Labshake search
Citations for Molecular Devices :
201 - 250 of 355 citations for 6 Bromo 2 piperidin 4 yl 1H benzoimidazole since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2023Quote: ... and videos were recorded at 2 frames/sec with 100ms exposure time using MetaMorph acquisition software (Molecular Devices). The excitation light was passed through a cyan excitation filter (Chroma) ...
-
bioRxiv - Biophysics 2023Quote: ... HEK293 cells were recorded at room temperature (25 ± 2 °C) using an Axopatch 200B amplifier (Molecular Devices, USA) with a holding potential of -60 mV ...
-
bioRxiv - Neuroscience 2023Quote: Image analysis methods to quantify relative ubiquilin 2 and TDP-43 aggregate deposition were developed in MetaMorph v7.10.5.476 (Molecular Devices), similar to those previously described [8 ...
-
bioRxiv - Neuroscience 2024Quote: ... Data acquisition (filtered at 2–3 kHz and digitized at 10kHz; Digidata 1440, Molecular Devices, CA, United States) was performed using the Multiclamp 700B amplifier and the Clampex 10.6 software (Molecular Devices).
-
bioRxiv - Cell Biology 2024Quote: ... Changes in fluorescence due to rise in intracellular Ca 2+ were monitored using FlexStation®III (Molecular Devices). Cells were simultaneously excited at 340 nm and 380 nm and emission was recorded at 5s intervals at 510 nm to determine Ca 2+-bound and Ca2+-free Fura-2 respectively ...
-
bioRxiv - Physiology 2022Quote: ... Images were acquired at excitation of 488 nm at the same settings and the fluorescence quantified over 3-4 fields using Metamorph Software (Molecular Devices, Downington PA). For quantitation of the vascular NLRP3 and ICAM-1 ...
-
bioRxiv - Biophysics 2022Quote: ... 4-pole Bessel), sampled at 5 kHz (Digidata, 1440A) and written into digital files with pClamp 10 acquisition software (Molecular Devices, Sunnyvale, CA). Clamped cells were extracellularly perfused with solutions using BPS-8SP solenoid-valve perfusion system (ALA Scientific Instruments ...
-
bioRxiv - Molecular Biology 2019Quote: Intracellular calcium concentration of AsPC-1 cells was measured using the FLIPR-4 calcium assay reagent (Cat # R8142, Molecular Devices, San Jose, CA). In brief ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... The Cytochrome C apoptosis biosensor expressed in a subset of the hepatocytes was imaged in the red channel and analyzed using the multi-wavelength cell scoring application module provided in MetaXpress 4 software (Molecular Devices, Sunnyvale, CA).
-
bioRxiv - Neuroscience 2020Quote: ... Signals were filtered at 4–10 kHz and digitized at 10–20 kHz (Digidata 1322A and pClamp 10.2 Software; Molecular Devices, Sunnyvale, CA, USA). For analyses of K+-channel currents in NGFCs ...
-
bioRxiv - Neuroscience 2021Quote: ... amplifier and filtered online at 10 kHz with the built-in 4-pole Bessel filter and digitized at 20 kHz (Digidata1550B, Molecular Devices, CA, USA).)
-
bioRxiv - Cell Biology 2020Quote: ... incubated at 37°C for 4 h protected from light and read by a plate reader (Spectramax i3, Molecular Devices, Sunnyvale, CA, USA) at 585 nm using an excitation wavelength of 555 nm.
-
bioRxiv - Neuroscience 2021Quote: ... All recordings were filtered online at 10 kHz with the built-in 4-pole Bessel Filter and digitized at 20 kHz (Digidata1440, Molecular Devices, CA, USA). Traces were recorded in pCLAMP 9 (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were made with pClamp 10.3 software using a MultiClamp 700B amplifier set with 4 kHz low-pass Bessel filter and 10 kHz digitization (Molecular Devices, Sunnydale, CA). The light beam of the same laser was directed at the preparation using an 200μm optic fiber submerged into the bath with light beam aimed at the STN ...
-
bioRxiv - Physiology 2022Quote: ... the supernatant was centrifuged at 900 g for 5 min under 4°C and then measured by a luminometer (SpectraMax Plus384, Molecular Devices, CA, USA).
-
bioRxiv - Physiology 2023Quote: ... Relative changes in mag-fluo-4 fluorescence from baseline (F/F0) were recorded using Clampex 9.0 software (Molecular Devices, San Jose, CA, USA). The maximum rate of electrically evoked Ca2+ release was approximated from the peak of the first derivative of the mag-fluo-4 fluorescence (dF/dt ...
-
bioRxiv - Bioengineering 2019Quote: ... Currents were filtered at 2-3 kHz and sampled at 10 kHz using a Digidata 1440 A (Molecular Devices). Patch pipettes (4-6 MΩ ...
-
bioRxiv - Neuroscience 2020Quote: ... a 2 KHz Bessel filter was applied to the data during collection using the MultiClamp 700B (Molecular Devices, CA). For mPSC recordings ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... Data was quantified by measuring fluorescence intensity at 495 nm excitation and 517 nm emission (Flexstation 2, Molecular devices). Ter-butyl hydroperoxide was used as a positive control ...
-
bioRxiv - Physiology 2019Quote: ... and the plate was read within 2 minutes of buffer addition using a SpectraMax M5 plate reader (Molecular Devices) set to top-read chemiluminescent detection with a 500 ms integration time ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were made using an Axoclamp 2 B amplifier with HS-2A x0.1 head stage (Molecular Devices, CA, USA) on a BX51WI Olympus microscope with a 40X LUMPlanFL/IR water immersion objective (Olympus Corporation ...
-
bioRxiv - Physiology 2023Quote: ... and the data were sampled at 2 kHz and filtered at 1 kHz using pClamp 10 software (Molecular Devices). Light stimulation was applied using LEDs and a multi-LED driver through the microscope optics (DC4100 ...
-
bioRxiv - Neuroscience 2023Quote: ... filtered at 2 kHz and digitized at 10 kHz using a MultiClamp 700B amplifier and Digidata 1550 (Molecular Devices). Clampex version 11.4 (Molecular Devices ...
-
CDK5 activity in retinal pigment epithelium contributes to gap junction dynamics during phagocytosisbioRxiv - Cell Biology 2023Quote: ... All recordings were made in current-clamp mode with a 2-channel patch-clamp amplifier (MultiClamp 700B, Molecular Devices). To analyze the input resistance ...
-
bioRxiv - Neuroscience 2023Quote: ... The data were filtered at 2 kHz and sampled at 10 kHz via a digitizer (Digidata 1440, Molecular Devices) and recorded using Clampex 10.6 software (Molecular Devices) ...
-
bioRxiv - Biophysics 2019Quote: ... 100,000 cells loaded with Fluo-4 were placed per well in a 96-well plate and imaged a microplate plate reader (SpectraMax iD33; Molecular Devices, San Jose, California). 25μL of LUVs were added to 175μL of cells at time = 0 such that the final concentration of lipid was 12.5μg/ml ...
-
bioRxiv - Neuroscience 2020Quote: ... All recordings swere filtered (4 kHz low-pass filter) and sampled (10 kHz) for online and later offline analysis with Multiclamp 700B amplifier (Molecular Devices, Sunnyvale, CA, USA) and Clampfit v.10.5 software (Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... band filtered at 0.1-400Hz) were collected (all in current-clamp mode) by using two multiClamp 700B amplifiers (total 4 channels, Molecular devices Inc., Union City, CA) and Clampex 10 software (Molecular Devices Inc. ...
-
bioRxiv - Bioengineering 2022Quote: ... Electrophysiological data were acquired using a MultiClamp 700B amplifier filtered at 4 kHz and digitized at 10 kHz using a Digidata 1440A digitizer in combination with pCLAMP 10 software (Molecular Devices, San Jose, CA). Voltage clamp recordings were limited to neurons that had a stable access resistance of <20 MΩ ...
-
bioRxiv - Biophysics 2023Quote: ... and the decrease in 485-nm excited fluorescence of Fluo-4 was monitored at 520 nm for 15 min using a FLIPR Tetra (Molecular Devices, San Jose, CA).
-
bioRxiv - Neuroscience 2023Quote: ... Electrical signals were acquired at 20 – 50 kHz and filtered at 4 kHz using a Multiclamp 700B amplifier (Molecular Devices, San Jose, CA, USA) connected to a Digidata 1440A digitizer (Molecular Devices ...
-
bioRxiv - Neuroscience 2024Quote: ... Electrical signals were acquired at 20 – 50 kHz and filtered at 4 kHz using a Multiclamp 700B amplifier (Molecular Devices, San Jose, CA, USA) connected to a Digidata 1440A digitizer (Molecular Devices ...
-
bioRxiv - Neuroscience 2021Quote: ... and maintained at room temperature for > 1.5 h before recording (34⁰ C; 2-3 ml/min perfusion; Olympus BX-51WI microscope; Molecular Devices Multiclamp 700B amplifier ...
-
bioRxiv - Neuroscience 2019Quote: ... filtered at 2 kHz and digitized at 20 kHz with a DigiData 1440 data acquisition board (Molecular Devices, Sunnyvale, CA). Analysis of electrophysiological parameters was done using Clampfit (Molecular Devices ...
-
bioRxiv - Neuroscience 2019Quote: ... Data were low-pass filtered at 2 kHz and acquired via an Axopatch 700B amplifier (Molecular Devices, Foster City, CA) and later analyzed using pClamp 10 software (Molecular Devises ...
-
bioRxiv - Neuroscience 2020Quote: ... Signals were low-pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 10.5 (Molecular Devices). Optical stimulation was applied through the microscope with two LEDs (460 nm and 525 nm ...
-
bioRxiv - Neuroscience 2020Quote: ... The data were low-pass filtered at 2 kHz and digitized at 10 kHz using a Digidata 1322A (Molecular Devices) and stored using Clampex version10 ...
-
bioRxiv - Cell Biology 2021Quote: ... Fluorescence was measured after 2 hours of incubation at 37°C using the SpectraMax® iD3 microplate reader (Molecular Devices). To compare growth rates ...
-
bioRxiv - Neuroscience 2020Quote: ... Signals were low-pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 10.5 (Molecular Devices). Electrophysiological recordings were extracted using Clampfit (Molecular Devices ...
-
bioRxiv - Cell Biology 2021Quote: ... Data were digitized at 10 kHz with a 2 kHz low-pass filter using a Multiclamp 700A amplifier (Molecular Devices). For all electrophysiological experiments ...
-
bioRxiv - Cell Biology 2022Quote: Multi-well calcium flux assays were performed with the Fura-2 QBT Calcium Kit (R8197, Molecular Devices, Inc., Sunnyvale, CA). 10,000 – 20,000 cells/well were plated into a 96-well plate to achieve confluence when analyzed ...
-
bioRxiv - Neuroscience 2021Quote: ... filtered at 2 kHz and sampling rate at 20 kHz with an Axon Digidata 1550B plus HumSilencer digitizer (Molecular Devices). Slices were maintained under continuous perfusion of aCSF at 32-33°C with a 2-3 mL/min flow ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 10.5 (Molecular Devices). All the electrophysiological recordings were extracted using Clampfit (Molecular Devices ...
-
bioRxiv - Developmental Biology 2021Quote: ... 340/386 nm image pairs were acquired every 2 s with the MetaFluor software (Molecular Devices Corp, Downington, PA, USA). [Ca2+]i was calculated from the background-corrected Fura-2 LR 340/380 nm fluorescence excitation ratio from manually defined cell-sized regions of interest ...
-
bioRxiv - Neuroscience 2020Quote: Signals were low-pass filtered at 2 kHz and digitised at 10 kHz using an Axopatch 200B amplifier (Molecular Devices) and WinLTP v1.11 acquisition software [46].
-
bioRxiv - Neuroscience 2020Quote: Data were digitized at 10 kHz with a 2 kHz low-pass filter using a Multiclamp 700A amplifier (Molecular Devices). Data were analyzed using Clampfit 9.02 software ...
-
bioRxiv - Biochemistry 2021Quote: ... All currents were sampled at 10 kHz and low-pass filtered at 2 kHz through pCLAMP software (Molecular Devices, Sunnyvale). Origin 9.0 software (OriginLab Corp. ...
-
bioRxiv - Neuroscience 2022Quote: ... Signals were low-pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 10.5 (Molecular Devices). All the electrophysiological recordings were extracted using Clampfit (Molecular Devices ...
-
bioRxiv - Molecular Biology 2022Quote: ... filtered at 2 kHz and digitized at 5 kHz using Digidata 1440A interface with pClamp 10 software (Molecular Devices Corporation). Series resistance was typically 5–20 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... Neurons were recorded from layers 2/3 (100 to 400 μm below the pia) using a Multiclamp 700B (Molecular Devices). Series resistance for recordings typically ranged from 20 to 80 MΩ ...