Labshake search
Citations for Molecular Devices :
51 - 100 of 200 citations for Recombinant Human Collagen Type II Alpha 1 His tagged since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... RMP was sampled every 1 s using Clampfit 10.7 (Molecular Devices) and binned into 30 s increments ...
-
bioRxiv - Neuroscience 2019Quote: ... filtered at 1-5 kHz and digitalized using a MultiClamp 700B (Molecular Devices). The sampling frequency was either 20 or 40 kHz ...
-
bioRxiv - Bioengineering 2023Quote: ... which was inserted in a micropipette holder (1-HL-U, Molecular Devices LLC) fixed on a stereotaxic stage equipped with a motorized linear translation stage (860A motorizer and 460A linear stage ...
-
bioRxiv - Bioengineering 2023Quote: ... filtered at 1 kHz and digitized at 10 kHz (Digidata 1440; Molecular devices). Recordings were made in the outside-out excised patch configuration after gigaseals were obtained and currents were recorded by voltage ramp protocols from −100 to +100mV with and without 10 mM capsaicin addition by perfusion (ALA Scientific VM8 manifold perfusion system).
-
bioRxiv - Neuroscience 2019Quote: ... and digitized at 1 kHz (CyberAmp 380, Digidata 1440A, AxoScope 10 software, Molecular Devices). EEG synchronized video recordings (Logitech Software and Cerberus 4.0 Beta ...
-
bioRxiv - Biophysics 2021Quote: ... Currents were amplified and low-pass filtered at 1 kHz (Axopatch 200B, Molecular Devices), digitized at a sampling rate of 10 kHz (Digidata 1550B ...
-
bioRxiv - Cancer Biology 2022Quote: ... Traces were digitized at 1 kHz using the Digidata 1322A interface (Molecular Devices, USA) using Clampex 9.2 software (Molecular Devices ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 50 Hz low-pass filters and digitization at 1 kHz (Molecular Devices, USA). The stock solutions (1 M ...
-
bioRxiv - Cell Biology 2023Quote: ... 1-ms pulse width) and the acquisition sequence driven by MetaMorph Software (Molecular Devices) or Zeiss Zen2 software at 5 Hz frequency ...
-
bioRxiv - Biophysics 2021Quote: ... Recordings were filtered at 1 kHz and digitized at 10 kHz (Digidata 1440A; Molecular Devices). Pressure application through patch pipettes was performed with a high-speed pressure clamp (ALA Scientific ...
-
bioRxiv - Neuroscience 2020Quote: ... for acquisition (1-10 kHz) by pCLAMP10.2 software (Molecular Devices, LLC, San Jose, CA, USA). Glass recording microelectrodes were filled with aCSF (tip resistance ∼3MΩ ...
-
bioRxiv - Neuroscience 2019Quote: ... filtered at 1 kHz and analyzed offline using pClamp10 software (Molecular Devices, Sunnyvale, CA, USA).
-
bioRxiv - Neuroscience 2019Quote: ... filtered at 1 kHz and analyzed offline using pClamp10 software (Molecular Devices, Sunnyvale, CA, USA).
-
bioRxiv - Neuroscience 2023Quote: ... Recorded currents were filtered at 1 kHz and digitized by a Digidata 1550A (Molecular Devices) digitizer at a sampling rate of 10 kHz ...
-
bioRxiv - Neuroscience 2024Quote: ... Electrical signals were filtered at 1 kHz by a Multiclamp 700B amplifier (Molecular Devices, USA), and digitized by an Axon DigiData 1550A converter with a sampling frequency of 10 kHz ...
-
bioRxiv - Neuroscience 2021Quote: ... whole-cell patch-clamp recordings were performed with an Axopatch 1-D amplifier (Molecular Devices, USA) operated with Clampex 9.2 software and a DigiData 1200 series interface (Molecular Devices ...
-
bioRxiv - Neuroscience 2020Quote: ... The data was low-pass filtered at 1 kHz (Molecular devices DigiData 1440A and Multiclamp 700B). Pipette series resistance and membrane holding current were monitored throughout all recordings to ensure stability of the recording.
-
bioRxiv - Physiology 2022Quote: ... Membrane voltage was obtained by using an Axoclamp 1-D amplifier (Molecular Devices, Sunnyvale, CA, USA) connected to a Digidata 1440A (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... Data were acquired at 5 kHz and filtered at 1 kHz using Multiclamp 700B (Molecular Devices) or Double IPA (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... at a sampling rate of 1 kHz and acquired using Clampex software (v. 10.7, Molecular Devices). To temporally match the EEG/EMG data with two-photon images ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were made every 10 s for 1 hour using an Axopatch 700A amplifier (Molecular Devices) digitized at 10 kHz and filtered at two kHz with Digidata 1440A and pClamp 10.0 software (Molecular Devise).
-
bioRxiv - Biochemistry 2020Quote: ... Cell Signaling Technology) as the primary antibody (1:2000 dilution) and ScanLater anti-rabbit antibody (Molecular Devices) as the secondary antibody (1:5000 dilution) ...
-
bioRxiv - Cell Biology 2021Quote: ... spin-dried (200 g for 1 min) and scanned with a Genpix 4000B microarray scanner (Molecular Devices, made available by EMBL Genomics Core Facility) ...
-
bioRxiv - Neuroscience 2022Quote: ... were filtered at 1 kHz and digitized at 10 kHz with Digidata 1322A interface board (Molecular Devices) to record fEPSPs ...
-
bioRxiv - Biophysics 2021Quote: ... The reference electrode was a grounded Ag/AgCl pellet electrode (1-HLA-003, Molecular devices, California, USA). Borosilicate glass pipettes with filaments (BF150-86-7.5 ...
-
bioRxiv - Biophysics 2021Quote: ... a chlorinated silver wire (0.25 mm in thickness) was used (1-HLA-005, Molecular Devices, California, USA). The electrode was regularly abraded with sandpaper and immersed in commercial bleach solution for about 30 min in order to keep it chlorinated ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were sampled at 1 kHz and recordings were analyzed offline using PClamp10 software (Molecular Devices, USA). Breathing frequency was calculated on a breath-to-breath basis ...
-
bioRxiv - Biophysics 2023Quote: ... Data were filtered at 1–3 kHz and digitized at 20 kHz using pClamp software (Molecular Devices) and a Digidata 1440A digitizer (Axon Instruments) ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were low-pass filtered at 1 kHz and sampled at 10 kHz using Digidata 1440A (Molecular Devices). For mEPSC recordings ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz with the patch-clamp amplifier (Axopatch 1-D, Molecular Devices, Sunnyvale, CA) and sampling rate was adjusted according to the kinetics of membrane current ...
-
bioRxiv - Neuroscience 2022Quote: ... The signal was filtered at 1 kHz and digitized at 10 kHz using Axon Digidata 1550B (Molecular Devices). Recording pipettes (3.5-5 MΩ ...
-
bioRxiv - Cell Biology 2021Quote: ... 36 sites per well were imaged using a Plan-Apochromat 40x objective (Molecular Devices, cat# 1-6300-0297). Automated image analysis was performed using the MetaXpress software (version 6.5.4.532 ...
-
bioRxiv - Biophysics 2020Quote: ... The recording electrode was a chlorinated silver wire (0.25 mm thickness, 1-HLA-005, Molecular Devices, California, USA).
-
bioRxiv - Neuroscience 2021Quote: ... fEPSPs were recorded and filtered (low pass at 1 kHz) with an Axopatch 200A amplifier (Molecular Devices, LLC) and digitized at 10 kHz with an A/D converter (Digidata 1322A ...
-
bioRxiv - Neuroscience 2022Quote: ... The plate was incubated for 1 h at RT and read on an HTRF plate reader (Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... The plate was read within 1 hour after cell lysis using a SpectraMax plate reader (Molecular Devices, CA). Samples were excited at 480nm ...
-
bioRxiv - Developmental Biology 2023Quote: ... which is repeated every 1 h from late E2.5 to E3.5 using a custom Metamorph journal (Molecular Devices). A 60 μm z-stack with a 5 μm step size is acquired before every time lapse to discern TE and ICM cells.
-
bioRxiv - Neuroscience 2023Quote: ... Data were filtered at 1 kHz and digitized at 20 kHz using a 1440A Digidata Digitizer (Molecular Devices). Series-resistance (10-20 MΩ ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The reaction was diluted 1:20 and the absorbance was measured in a spectrophotometer (Spectramax 190, Molecular Devices) in Nunc 96-well plates (ThermoFisher) ...
-
bioRxiv - Biophysics 2021Quote: Recordings containing 1-9 channels were idealized through half-amplitude threshold crossing and analyzed using Clampfit software (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... band-pass filtered (1-3000 Hz) and sampled at 10 kHz with a Digidata 1440A acquisition board (Molecular Devices). Spikes were sorted using Spike 2 software (CED ...
-
bioRxiv - Neuroscience 2019Quote: ... 1 kHz low-pass filter and digital gain at 10 (MultiClamp 700B amplifier, Digidata 1400 digitizer, both Molecular Devices). Results were analyzed with the Clampfit software (Molecular Devices) ...
-
bioRxiv - Genetics 2022Quote: ... Absorbance at 420 nm was measured every minute for 1 hour on a SpectraMax M2 Microplate Reader (Molecular Devices). Measures taken between 20 and 35 minutes (linear range ...
-
bioRxiv - Physiology 2022Quote: BAT SNA was amplified (x 5,000–10,000) and filtered (1–300 Hz) by a CyberAmp 380 amplifier (Molecular Devices). All the physiological variables were digitized and recorded to a personal computer using Spike 2 software (version 7.10 ...
-
bioRxiv - Physiology 2023Quote: ... and the data were sampled at 2 kHz and filtered at 1 kHz using pClamp 10 software (Molecular Devices). Light stimulation was applied using LEDs and a multi-LED driver through the microscope optics (DC4100 ...
-
bioRxiv - Neuroscience 2023Quote: ... BAT SNA was amplified (× 5,000 to 10,000) and filtered (1 to 300 Hz) using a CyberAmp 380 amplifier (Molecular Devices). All the physiological variables were digitized and recorded to a personal computer using Spike2 software (version 7.10 ...
-
bioRxiv - Neuroscience 2024Quote: ... Responses to repetitive 1 s light stimuli were recorded using Axosope 10.7 and analyzed using Clampfit 10.7 software (Molecular Devices) and Igor Pro 6.37 ...
-
bioRxiv - Neuroscience 2021Quote: ... low pas filtered at 1 kHz and digitized at a sampling rate of 20 kHz using Digidata 1440A (Molecular Devices). Data was recorded on a PC using pClamp 10.6 (Molecular Devices ...
-
bioRxiv - Neuroscience 2019Quote: ... Whole-cell patch-clamp recordings were made using a MultiClamp 700B amplifier (1 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 10.3 software (Molecular Devices). Voltage-clamp recordings were made using glass pipets with resistance 3-5 MOhms ...
-
bioRxiv - Neuroscience 2020Quote: ... Data were low-pass filtered at 1 kHz and digitized at 10 kHz with a digitizer (Digidata 1440; Molecular Devices). Series resistance was monitored and cells that displayed > 20% change over the duration of recording were excluded.