Labshake search
Citations for Molecular Devices :
401 - 450 of 494 citations for 7 Amino 3 phenyl 2 benzopyrone since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2023Quote: ... Dual channel live acquisition was performed using 2 EMCCD cameras (QuantEM Model 512SC, Princeton Instruments) controlled by Metamorph 7.10 software (Molecular Devices). The gain of the EMCCD cameras was kept constant at 600 ...
-
bioRxiv - Neuroscience 2023Quote: ... and data were digitized at 10 kHz and filtered at 1-2 kHz using a 1440A Digidata Digitizer (Molecular Devices). Series and input resistances (10-20 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... the slope of the first 1-2 ms of the fEPSP was obtained using Clampfit software (version 10.6; Molecular Devices) and averaged in 1-min bins ...
-
bioRxiv - Cell Biology 2020Quote: ... incubated for 2 hours with 100 nM Coelenterazine Cp and washed before initiating measurements using a spectrophotometer (SpectraMax M, Molecular Devices) equipped with injectors allowing the detection of luminescence in a kinetic mode.
-
bioRxiv - Neuroscience 2021Quote: ... in time-lapse mode either at 1 fps (for imaging in response to 200-APs stimulation) or 2 fps (for imaging in response to 50-APs stimulation) under the control of MetaMorph software (Molecular Devices). SEP fluorescence was imaged with 470/22 nm excitation and 514/30 nm emission filters ...
-
bioRxiv - Molecular Biology 2021Quote: ... Cells were transfected in glass bottom 96 well plates (3-5 replicate wells per treatment) followed by imaging using a Zeiss Axioskop-2 microscope or an ImageXpress Micro Confocal (Molecular Devices) using a 20X objective (S Plan Fluor ...
-
bioRxiv - Genomics 2020Quote: ... Luciferase activity was measured 48-hours post-transfection with a 2-second integration time on a LMax II 384 Luminometer (Molecular Devices). Background subtracted luminescence values for each SNV were z-scored ...
-
bioRxiv - Cell Biology 2019Quote: ... Signals were recorded at 10 kHz and low-pass filtered at 2 kHz with an Axopatch 200B amplifier and digitized with a Digidata 1440 (Molecular Devices). Recording pipettes were pulled from borosilicate capillary glass (0.86 OD ...
-
bioRxiv - Cell Biology 2019Quote: ... and 2) a Nikon Eclipse 80i microscope using a 100X/1.4NA oil objective lens and Metamorph (Molecular Devices, San Jose, CA). Yeast were grown in SD media to log phase ...
-
bioRxiv - Neuroscience 2020Quote: ... and were digitized off-line at 10 kHz (low-pass filtered at 2 kHz with an 8-pole Bessel filter) using pCLAMP9 software (Molecular Devices).
-
bioRxiv - Neuroscience 2021Quote: ... Light-evoked action potentials from ChR2-mCherry+ neurons in the SC were triggered by a light-pulse train (473 nm, 2 ms, 10 Hz or 20 Hz, 20 mW) synchronized with Clampex 10 data acquisition software (Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... and analog signals were low-pass filtered at 2 kHz and digitized at 10 kHz with a Digidata 1550 interface (Molecular Devices). Clampex (v 11.4 ...
-
bioRxiv - Neuroscience 2021Quote: ... The density and distribution of immunogold particles were quantitatively analyzed on electron micrographs using MetaMorph software (Molecular Devices; n = 2 mice). The density of SIPA1L1 on excitatory nerve terminals and dendritic spines was calculated by measuring the number of immunogold particles ...
-
bioRxiv - Neuroscience 2020Quote: ... Light-evoked action potentials from ChR2-mCherry+ neurons in the SC were triggered by a light-pulse train (473 nm, 2 ms, 10 Hz, 20 mW) synchronized with Clampex 10 data acquisition software (Molecular Devices). Light-evoked postsynaptic currents from SNc neurons were triggered by single light pulses (2 ms ...
-
bioRxiv - Neuroscience 2020Quote: ... a 10 KHz Bessel filter was applied to the data during collection and the data was post hoc filtered at 2 KHz after the recordings using Clampfit 10.3 (Molecular Devices, CA). For evoked currents ...
-
bioRxiv - Neuroscience 2021Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). All measurements were performed with extracellular (EC ...
-
bioRxiv - Cancer Biology 2020Quote: ... Fluorescence intensity values were collected every 2 min during 1h at 500 nm in a SpectraMax M2 microplate reader (Molecular Devices). Activity units were calculated as ...
-
bioRxiv - Neuroscience 2022Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 11 (Molecular Devices). Electrophysiological recordings were extracted using Clampfit (Molecular Devices) ...
-
bioRxiv - Neuroscience 2022Quote: Mechanically activated currents from HEK P1KO cells 2 days after transfection were recorded in whole-cell patch clamp mode using a MultiClamp700A amplifier and DigiData1550 (Molecular Devices) and stored directly and digitized online using pClamp software (version 10.7) ...
-
bioRxiv - Biophysics 2022Quote: ... Absorbance at 405 nm was measured before and after a 1 h or 2 h incubation at room temperature using a microplate reader (SpectraMax 340 PC384; Molecular Devices). Ligand-induced AP-TGF-α release was calculated as described previously.26 Unless otherwise noted ...
-
bioRxiv - Bioengineering 2022Quote: ... The passage of dextran into the basolateral side of the trophoblast layer was monitored every 2 minutes for 12 minutes with a high content microscope (ImageXPress XLS-C; Molecular Devices) in the TRITC and FITC channels ...
-
bioRxiv - Neuroscience 2019Quote: ... The data were low-pass filtered at 2 kHz and digitized at 10 kHz with an A/D converter (Digidata 1322A, Molecular Devices) and stored using a data acquisition program (Clampex version 10 ...
-
bioRxiv - Neuroscience 2019Quote: ... The signal was filtered at 2 kHz and digitized at 20 kHz using an Axon Digidata 1440A analog-to-digital board (Molecular Devices). Recordings were performed from three independent cultures ...
-
A Universal Proximity CRISPR Cas12a Assay for Ultrasensitive Detection of Nucleic Acids and ProteinsbioRxiv - Synthetic Biology 2019Quote: ... Fluorescence was measured immediately after transferring the reaction mixture to a 96-well microplate and kept measuring every 30s for 2 hours at 37 °C using a SpectraMax i3 multi-mode microplate reader (Molecular Devices) with excitation/emission at 485/515 nm.
-
bioRxiv - Neuroscience 2019Quote: ... Signals were low-pass filtered at 2 kHz and sampled at 10-20 kHz with a Digidata 1440A (Molecular Devices LLC), and data were stored on a computer for subsequent off-line analysis ...
-
bioRxiv - Developmental Biology 2019Quote: ... Bioluminescence was followed in real-time for 1 hr at 27 °C and 2 hrs at 37 °C in a Flex Station3 microplate reader (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... digitized at 20 kHz and low-pass Bessel-filtered at 2 kHz with a personal computer running Clampex 11 and a DigiData 1440 (Molecular Devices). Two concurrent channels were captured ...
-
bioRxiv - Physiology 2020Quote: ... and Vm was recorded using sharp microelectrodes backfilled with 2 M KCl (∼150-MΩ tip resistance) connected to an amplifier (AxoClamp 2B, Molecular Devices), data acquisition system (Digidata 1322A ...
-
bioRxiv - Biophysics 2021Quote: ... 10 kHz or by-pass setting and digitized with a Digidata 1550B at a 100 kHz (10 μs bandwidth) or 500 kHz (2 μs bandwidth) sampling rate and recorded using the software pClamp 10 (Molecular Devices). The current trace was analysed using a custom written MATLAB script provided by Prof Joshua B ...
-
bioRxiv - Neuroscience 2021Quote: ... Analog signals were filtered at 2 kHz using the built-in 4-pole Bessel filter of a Multiclamp 700B patch-clamp amplifier (Molecular Devices) in patch mode and digitized at 20 kHz (Digidata 1440A ...
-
bioRxiv - Neuroscience 2020Quote: ... digitized at 10–20 kHz and filtered at 2–5 kHz with a Digidata 1440A analog-to-digital converter (Molecular Devices).
-
bioRxiv - Microbiology 2021Quote: Competitive binding of mAbs to recombinant SARS-CoV-2 RBD with hACE2 was evaluated using the ForteBio Octet HTX instrument (Molecular Devices) as described previously (34) ...
-
bioRxiv - Biophysics 2020Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). All measurements were performed with extracellular (EC ...
-
bioRxiv - Neuroscience 2021Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). Mechanical stimulation in cell attached patches was performed using a high-speed pressure clamp (Besch et al. ...
-
bioRxiv - Molecular Biology 2022Quote: ... NADH oxidation rate was determined by kinetic absorbance at 340 nm which was collected every 2 min for 30 min using SpectraMax M5 plate reader (Molecular Devices). To determine LDH activity ...
-
bioRxiv - Bioengineering 2022Quote: ... Membrane currents were low pass filtered at 2 kHz and digitized with a sampling rate of 10 kHz (Digidata 1440 A, Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... low-pass filtered at 2 KHz and digitized at 10-20 KHz using a Digidata 1322A interface driven by pClamp 10 software (Molecular Devices). Patch pipettes (4-6 MΩ ...
-
bioRxiv - Biochemistry 2023Quote: ... The detection system consisted of 2 µM Safraine O and fluorescence was monitored using a microplate reader (SpectraMax Paradigm, Molecular Devices) at Λexcitation= 495 nm ...
-
bioRxiv - Biophysics 2023Quote: ... and 95 % relative humidity for 2 h in 200 µL dye buffer according to the manufacturer’s protocol (Molecular Devices, ref: R8190). Just before the assay ...
-
bioRxiv - Neuroscience 2023Quote: ... Voltage and current signals were low pass-filtered (10 kHz) and sequences of 2 s were acquired at 20 kHz with pClamp (Axon Instruments, Molecular Devices). Intrinsic excitability was tested with injection of current pulses (150-250 nA ...
-
bioRxiv - Neuroscience 2023Quote: ... with the analog signals filtered at 2-10 kHz and sampled at 20-50 kHz using a Digidata 1440 digitizer (Molecular Devices). Data was collected using pClamp 10 software (Molecular Devices) ...
-
bioRxiv - Pathology 2023Quote: ... Membrane voltage and current were low-pass filtered at 2–5 kHz and acquired at 10–20 kHz (Digidata 1550; Molecular Devices). All electrophysiological experiments were performed at room temperature (22–25 °C) ...
-
bioRxiv - Biochemistry 2023Quote: ... The reaction was initiated by the addition of 300 μM GTP and the fluorescence was recorded after every 2 min over 60 min at 30 °C using a plate reader FlexStation3 (Molecular devices). For measuring the activity of RdRp in the condensates the same reaction was setup in 96 Well glass bottom plates (Cellvis ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 11 (Molecular Devices). Electrophysiological recordings were extracted and analyzed using Clampfit (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... Presynaptic APs were evoked with 8 consecutive 2 ms pulses of 2500 pA at 5 Hz and postsynaptic potentials were recorded using a Multiclamp 700B amplifier (Molecular Devices). Postsynaptic currents were low-pass filtered at 4 kHz and digitized at 50 kHz ...
-
bioRxiv - Biochemistry 2023Quote: ... under 40x water-immersion lens and recorded in the whole-cell configuration using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices). Patch pipettes were pulled from OD/ID 1.5/0.86 mm capillary glass in a horizontal pipette puller (Model P-1000 ...
-
bioRxiv - Cell Biology 2022Quote: ... Images were acquired at the 2-week endpoint (day 14 of CSE treatment) at 4X magnification using the ImageXpress confocal microscope (Molecular Devices) to observe changes to spheroid size due to compound treatment ...
-
bioRxiv - Physiology 2023Quote: ... The current was induced with a 500 ms depolarization step at 0 mV from the holding potential of −60 mV using barium as the charge carrier and was sampled at 10 kHz and filtered at 2 kHz in the whole-cell voltage patch-clamp configuration with an Axopatch 200B amplifier (Molecular Devices). Peak and residual currents were obtained with Clampfit software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... Data was acquired using Clampex 10.7 software with an Axoclamp 700B amplifier and digitized at 20 kHz with a Digidata 1440A interface and filtered at 2 kHz (Molecular Devices). Recordings where access was greater than 30MW or that changed by >20% were discarded ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... were made using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices).