Labshake search
Citations for Polysciences :
1 - 50 of 955 citations for 4 2 Hydroxy 1 Methoxyethyl 1 2 Benzenediol since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: ... in a ratio of 4:2:1 using polyethylenimine (PEI) (Cat#23966-1, Polysciences, Inc.) (PEI:DNA mass ratio 3:1) ...
-
bioRxiv - Cell Biology 2024Quote: ... packaging vectors at a ratio of 4:3:1 using polyethyleneimine (PEI, Polysciences, #23966-2). Virus-containing medium was collected at 48 and 72 hours post-transfection ...
-
bioRxiv - Cancer Biology 2021Quote: ... at a ratio of 2:2:1 using polyethylenimine (Polysciences, Warrington, PA). After 18 hours of transduction ...
-
bioRxiv - Bioengineering 2022Quote: ... A concentration of 2 μg mL-1 plasmid DNA and 2 μg mL-1 plasmid DNA linear 25kDa polyethyleneimine (Polysciences) dissolved in OptiPRO serum free medium (Thermo Fisher ...
-
bioRxiv - Synthetic Biology 2022Quote: ... were transfected with pHelper, pRepCap and pTransgene (2:1:1 ratio, 2 μg DNA per million cells) using Transport 5 transfection reagent (Polysciences) with a 2:1 PEI:DNA ratio ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... and the plasmids for G protein activation (the ratio of receptor/Gα/Gβ/Gγ was 4/1/2/8) using linear polyethyleneimine (PEI, Polysciences, 3:1 PEI:DNA ratio) (65 ...
-
Spatiotemporal proteomics reveals the biosynthetic lysosomal membrane protein interactome in neuronsbioRxiv - Cell Biology 2024Quote: ... packaging vector psPAX2 and envelope vector pMD2.G with a ratio of 4:2:1 using PEI Max (Polysciences) according to standard protocols with a 3:1 PEI Max:DNA ratio for 6 to 9 h ...
-
bioRxiv - Cell Biology 2020Quote: ... in a ratio of 3:2:1 using 1 mg/ml polyethylenimine (Cat#23966-1, Polysciences, Inc.). Retrovirus was harvested from the medium 48 h post-transfection ...
-
bioRxiv - Molecular Biology 2021Quote: ... 2 μl polyethylenimine (PEI) 25K (1mg/ml; Polysciences, 23966-1) per μg of plasmid DNA were mixed with pre-warmed Opti-MEM media (ThermoFisher Scientific ...
-
bioRxiv - Neuroscience 2024Quote: ... helper plasmid in a 1:4:2 ratio by weight for a total of 40 µg mixed with PEI (40K MW #24765 Polysciences) in DPBS (Invitrogen 14190144) ...
-
Dimeric prion protein ligand activates Adgrg6 but does not rescue myelinopathy of PrP-deficient micebioRxiv - Neuroscience 2020Quote: ... 1 μg of plasmid and 2 μl of 40 kD linear polyethyleneimine (1 mg/ml, Polysciences, 24765-1) were used per milliliter of cells ...
-
bioRxiv - Bioengineering 2021Quote: ... Plasmid DNA (1 mg mL-1) was mixed with linear 25 kDa polyethyleneimine (2 mg mL-1; Polysciences) and co-transfected in OptiPRO SFM medium (4% final concentration ...
-
bioRxiv - Molecular Biology 2024Quote: ... at a 2:1:1 ratio using 3 μg 25 kDa linear polyethylenimine (PEI) (Polysciences Inc.) per μg DNA ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were then transfected with 2 µg of GFP-tagged construct and 2 µg of mCherry using a 3:1 ratio of PEI MAX (Polysciences) in Opti-MEM (Thermo Fisher) ...
-
bioRxiv - Bioengineering 2021Quote: ... 1 uL (or 1.5 uL for target-binding experiments) of 1 mg/mL PEI (Polysciences, 24765-2) dissolved in water was added to DNA in media and vortexed for 10 seconds ...
-
bioRxiv - Cell Biology 2021Quote: ... followed by 10 mins incubation with 1 mL of 2 mg/mL Polyethylenimine (PEI) (Polysciences, POL23966-1). As next step ...
-
bioRxiv - Molecular Biology 2022Quote: ... were transfected with 1 μg ml-1 DNA using 2-fold excess of linear polyethylenimine (PEI; Polysciences), pre-incubated for 15 min in Optimem medium (Gibco) ...
-
bioRxiv - Neuroscience 2021Quote: ... neurons were stained with 1 mL of 2% uranyl acetate (Polysciences #21447-25) in water for 30 min at room temperature and then briefly washed with 50% ethanol (Pharmco #111000200 ...
-
bioRxiv - Developmental Biology 2020Quote: ... 1 μg/μL PEI (Polyethylenimine HCl MAX Linear MW 40000 (PolySciences, 24765–2)) and 1 μg/ μL DNA (3:1 ...
-
bioRxiv - Biochemistry 2023Quote: ... 15 μl of 1 mg/ml linear Polyethylenimine (PEI; Polysciences, Inc, 24765-2) and 1-2 µg of each plasmid ...
-
bioRxiv - Neuroscience 2022Quote: ... HEK293T cells were transfected using polyethylenimine (PEI) (Polysciences, 23966-2, 1 mg/mL) and 3rd generation lentivirus packaging vectors (pMDLg ...
-
bioRxiv - Molecular Biology 2024Quote: ... 15 μl of 1 mg/ml linear Polyethylenimine (PEI; Polysciences, Inc, 24765-2) and 1–2 μg of each plasmid ...
-
bioRxiv - Biophysics 2021Quote: ... ~2 mg plasmids premixed with 4 mg linear polyethylenimines (PEIs) (Polysciences, Inc) in 45 mL fresh medium for 15 min ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... at a 2:1:1 ratio in HEK293T cells using 3 μg polyethylenimine (25 kDa linear, Polysciences, Warrington, USA) per μg plasmid DNA ...
-
bioRxiv - Molecular Biology 2022Quote: A stock solution of 1 mg / ml linear Polyethylenimine (PEI; Polysciences, Inc 24765-2) was prepared in a buffer containing 25 mM Hepes ...
-
bioRxiv - Neuroscience 2021Quote: ... Sections were picked up onto 1×2 mm formvar coated copper slot grids (Polysciences), and further stained with uranyl acetate followed by lead citrate ...
-
bioRxiv - Cancer Biology 2024Quote: ... The transfection was performed accordingly: 2 μl polyethylenimine (PEI) 25K (1 mg/ml; Polysciences) was mixed with each μg of plasmid in Opti-MEM medium (Thermo Fisher Scientific ...
-
bioRxiv - Physiology 2020Quote: ... were transiently co-transfected with either A1R-Nluc or A3R-Nluc and β-arrestin2-YFP (total 2 μg, at a 1:6 ratio) using polyethyleneimine (PEI, 1 mg/ml, MW = 25,000 g/mol) (Polysciences Inc) at a DNA:PEI ratio of 1:6 (w/v) ...
-
bioRxiv - Cell Biology 2020Quote: Third-generation VSV.G pseudotyped HIV-1 lentiviruses were produced by polyethylenimine (PEI, Polysciences #23966-2)-transfection of HEK293T cells and packaged with VSVG-coats using established methods ...
-
bioRxiv - Neuroscience 2022Quote: ... 4.1 µg of VSVG and 110 µL of Polyethylenimine (1 µg/µL; Polysciences, 23966-2). This solution was incubated for 10 min at room temperature ...
-
bioRxiv - Biochemistry 2023Quote: ... bacmid (1 µg/mL culture volume) was mixed with 2 µg PEI 25K (Polysciences, Inc.) per µg bacmid in 200 µL warm PBS and incubated at RT for 30 mins ...
-
bioRxiv - Physiology 2023Quote: ... Sections were picked up on 1 x 2-mm formvar-coated copper slot grids (Polysciences) and further stained with uranyl acetate followed by lead citrate ...
-
bioRxiv - Physiology 2022Quote: ... animals were mounted on 2 % agarose dry pads with 4 % polystyrene beads (Polybeads, Polysciences) in M9 buffer ...
-
bioRxiv - Molecular Biology 2021Quote: ... Transient transfection of the cells was performed at a cell density of approximately 1.7×106 cells/mL culture volume using a total of 1 μg of plasmid DNA and 2 μg of linear 40-kDa PEI (Polysciences, 24765-1) per mL culture volume ...
-
Aromatase in adipose tissue exerts an osteoprotective function in male mice via phosphate regulationbioRxiv - Physiology 2024Quote: ... The decalcified tibiae were immersed in a 1:1 mixture of 5% potassium dichromate and 2% osmium tetroxide (23310-10, Polysciences, Inc., USA) for 48 h and stained ...
-
bioRxiv - Bioengineering 2021Quote: ... 1 mg/mL plasmid DNA was mixed with 2 mg/mL linear 25 kDa polyethyleneimine (Polysciences) and transfected in OptiPRO SFM medium (4% final volume) ...
-
bioRxiv - Microbiology 2023Quote: ... At least 1×106 cells were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100 mM sodium cacodylate buffer pH 7.2 for 1 h at room temperature and subsequently incubated to 4 °C overnight ...
-
bioRxiv - Developmental Biology 2023Quote: ... and resuspended in 2 ml 2% PFA (Polysciences, Inc., 18814). After 30 min incubation at room temperature (RT) ...
-
bioRxiv - Immunology 2020Quote: Peeled dermis and epidermis sheets were cut to 1 cm2 and fixed in 2% formaldehyde (Polysciences, 18814) and 30% sucrose in PBS for 24 hours at 4°C ...
-
bioRxiv - Microbiology 2023Quote: ... and 2 μg plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Immunology 2023Quote: ... Cells were transfected with 1 μg/ml DNA using 2-fold excess of linear polyethylenimine (PEI; Polysciences). Conditioned medium containing the secreted recombinant protein was collected 4 days post transfection and filtered ...
-
bioRxiv - Biochemistry 2024Quote: ... 1 mg of plasmids were pre-incubated with 2 mg of 40-kDa linear polyethylenimine (PEI) (Polysciences) in 25 ml of Opti-MEM™ (Gibco ...
-
bioRxiv - Bioengineering 2023Quote: ... cells were fixed with 0.2ml of 2% PFA + 2% glutaraldehyde (PolySciences) per well and subsequently stained with 0.2ml of crystal violet solution (8% crystal violet + 20% ethanol in ddH2O) ...
-
bioRxiv - Cell Biology 2022Quote: ... Bones were then washed for 10 minutes in PBS (3 times) and stained with a 1:1 mixture of 2% aqueous osmium tetroxide (cat# 23310-10, Polysciences, Inc., Warrington, PA, USA) and 5% potassium dichromate for 48 hours ...
-
bioRxiv - Neuroscience 2024Quote: ... A Hamilton syringe with a 30g needle attached was inserted through the patella tendon at a depth of 2-2.5 mm to deliver the retrograde tracer fast blue (FB; 2 μl 2% in H2O; Polysciences) into the articular space ...
-
bioRxiv - Cell Biology 2021Quote: ... cells were transfected with 1 μg/mL of each expression vector using 2 μg/mL Polyethyleneimine “MAX” (PolySciences) (Hirayama et al. ...
-
bioRxiv - Microbiology 2021Quote: ... 1 cm catheter with biofilm formed on inside surface was fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc.) in 100 mM sodium cacodylate buffer (pH 7.2 ...
-
bioRxiv - Synthetic Biology 2022Quote: Worms were immobilized by 0.5 M NaN3 treatment (Figs. 1 and 2) or polystyrene nanoparticles (2.5% by volume, 0.1 μm diameter, Polysciences) (Figs ...
-
bioRxiv - Cell Biology 2022Quote: ... Polyethylenimine (Polysciences, 23966-2), Opti-MEM™ (GIBCO ...
-
bioRxiv - Neuroscience 2023Quote: ... 4 µL FastBlue (FB; 2% in sterile PBS; CAS# 73819-41-7; Polysciences Inc., Warrington, PA USA) per paw was then slowly injected ...