Labshake search
Citations for Polysciences :
701 - 750 of 884 citations for 2 Bromo 1 5 bromofuran 2 yl ethanone since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2024Quote: ... 0.5 mM spermidine and 1× protease inhibitor) with activated Concanavalin A Magnetic Beads (Polysciences, 86057-3) for 10 mins at RT ...
-
bioRxiv - Immunology 2024Quote: ... Four milliliters of PEI MAX® (Transfection Grade Linear Polyethylenimine Hydrochloride, MW 40,000, Polysciences, 24765-1) at 1 mg/mL was added ...
-
bioRxiv - Neuroscience 2024Quote: ... which was then supplemented with 150 µl of 1 mg/mL Polyethylenimine (PEI; Polysciences Cat#23966), incubated for 10 minutes and then added to a single 15 cm plate of fully confluent cells ...
-
bioRxiv - Immunology 2021Quote: ... DNA transfections were performed using polyethylenimine (PEI) (1 mg/mL, linear, 25 kDa; Polysciences, Warrington, FL, USA) at a 3:1 ratio of PEI to DNA (w/w ...
-
bioRxiv - Neuroscience 2021Quote: ... the tissues were rinsed twice in propylene oxide for 30 min each (Polysciences, Inc., cat# 00236–1). This was followed by incubation on a mixer at room temperature overnight in an approximately 1 mL mixture of 1 part propylene oxide and 1 part Polybed resin solution (Poly/Bed® 812 Embedding Media ...
-
bioRxiv - Neuroscience 2021Quote: ... mixed with the transfection reagent polyethylenimine (PEI) hydrochloride (PEI Max, 24765-1, Polysciences, Inc., Warrington, PA, USA) at a 1:2 ratio (W/V) ...
-
bioRxiv - Cancer Biology 2020Quote: ... DNA was added at a final concentration of 0.675 μg/mio cells and polyethylenimine (Polysciences, #23966-1) was added to a final concentration of 0.01 mg/mL ...
-
bioRxiv - Cell Biology 2022Quote: ... HEK293T cells were incubated using 1 mg/mL of Polyethylenimine (PEI, Linear, MW 25000, Polysciences, PA, USA) at a ratio of 1:6 (DNA:PEI) ...
-
bioRxiv - Microbiology 2022Quote: ... and 500 ng plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Immunology 2022Quote: ... and mixed with 20 μl IMDM medium containing 1.2 μl of 1 mg/mL polyethylenimine (PEI, Polysciences). Following a 20 min incubation step at room temperature ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were washed in phosphate buffer and post-fixed in 1% osmium tetroxide (Polysciences Inc., Warrington, PA) for 1 hr ...
-
bioRxiv - Bioengineering 2020Quote: ... After washing with acetic acid (1%, Fluka) samples were incubated with safranin O (0.1%, 15 min, Polysciences) to stain proteoglycans in red ...
-
bioRxiv - Microbiology 2021Quote: ... The re-circularized genome was transfected into 293TT cells with PEI max transfection reagent (Polysciences, 24765-1). Progeny viral particles were purified on a linear cesium chloride gradient and titered as described previously (27 ...
-
bioRxiv - Cell Biology 2021Quote: ... The entire intestine was dissected out and fixed in 1× PBS plus 8% EM-grade paraformaldehyde (Polysciences) for 1 h ...
-
bioRxiv - Developmental Biology 2021Quote: ... Samples were incubated in 50:50 mixture of methanol and JB4 resin (Polysciences, 00226-1, GMBH, Germany) overnight ...
-
bioRxiv - Microbiology 2022Quote: ... and 500 ng plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Microbiology 2022Quote: ... and 500 ng plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Molecular Biology 2023Quote: ... were purchased from Sigma Aldrich while PSS of Mw = 1 000 (PSS_5) and Mw = 8 890 (Mw/Mn = 1.09) (PSS_43) were bought from Polysciences and Scientific Polymer Products Inc. ...
-
bioRxiv - Microbiology 2023Quote: ... and 500 ng plasmids expressing parental S or its derivatives using PEI Max (Polysciences, Cat# 24765-1) or TransIT-293 (Takara ...
-
bioRxiv - Bioengineering 2024Quote: ... 150,000 cells/mL with 1 v/V% 500 nm fluorescent beads (Floresbrite YG carboxylate beads, Polysciences, Inc.) were encapsulated within each hydrogel on a Nunc glass bottom dish (Nunc Glass ...
-
bioRxiv - Neuroscience 2022Quote: To identify sensory neurons innervating the knee joint retrograde labeling with Fast Blue (FB, #17740-1, Polysciences) was performed ...
-
bioRxiv - Neuroscience 2024Quote: ... Ten 15-cm culture dishes with 80% confluency were transfected using 6.8 μM polyethyleneimine (Polysciences, #24765-1), 70 µg AAV transgene plasmid (pAAV-EF1a-GCaMP6s-WPRE-pGHpA ...
-
bioRxiv - Biophysics 2024Quote: ... the cells (50% confluency) were transfected with 0.5 µg·well-1 plasmid DNA using polyethyleneimine (PEI Max, Polysciences) and incubated for 16 h at 37 °C in 5% CO2 ...
-
bioRxiv - Biophysics 2024Quote: ... 100 µg of plasmid DNA was incubated with 300 µg of polyethylenimine (PEI 25,000) (Polysciences, 23966-1) for 30 min at room temperature ...
-
bioRxiv - Synthetic Biology 2024Quote: Transient transfection was performed using polyethylenimine (PEI) (Polysciences, 23966, prepared as a .323 g l-1 stock). For each transfected well of a 24-well plate ...
-
bioRxiv - Biophysics 2024Quote: ... A total of 10 mL (1 mg/mL in PBS) of PEI Max 40 kDa (Polysciences Inc.) was added to the DNA and incubated for 20 min at room temperature ...
-
bioRxiv - Molecular Biology 2020Quote: ... HEK293FT cells were transfected with the lentiviral vector pCLTs together with the packaging plasmids pCMV-VSVG-RSV-Rev (addgene) and pCAG-HIVgp (addgene) at a 1:0.5:0.5 ratio using PEI Max reagent (Polysciences) according to the Manufacturer’s instructions ...
-
bioRxiv - Microbiology 2021Quote: ... Cells transfected with 1 µg of plasmids containing a gene of interest (Table 4) using polyethylenimine (PEI, Polysciences). 4 hours post transfection ...
-
bioRxiv - Developmental Biology 2021Quote: For sectioning embryos in 100% methanol were mounted in JB4 plastic sectioning medium (Polysciences cat. no 00226-1). Dehydrated samples were infiltrated with 10 ml JB4 solution A plus catalyst for two days ...
-
bioRxiv - Biophysics 2021Quote: ... cells were transfected using Env-deficient HIV-1 backbone plasmid pSG3ΔEnv (NIH ARRRP) and 25 kDa PEI (Polysciences) as a transfection reagent ...
-
bioRxiv - Microbiology 2021Quote: ... Cells were then transfected with 67.5 µg of polyethylenimine (PEI) Max 40,000 (Polysciences, Inc, Cat. No. 24765-1) in complex with 3.15 µg of plasmid encoding a spike variant ...
-
bioRxiv - Microbiology 2020Quote: ... Then cells were transiently transfected with 2mg expression plasmid per 1 liter using the Polyethylenimine (PEI) MAX (Polysciences) at a density of 1.0 x 106 cells/ml in fresh Union 293 medium ...
-
bioRxiv - Microbiology 2021Quote: ... Samples were washed in sodium cacodylate buffer at room temperature and postfixed in 1% osmium tetroxide (Polysciences Inc.) for 1 h ...
-
bioRxiv - Biophysics 2021Quote: ... For traction force microscope gels were manufactured as above by additioning 0.2 μm fluorescent beads (1:125; Polysciences). Gels were washed in 70% Ethanol and rinsed extensively in PBS after which transfected cells were plated ...
-
bioRxiv - Immunology 2020Quote: ... 1 μg of plasmid DNA was mixed with 4 μg of 25,000-molecular-weight polyethylenimine (PEI; PolySciences Inc.) in 66.67 μl Opti-MEM cell culture medium (Gibco) ...
-
bioRxiv - Immunology 2020Quote: ... pEE12.4-RBD-SpyTag-Histag plasmids were transfected with PEI (PEI MAX-Transfection Grade LinearPolyethylenimine Hydrochloride, Polysciences 24765-1) into 293F cells ...
-
bioRxiv - Neuroscience 2021Quote: ... worms were fed a 50% dilution of a 2.5% weight by volume (4.55 x 1010 particles per mL) solution of 1 µm diameter polystyrene beads (Polysciences, Inc ...
-
bioRxiv - Biophysics 2021Quote: ... Transfection solution was prepared by combining 20 μL (per dish, hereafter) of polyethylenimine solution (Polysciences; 1 mg/mL) and a plasmid mixture consisting of 500 ng Lg-βarr1 or Lg-βarr2 and 1μg μOR-Sm in 1 mL of Opti-MEM (Thermo Fisher Scientific) ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were then transfected with 67.5 μg of polyethyleneimine (PEI) Max 40,000 (Polysciences, Inc, Cat. No. 24765-1) in complex with 3.15 μg of plasmid encoding a spike variant ...
-
bioRxiv - Microbiology 2023Quote: ... Samples were washed in sodium cacodylate buffer at room temperature and postfixed in 1% osmium tetroxide (Polysciences Inc.) for 1 h ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Cells were transfected using a polyethylenimine (PEI) reagent (2.5 µl of 1 mg/ml per well hereafter; Polysciences) with these UTS2R plasmids (100 ng per well hereafter) ...
-
bioRxiv - Biophysics 2024Quote: ... Cells were transfected using a polyethylenimine (PEI) agent (10 μl of 1 mg/ml per dish hereafter; Polysciences) with pCAG plasmids encoding human A1R ...
-
bioRxiv - Cell Biology 2022Quote: ... GST-ATG9 (828-839)-ATG101 were co-transfected with ATG13 (1-197) using the polyethylenimine (PEI)-MAX (Polysciences) transfection system ...
-
bioRxiv - Cancer Biology 2022Quote: ... and 12 μg of pLKO-shRNA-puro using 63 μL of polyethylenimine (PEI – 1 μg/μL; Polysciences - 24765) mixed in 750 μL of 10 mM HEPES pH 7.4 and 150 mM NaCl in water ...
-
bioRxiv - Physiology 2022Quote: ... 16 μg AAV-U6-sgRNA-TBG-Cre plasmid and 144 μl of 1 mg/ml Polyetherimide (PEI) (Polysciences) was mixed in 9 ml OptiMEM (Thermo) ...
-
bioRxiv - Biophysics 2023Quote: ... Negative staining was performed using 1% uranyl acetate (98% uranyl acetate; ACS Reagent, Polysciences Inc. Warrington, PA, USA) solution for 20 s ...
-
bioRxiv - Cancer Biology 2023Quote: ... The cells were transfected with 121.6 μL of 1 mg/mL of linear Polyethylenimine (PEI; MW 25,000; Polysciences) and 30.4 μg of plasmid DNA diluted in Opti-MEM (Gibco) ...
-
bioRxiv - Immunology 2023Quote: ... 1.2 μg of DNA was mixed with 2.4 μL of 1 mg/mL polyethylenimine (linear PEI, MW 25,000, Polysciences) in one tenth of the final culture volume of medium ...
-
bioRxiv - Neuroscience 2024Quote: ... 5.7μg of construct DNA was transfected with 22.8μg of capsid plasmid and 11.45μg of pADDeltaF6 using polyethylenimine 25K MW (Polysciences, 23966-1). Collection of cells and media for AAV harvesting began 72 hours after transfection ...
-
bioRxiv - Microbiology 2024Quote: ... reference beads (1 μm Fluoresbrite® BB Carboxylate Microspheres; Ref. 17458, Lot. 659681; Polysciences, Inc., Warrington, PA, USA) were added as an internal sample standard ...