Labshake search
Citations for Molecular Devices :
351 - 400 of 465 citations for R 4 Benzyl 2 2 diphenylphosphino benzyl 4 5 dihydrooxazole since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz using a Digidata 1500A data acquisition interface (Molecular Devices, San Jose, CA) and acquired using pClamp 10.6 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell measurements were low-pass filtered at 5 kHz using an Axopatch 200B amplifier (Molecular Devices, Inc). Recordings were digitized with the ITC-18 board (Instrutech ...
-
bioRxiv - Neuroscience 2023Quote: ... All electrophysiological data were digitized at 5-10 KHz with a Digidata 1440A data acquisition board (Molecular Devices).
-
bioRxiv - Neuroscience 2023Quote: ... The data were digitized at 5-20 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The whole-cell current recordings were conducted using pCLAMP software (version 10 ...
-
bioRxiv - Biochemistry 2024Quote: ... bioluminescence data were collected for ∼5 min on a SpectraMax iD3 plate reader (Molecular Devices, Sunnyvale, CA, USA). Subsequently ...
-
bioRxiv - Bioengineering 2023Quote: ... and performing an absorbance spectral scan (200–1000 nm; 5 nm increments) using a Spectramax M3 (Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... low-pass filtered at 5 kHz and digitally sampled at 20 kHz and analyzed with pClamp10 (Molecular Devices). Depolarizing current steps (800 msec duration ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were incubated at RT for 5 min before fluorescence was measured using a SpectraMax M5 (Molecular Devices) microplate reader with excitation/emission maxima at 490/520 nm ...
-
bioRxiv - Neuroscience 2024Quote: ... low-pass filtered (5 KHz) and digitised (Axopatch-200B, custom amplifier/filters, Digidata 1440, Clampex software; Molecular Devices). Pipettes and electrodes were positioned with Sutter MP265 and 285 manipulators with a diagonal (axial ...
-
bioRxiv - Neuroscience 2024Quote: ... Signals were filtered at 5 kHz using a Digidata 1500B data acquisition interface (Molecular Devices, San Jose, CA) and acquired using pClamp 10.6 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2020Quote: ... Images were acquired at 37°C in a temperature-controlled chamber under 5% CO2 using Metamorph software (Molecular Devices), for periods of 10 min with a confocal Z-series stack of 10μm (921×1024 pixels ...
-
bioRxiv - Biophysics 2022Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Biophysics 2021Quote: ... Data was filtered at 5 kHz and recorded at a 200 kHz sampling rate with program Clampex (Molecular Devices). Experiments were carried out in symmetrical 200 mM KCl ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... a baseline read of luminescent signal was serially recorded over 5 min using a Flexstation 3 instrument (Molecular Devices) at 37°C before addition of the indicated concentration of ligand ...
-
bioRxiv - Biophysics 2023Quote: ... Signals were filtered at 5 kHz and sampled at 20 kHz prior to acquisition with Clampex 10.6 (Molecular Devices). A voltage step protocol using a holding potential of 0 mV for 0.2 s was performed prior to 20 mV incremental voltage steps ...
-
bioRxiv - Neuroscience 2022Quote: ... These signals were recorded in frequencies of 0 - 5 kHz and digitized at 50 kHz (Digidata 1322A, Molecular Devices). For assessing evoked synaptic field potentials ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were stained with the FLIPR calcium indicator Calcium 5 Assay Kit (Molecular Devices Corp., Sunnyvale, CA, USA) to image the Ca2+-transients evoked by capsaicin addition ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were filtered at 1 kHz and sampled at 5 kHz with Digidata 1322A interface and Clampex 9.2 and 10.6 from pClamp software (Molecular Devices). Pipettes (from borosilicate capillaries ...
-
bioRxiv - Neuroscience 2024Quote: ... Current signals were low-pass filtered at 5 kHz and sampled at 20 kHz using pCIamp10.3 or 10.7 (Molecular Devices). Series resistance was compensated between 85 – 90% in experiments for Figures 1-5 ...
-
bioRxiv - Biophysics 2024Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... a measurement (Ex412/Em480) taken every 5 sec for 600 sec on a SpectraMax M5 multimode reader (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... 3 - 5 ms (DAPI), 150 - 250 ms (GFP) and 2,000 - 3,000 ms (Cy3, Cy5, mCherry) using MetaMorph software (Molecular Devices) at 0.133 µm/pixel (Figure 1) ...
-
bioRxiv - Biophysics 2021Quote: ... Various locations were imaged every ∼3 minutes (every ∼5 mins for the ampicillin experiments) using automated routines (Metamorph, Molecular Devices). All single-cell growth experiments were performed in triplicates yielding a total of n = 1520 observations of dividing cells ...
-
bioRxiv - Neuroscience 2021Quote: ... digitized at 10–20 kHz and low-pass filtered at 2–5 kHz with a Digidata 1440A analog-to-digital converter and analyzed off-line using Clampfit 10.7 software (Molecular Devices). Intrinsic excitability was determined in response to increasing depolarizing current pulses (+75 pA ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence intensity measurements were collected every 30 sec on a SpectraMax M5 fluorometer using Softmax Pro 5 software (Molecular Devices; excitation and emission set to 410 nm and 490 nm ...
-
bioRxiv - Neuroscience 2020Quote: ... The steady-state voltage responses were plotted against the amplitude of current injection and the slope of the linear fit between −5 pA to −30 pA was used to define Rin (Clampfit v. 11.1; Molecular Devices). Time constant (tau ...
-
bioRxiv - Microbiology 2021Quote: ... incubating 1 hour at 37ºC 5% CO2 and measuring fluorescence (λEX = 540 nm, λEM = 590 nm) on a SpectraMax M5 (Molecular Devices). The IC50 was calculated using GraphPhad Prism 9 using a non-linear regression analysis ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... was added and plates were gently shaken for 5 s to mix and then absorbance (O.D.) was measured at 450/620 nm on a SpectraMax M5 (Molecular Devices) instrument and data were processed by SoftMax Pro 6.4 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2021Quote: ... the data acquired at 5 kHz with a Digidata 1440A (Axon instruments) interface using pCLAMP 10 acquisition software (Molecular Devices). The Internal and external (bath ...
-
bioRxiv - Neuroscience 2021Quote: ... with a high-pass Bessel (8-pole) filter with a −3 dB cutoff of 5 Hz using Clampfit 10.6 (Molecular Devices). All data was analyzed using NeuroMatic in Igor Pro software (WaveMetrics ...
-
bioRxiv - Physiology 2021Quote: ... Currents were filtered at 1 kHz and digitized at 5 kHz using an Axopatch 200B amplifier and Clampex 10.4 (Molecular Devices. Offline analysis was performed using Clampfit 10.4 ...
-
bioRxiv - Neuroscience 2021Quote: ... Data were filtered at 5-10 kHz and digitized at 50 kHz using an acquisition board (Digidata 1440, Molecular Devices) attached to a personal computer running pCLAMP 10.2 software package (Molecular Devices) ...
-
bioRxiv - Immunology 2021Quote: ... DAF fluorescence intensities were measured every 5 minutes for a total of 60 minutes using a SpectraMax iD3 (Molecular Devices). All experiments were repeated at least four times per batch.
-
bioRxiv - Systems Biology 2022Quote: ... and the EtBr accumulation was measured by measuring the fluorescence in a microplate reader (spectramax multimode M 5, Molecular devices) at 37°C using 530 nm excitation wavelength and 585 nm as the emission wavelength ...
-
bioRxiv - Cancer Biology 2023Quote: ... Whole-cell currents were filtered at 5 kHz and digitized at 10 kHz using the software pCLAMP 10 (Molecular Devices). Micropipettes were pulled from Corning 8161 capillary glass tubes (Warner Instruments ...
-
bioRxiv - Biochemistry 2023Quote: ... Data were sampled at 10 kHz and filtered at 5 kHz using a Digidata 1550A device controlled by pCLAMP 10.5 (Molecular Devices). Capacitance transients and leak currents were removed by subtracting a scaled control trace utilizing a P/4 protocol.
-
bioRxiv - Neuroscience 2022Quote: ... digitized at 5-20 kHz and acquired using a Digidata 1440A digitizer and pClamp 10 software (all from Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... Electrophysiological recordings were obtained from one neuron per slice and 4-5 slices per mouse using a Multiclamp 700B amplifier and analyzed using a digital system (pClamp version 11.2, Molecular Devices). Series and input resistances were monitored throughout the experiment using a -5 mV pulse ...
-
bioRxiv - Neuroscience 2024Quote: ... were plotted against the amplitude of current injection and the slope of the linear fit between −5 pA to −30 pA was used to define Rin (Clampfit v. 11.2; Molecular Devices). Time constant (tau ...
-
bioRxiv - Neuroscience 2024Quote: Currents were filtered at 5 kHz using low-pass Bessel filter of the amplifier and digitized using a Digitata 1,440 unit (Molecular Devices). All voltage clamp measurements were performed at a holding voltage of -60 mV ...
-
bioRxiv - Neuroscience 2023Quote: Spontaneous IPSCs were detected and analyzed for 5-minute epochs during baseline and following drug exposure (Clampfit 11.1, Molecular Devices). For electrically-evoked IPSCs ...
-
bioRxiv - Neuroscience 2024Quote: ... Continuous current traces of 5-min duration (recorded at least 5 min after achieving whole-cell configuration) were acquired and analyzed with Clampfit 10.7 (Molecular Devices). The frequency and amplitude of recorded sIPSCs were quantified.
-
bioRxiv - Neuroscience 2024Quote: ... We detected the evoked qEPSCs 0.5-1.5s after the light onset and calculated the average number of qEPSCs from 5 sweeps using Clampfit 11 (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: Membrane currents from voltage-clamp electrophysiology experiments were amplified and low-pass filtered at 5 kHz using a MultiClamp 700B amplifier (Molecular Devices), digitized at 10 kHz and acquired using a Digidata 1550A digitizer (Molecular Devices) ...
-
bioRxiv - Cell Biology 2020Quote: ... were acquired at 20–100 kHz and filtered at 5–10 kHz (low-pass Bessel filter) using a computer attached to a DigiData 1200 (Molecular Devices). Patch pipettes were pulled from borosilicate glass (Kimble® Queretaro ...
-
bioRxiv - Cancer Biology 2022Quote: ... Blood samples were centrifuged to obtain plasma (300g for 5 min at room temperature) and OG fluorescence was read with a plate reader (FlexStation II Molecular Devices) at 480nm excitation/520nm emission.
-
bioRxiv - Neuroscience 2021Quote: ... 5-minute traces were recorded and mEPSCs events were detected using a template matching built-in feature in Clampfit (Molecular devices).
-
bioRxiv - Biophysics 2022Quote: ... The data was passed through a low-pass filter (1 kHz cutoff frequency) and stored in PC using an analog-to-digital converter (5 kHz sampling; Digidata 1550A; Molecular Devices) and pCLAMP software (Molecular Devices).
-
bioRxiv - Immunology 2021Quote: ... cells were lysed using a previously described assay buffer (109) and shaken for 5 min prior to quantitation of luciferase expression using a Spectramax L luminometer (Molecular Devices). Percent neutralization was determined by subtracting background luminescence measured from cells control wells (cells only ...
-
bioRxiv - Plant Biology 2020Quote: ... using 10mM EDTA for 15 min while shaking followed by the addition of CaCl2 to a final concentration of 5 or 50mM after which the optical density at 600nm (Versamax, Molecular Devices) was measured over time.