Labshake search
Citations for Molecular Devices :
401 - 450 of 867 citations for 7 Chloro 1 3 dihydro 5 phenyl 2H 1 4 benzodiazepin 2 thione since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... or Micro 1401-3 with Expansion ADC12 (CED, Cambridge, UK) at 10 kHz and recorded with Clampex (Molecular Devices) or Spike2 (CED) ...
-
bioRxiv - Neuroscience 2023Quote: ... All data were acquired at 20 kHz and low pass filtered at 3 kHz using pClamp software (Molecular Devices) and corrected for the liquid junction potential (14 mV) ...
-
bioRxiv - Synthetic Biology 2023Quote: ... Cell growth OD600 measurement was checked at frequent time intervals (3–6 h) on SpectraMax M3 spectrophotometer (Molecular Devices). Growth rates (μ ...
-
bioRxiv - Neuroscience 2023Quote: ... Membrane currents and potentials were amplified and low-pass filtered at 3 kHz using Multiclamp 700B amplifier (Molecular Devices), digitized at 10 kHz ...
-
bioRxiv - Neuroscience 2023Quote: ... Currents were recorded in voltage clamp mode at 10 kHz and filtered at 3 kHz (Multiclamp 700b; Molecular Devices). To facilitate the detection of synaptic calcium transients ...
-
bioRxiv - Neuroscience 2020Quote: Spontaneous IPSCs were identified in 5 min recording epochs using Clampfit (version 10.7, Molecular Devices) in conjunction with a template pattern search (generated from examples of sIPSC rise profiles and peak currents recorded from control cultured hippocampal neurons at the same temperature) ...
-
bioRxiv - Biochemistry 2022Quote: ... Fluorescence was measured every 5 s with a SpectraMax Gemini EM Microplate Reader (Molecular Devices) with excitation at 365 nm and emission at 407 nm ...
-
bioRxiv - Neuroscience 2021Quote: ... low-pass filtered at 5 kHz and subsequently analyzed using Clampfit 10.7 Software (Molecular Devices). Linear leak and capacitive currents were subtracted online using the P/4 protocol (20ms I-V protocol ...
-
bioRxiv - Neuroscience 2021Quote: ... filtered 2 kHz and digitized at 10 kHz with Digidata 1440A (Molecular Devices). Excitatory afferent fibers located between the NAc core and cortex dorsal to the anterior commissure were stimulated with bipolar concentric electrode (FHC ...
-
bioRxiv - Cell Biology 2019Quote: ... Fura-2-AM and a 96-well fluorescence plate reader (FlexStationII384, Molecular Devices), controlled by SOFTmax PRO software v5.4.5 ...
-
bioRxiv - Neuroscience 2022Quote: ... and data were digitally filtered at 2 kHz with ClampFit (Molecular Devices, LLC).
-
bioRxiv - Cancer Biology 2023Quote: ... The headstage amplifier was a high impedance 0.0001MU Axon HS-2 (Molecular Devices). Currents were digitized using a ITC018 A/D converter (HEKA Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... filtered to 2 kHz and digitized at 10 kHz (pClamp10 software, Molecular Devices). Data were analyzed using IGOR Pro (Wavemetrics ...
-
bioRxiv - Molecular Biology 2021Quote: ... by 1:20 dilution with a series of commercially available pH buffers (HYDRION) using a SpectraMax-M5 plate reader (Molecular Devices) to read out fluorescence ...
-
bioRxiv - Neuroscience 2022Quote: ... filtered at 3 kHz and digitized at 10 kHz using an EPC-10 patch-clamp amplifier with PatchMaster v2x73 software (batch 1) or MultiClamp 700B amplifier (Molecular Devices) with pClamp 10 software (batch 2) ...
-
bioRxiv - Cell Biology 2019Quote: ... Signal was low-pass filtered at 1 kHz and digitized at 10 kHz with a Digidata 1440A or 1550 (Molecular Devices). Neurons with a series resistance (Rs ...
-
bioRxiv - Developmental Biology 2020Quote: ... A voltage-clamp protocol was employed to record whole-cell currents with and without extracellular divalent cations in response to a voltage ramp from −120 to 60 mV (1 second interval) using an Axopatch 200B amplifier with pCLAMP10 software (Molecular Devices) as previously described [71 ...
-
bioRxiv - Neuroscience 2020Quote: ... The signal for all voltage-clamp recordings was filtered at 1 kHz and digitized at 10 kHz with a digitizer (Molecular Devices). For voltage-clamp recordings ...
-
bioRxiv - Biophysics 2021Quote: ... The reaction was monitored at 650 nm (turbidity due to precipitation of the product) for 1 h at 25 °C using a Spectramax i3 (Molecular Devices). Statistical analysis was performed using unpaired t-test in Prims 9.0.
-
bioRxiv - Synthetic Biology 2021Quote: ... Reactions were monitored at 340 nm for 1 hour (30s per read) using a SpectraMax Plus 384 microplate reader (Molecular Devices). NADH concentrations were determined by its extinction coefficients ...
-
bioRxiv - Microbiology 2020Quote: ... Fluorescence was measured every 60s for 1 hour after addition of virus on a FilterMax F5 multimode microplate reader (Molecular Devices). Enzyme Vmax and Km was calculated using Prism software (GraphPad).
-
bioRxiv - Microbiology 2021Quote: ... 2021.Infected cells were imaged for 72 h with 1 h intervals with a 40x objective with the ImageXpress Micro XL high-content microscope (Molecular Devices). Different parameters ...
-
bioRxiv - Microbiology 2021Quote: ... Protein concentrations were determined using the corresponding extinction coefficient at 280 nm (ExPASy, ProtParam tool) and measured in a 1 ml quartz cuvette (Hellma Analytics) using a SpectraMax M2 spectrophotometer (Molecular Devices). Proteins were long-term stored at -80 °C in 10% glycerol.
-
bioRxiv - Biophysics 2021Quote: ... The analog current signal was low-pass filtered at 1 kHz (Bessel) and digitized at 10 kHz with a Digidata 1550A digitizer (Molecular Devices). Digitized data were recorded on a computer using the software pClamp (Molecular Devices ...
-
bioRxiv - Biophysics 2022Quote: ... Data were filtered at 1-3kHz and digitized at 10kHz using a Digidata 1321A interface board and pCLAMP 10 software (Axon; Molecular Devices). Microelectrode resistances were 0.2–0.8MΩ when filled with 3 M KCl ...
-
bioRxiv - Immunology 2020Quote: ... and the reactions were stopped by adding 1 M H2SO4 before measuring absorbance at 450 nm with a Spectramax Paradigm plate reader (Molecular Devices).
-
bioRxiv - Immunology 2020Quote: ... and the reactions were stopped by adding 1 M H2SO4 before measuring absorbance at 450 nm with a Spectramax Paradigm plate reader (Molecular Devices).
-
bioRxiv - Neuroscience 2021Quote: ... The signal for voltage-clamp recordings was filtered at 1 kHz and digitized at 10 kHz with a digitizer (Molecular Devices). Stimulus generation and data acquisition were performed using pClamp (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... the recorded unit was stimulated by a current pulse of 250ms long (50 % duty cycle, 1-10 nA) sent through the recording electrode by axoClamp 2B (in bridge mode; Molecular Devices). Then ...
-
bioRxiv - Neuroscience 2022Quote: ... Membrane responses to 1 s current injection between 0-700 pA (100 pA increment) were collected using an Axopatch-200B amplifier (Molecular Devices). Paired pulse optogenetic and electrical stimulation (20 Hz every 30 s ...
-
bioRxiv - Cell Biology 2022Quote: ... Data was Bessel filtered online at 1 kHz and single channel currents were analyzed offline using ClampFit analysis module of pCLAMP 10 software (Molecular Devices).
-
bioRxiv - Synthetic Biology 2020Quote: ... Purified proteins were quantified by measuring absorbance at 280 nm in a 1-cm quartz cuvette with a SpectraMax Plus384 microplate spectrophotometer (Molecular Devices), and applying Beer-Lambert’s law using extinction coefficients calculated with the ProtParam tool (https://web.expasy.org/protparam/).
-
bioRxiv - Synthetic Biology 2021Quote: ... Samples were measured via kinetic measurements (1 measurement/min) for a total of 30 minutes at 405 nm using a SpectraMax iD3 spectrophotometer (Molecular Devices).
-
bioRxiv - Microbiology 2020Quote: ... Single cell ionic currents were measured in the perforated patch clamp configuration (100 μgmL−1 amphotericin) at room temperature (21–23 °C) using an IonWorks Quattro instrument (Molecular Devices). The internal solution contained (mM) ...
-
bioRxiv - Immunology 2020Quote: ... The reaction was stopped with 1% HCl and absorbance at 450 nm was read with a SpectraMax plate reader (Molecular Devices). SoftMax Pro v5.3 was used to calculate log area-under-the-curve (AUC ...
-
bioRxiv - Biophysics 2021Quote: ... Signals were filtered at 1 kHz (low-pass) and digitized using a DigiData 1550 with pClamp 10.5 software (Molecular Devices, USA). The sampling rate was 5 kHz ...
-
bioRxiv - Immunology 2022Quote: ... in a clear-bottom black-welled 96 well plate and 330nm/390nm fluorescence readings were obtained after 1 hour using a SpectraMax M2 microplate reader (Molecular Devices). Difference between treatments were assessed via One-Way Anova.
-
bioRxiv - Immunology 2022Quote: ... Cleavage of the 5-FAM/QXL™ 520 labeled elastin was measured in a clear-bottom black-welled 96 well plate and 490nm/520nm fluorescence readings were obtained after 1 hour at 37°C using a SpectraMax M2 microplate reader (Molecular Devices). Difference between treatments were assessed via One-Way Anova.
-
bioRxiv - Biochemistry 2022Quote: ... Reactions were carried out at 37° C for 1 hr and read at 412 nm using a Versamax plate reader (Molecular Devices) in triplicate ...
-
bioRxiv - Immunology 2023Quote: ... Plates were developed for 30 minutes at room temperature before stopping with 100 μL of 1% SDS to read on a SpectraMaxiD3 plate reader (Molecular Devices) for absorbance at 405 nm.
-
bioRxiv - Immunology 2023Quote: ... and the reactions were stopped by adding 1 M H2SO4 before measuring absorbance at 450 nm with a Spectramax Paradigm plate reader (Molecular Devices). Sera from mice immunized with PBS or an irrelevant antigen (DS-Cav1-I53_dn5 ...
-
bioRxiv - Biochemistry 2022Quote: ... Absorbance at 340 nm was measured at RT every 30 seconds for 1 h with a SpectraMax Plus 384 microplate reader (Molecular Devices). Data analysis was done using SoftMax Pro 7.0 and GraphPad Prism 9.3.1 software ...
-
bioRxiv - Cell Biology 2023Quote: ... the hepatocytes were washed 3 times with 1×PBS and were stored in 50 μL per well of 1×PBS prior to imaging on an ImageXpress Micro (Molecular Devices).
-
bioRxiv - Biophysics 2023Quote: ... Negative pressure stimuli were applied using a high-speed pressure clamp apparatus (HSPC-1; ALA Scientific) programmed using the Clampex software (Molecular Devices). Pressure and voltage protocol programming and data acquisition were performed with the PClamp 10 suite (Axon Instruments) ...
-
bioRxiv - Biophysics 2023Quote: ... Negative programmed pressure stimuli were applied using a high-speed pressure clamp apparatus (HSPC-1; ALA Scientific) using the Clampex software (Molecular Devices). Pressure and voltage protocol programming and data acquisition were performed with the PClamp 10 suite (Axon Instruments).
-
bioRxiv - Neuroscience 2023Quote: ... Whole-cell voltage-clamp and current-clamp recordings were amplified and filtered (1 kHz lowpass bassel filter) using Axopatch 200B amplifier (Molecular Devices). Data were acquired using Digidata 1440A digitizer (Molecular Devices ...
-
The spindle protein CKAP2 regulates microtubule dynamics and ensures faithful chromosome segregationbioRxiv - Cell Biology 2023Quote: ... at 500 ms for 1 min with an exposure time of 500 ms and microscope control was executed using MetaMorph (Molecular Devices).
-
bioRxiv - Bioengineering 2024Quote: ... or immunoblotting (for ICAM-1/Lentivirus-transduced HMVECICAM-1hi and LacZ/Lentivirus transduced HMVECICAM-1lo or bioluminescence reader (SpectraMax L, Molecular Devices) (for Luc2+/MSCs) ...
-
bioRxiv - Synthetic Biology 2023Quote: ... Samples were measured via kinetic measurements (1 reading/minute) for a total of 30 minutes at 405 nm using a SpectraMax iD3 spectrophotometer (Molecular Devices) with the Softmax pro software (version 7.0.2)
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... was added at 250 µM to increase worm movement at least 1 hour prior to imaging on an ImageXpress Nano (Molecular Devices). Time lapse recordings were acquired for each well (15 second videos at a rate of 4 frames / second ...