022Quote: ... were transfected with 1 μg ml-1 DNA using 2-fold excess of linear polyethylenimine (PEI; Polysciences), pre-incubated for 15 min in Optimem medium (Gibco) ...
-
bioRxiv - Neuroscience 2023Quote: ... 4 µL FastBlue (FB; 2% in sterile PBS; CAS# 73819-41-7; Polysciences Inc., Warrington, PA USA) per paw was then slowly injected ...
-
bioRxiv - Immunology 2023Quote: ... Cells were transfected with 1 μg/ml DNA using 2-fold excess of linear polyethylenimine (PEI; Polysciences). Conditioned medium containing the secreted recombinant protein was collected 4 days post transfection and filtered ...
-
bioRxiv - Bioengineering 2023Quote: ... Transient transfection mixtures were created by mixing 2 µg of plasmid mixture with polyethyleneimine (PEI-MAX, Polysciences) at 4 μg of polyethyleneimine per microgram of DNA ...
-
bioRxiv - Cell Biology 2019Quote: ... and 500 µL of the melted agarose was supplemented with 15 µL of 2-µm polystyrene beads (Polysciences). Twenty µL each of the FP and agarose/beads solutions were mixed thoroughly ...
-
bioRxiv - Genetics 2019Quote: ... at a weight ratio of 4:3:2 using 54 µL PEI (Polysciences, 24765-1, 1 µg/µl). We changed the medium after 4-6 hours of incubation at 37 °C and 5% CO2 ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were transfected with 2 µg total DNA and 7.35 µl polyethylenimine HCl MAX transfection reagent (Polysciences, Inc). Wells co-transfected with mClover3-TDPΔNLS and HSP104 variants received 1 µg of each plasmid ...
-
Dimeric prion protein ligand activates Adgrg6 but does not rescue myelinopathy of PrP-deficient micebioRxiv - Neuroscience 2020Quote: ... 1 μg of plasmid and 2 μl of 40 kD linear polyethyleneimine (1 mg/ml, Polysciences, 24765-1) were used per milliliter of cells ...
-
bioRxiv - Cell Biology 2021Quote: ... cells were transfected with 1 μg/mL of each expression vector using 2 μg/mL Polyethyleneimine “MAX” (PolySciences) (Hirayama et al. ...
-
bioRxiv - Microbiology 2021Quote: ... 1 cm catheter with biofilm formed on inside surface was fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc.) in 100 mM sodium cacodylate buffer (pH 7.2 ...
-
bioRxiv - Microbiology 2021Quote: ... spores were harvested in KK2 buffer and fixed with 2% paraformaldehyde with 2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100 mM cacodylate buffer (pH 7.2 ...
-
bioRxiv - Bioengineering 2021Quote: ... Plasmid DNA (1 mg mL-1) was mixed with linear 25 kDa polyethyleneimine (2 mg mL-1; Polysciences) and co-transfected in OptiPRO SFM medium (4% final concentration ...
-
bioRxiv - Cell Biology 2020Quote: ... Live animals were immobilized with 0.01% tetramisole and 0.1% tricaine in M9 buffer and mounted on 2% agarose pads or with 0.05 μm Polybead microspheres (Polysciences) diluted 1:2 in water and mounted on 5% agarose pads ...
-
bioRxiv - Developmental Biology 2019Quote: ... and triple transfected into 10 15-cm plates of HEK293T cells using PEI transfection reagent (Polysciences, 23966- 2). 60 h after transfection ...
-
bioRxiv - Synthetic Biology 2022Quote: Worms were immobilized by 0.5 M NaN3 treatment (Figs. 1 and 2) or polystyrene nanoparticles (2.5% by volume, 0.1 μm diameter, Polysciences) (Figs ...
-
bioRxiv - Molecular Biology 2022Quote: ... 293T media was changed and the cells were transfected using 1mg/ml of polyethylenimine (PEI) (Polysciences, 23966-2).
-
bioRxiv - Neuroscience 2023Quote: ... and heparin (20U/ml) for 2 min at 35°C followed by 0.15M cacodylate buffer containing 2.5% glutaraldehyde (Polysciences), 2% formaldehyde (Fisher Scientific ...
-
bioRxiv - Neuroscience 2023Quote: ... and heparin (20 U/ml) for 2 min at 35°C followed by 0.15 M cacodylate buffer containing 2.5% glutaraldehyde (Polysciences), 2% paraformaldehyde (Fisher Scientific ...
-
bioRxiv - Immunology 2023Quote: ... and finally 2 washes in dH2O prior to mounting on glass slides with Mowiol 4-88 (Polysciences Inc.). Mounting medium was allowed to harden overnight ...
-
bioRxiv - Immunology 2023Quote: ... 4µg pMDG.2 plasmid and 4µg psPAX plasmid by using the transfection reagent Polyethylenimine (PEI) (Polysciences #23966-100) at a PEI:DNA ratio of 4:1 ...
-
bioRxiv - Immunology 2022Quote: ... HEK293E cells were transfected at a density of 106 cells/mL using 0.5 mg/mL of pTT3-RBD-HISAVI DNA and 2 mg/mL filter sterilized pH 7.0 Polyethylenimine (PEI) MAX (40,000 MW, Polysciences). Six days later ...
-
bioRxiv - Neuroscience 2023Quote: ... This was followed by 2 minutes incubation of the slices in 0.15M cacodylate buffer containing 2.5% glutaraldehyde (Polysciences). rinsed 5 × 2 min in chilled buffer ...
-
bioRxiv - Cell Biology 2022Quote: ... Whole larva were then mounted between a 2% M9 agarose pad and coverslip in M9 containing 0.1μm polystyrene beads (Polysciences, Inc.) and 10 mM Levamisole to induce worm paralysis (Reich et al. ...