Labshake search
Citations for Molecular Devices :
351 - 400 of 462 citations for 5 Bromo 2 Tert Butyldimethylsilyl 4 Methylthiazole since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... sIPSCs were recorded at −70 mV in the presence of the glutamate receptor antagonists (20 μM 6-cyano-7-nitroquinoxaline-2,3-dione +50 μM D-(2R)-amino-5-phosphonopentanoic acid) using a Multiclamp 700B amplifier and pClamp 10.0 software (Molecular devices; California, United States). A 1 min period after 5 min application of the glutamate receptor antagonists was used for statistical analysis (Igor software ...
-
bioRxiv - Immunology 2020Quote: ... Samples were incubated for 1 hour at 37°C with 5% CO2 and OD440nm & OD650nm were then measured using a 96-well plate spectrophotometer (Molecular Devices or BioTek). OD650nm was subtracted from OD440nm then percent viability was calculated relative to the no treatment condition.
-
bioRxiv - Biophysics 2024Quote: ... Data were digitized at 5 kHz using a 16-bit A/D converter data acquisition system (Axon Digidata 1550B, Axon Instruments, Molecular Devices, CA, US), and recorded using Clampex 11 acquisition software (Axon Instruments ...
-
bioRxiv - Cell Biology 2020Quote: ... incubated for 2 hours with 100 nM Coelenterazine Cp and washed before initiating measurements using a spectrophotometer (SpectraMax M, Molecular Devices) equipped with injectors allowing the detection of luminescence in a kinetic mode.
-
bioRxiv - Cell Biology 2020Quote: Mitochondrial morphology was assessed in a strain carrying bcIs78 (Pmyo-3::gfpmt) using a Zeiss Axioskop 2 with a 63x objective and MetaMorph software (Molecular Devices).
-
bioRxiv - Neuroscience 2021Quote: ... in time-lapse mode either at 1 fps (for imaging in response to 200-APs stimulation) or 2 fps (for imaging in response to 50-APs stimulation) under the control of MetaMorph software (Molecular Devices). SEP fluorescence was imaged with 470/22 nm excitation and 514/30 nm emission filters ...
-
bioRxiv - Genomics 2020Quote: ... Luciferase activity was measured 48-hours post-transfection with a 2-second integration time on a LMax II 384 Luminometer (Molecular Devices). Background subtracted luminescence values for each SNV were z-scored ...
-
bioRxiv - Neuroscience 2020Quote: ... and were digitized off-line at 10 kHz (low-pass filtered at 2 kHz with an 8-pole Bessel filter) using pCLAMP9 software (Molecular Devices).
-
bioRxiv - Neuroscience 2021Quote: ... Light-evoked action potentials from ChR2-mCherry+ neurons in the SC were triggered by a light-pulse train (473 nm, 2 ms, 10 Hz or 20 Hz, 20 mW) synchronized with Clampex 10 data acquisition software (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... A small craniotomy was performed over left auditory cortex and whole-cell voltage-clamp recordings were obtained from layer 2/3 (200-400 µm from the pial surface) with a Multiclamp 700B amplifier (Molecular Devices). Borosilicate glass pipettes (Sutter ...
-
bioRxiv - Neuroscience 2020Quote: ... Somatic whole-cell voltage-clamp or current-clamp recordings were made from layer 2-3 pyramidal cells with an Multiclamp 200B amplifier (Molecular Devices) using IR video microscopy (Olympus) ...
-
bioRxiv - Neuroscience 2022Quote: ... and analog signals were low-pass filtered at 2 kHz and digitized at 10 kHz with a Digidata 1550 interface (Molecular Devices). Clampex (v 11.4 ...
-
bioRxiv - Neuroscience 2021Quote: ... The density and distribution of immunogold particles were quantitatively analyzed on electron micrographs using MetaMorph software (Molecular Devices; n = 2 mice). The density of SIPA1L1 on excitatory nerve terminals and dendritic spines was calculated by measuring the number of immunogold particles ...
-
bioRxiv - Neuroscience 2020Quote: ... Light-evoked action potentials from ChR2-mCherry+ neurons in the SC were triggered by a light-pulse train (473 nm, 2 ms, 10 Hz, 20 mW) synchronized with Clampex 10 data acquisition software (Molecular Devices). Light-evoked postsynaptic currents from SNc neurons were triggered by single light pulses (2 ms ...
-
bioRxiv - Neuroscience 2020Quote: ... a 10 KHz Bessel filter was applied to the data during collection and the data was post hoc filtered at 2 KHz after the recordings using Clampfit 10.3 (Molecular Devices, CA). For evoked currents ...
-
bioRxiv - Neuroscience 2021Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). All measurements were performed with extracellular (EC ...
-
bioRxiv - Cancer Biology 2020Quote: ... Fluorescence intensity values were collected every 2 min during 1h at 500 nm in a SpectraMax M2 microplate reader (Molecular Devices). Activity units were calculated as ...
-
bioRxiv - Neuroscience 2022Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 11 (Molecular Devices). Electrophysiological recordings were extracted using Clampfit (Molecular Devices) ...
-
bioRxiv - Neuroscience 2022Quote: Mechanically activated currents from HEK P1KO cells 2 days after transfection were recorded in whole-cell patch clamp mode using a MultiClamp700A amplifier and DigiData1550 (Molecular Devices) and stored directly and digitized online using pClamp software (version 10.7) ...
-
bioRxiv - Biophysics 2022Quote: ... Absorbance at 405 nm was measured before and after a 1 h or 2 h incubation at room temperature using a microplate reader (SpectraMax 340 PC384; Molecular Devices). Ligand-induced AP-TGF-α release was calculated as described previously.26 Unless otherwise noted ...
-
bioRxiv - Bioengineering 2022Quote: ... The passage of dextran into the basolateral side of the trophoblast layer was monitored every 2 minutes for 12 minutes with a high content microscope (ImageXPress XLS-C; Molecular Devices) in the TRITC and FITC channels ...
-
bioRxiv - Neuroscience 2020Quote: ... digitized at 20 kHz and low-pass Bessel-filtered at 2 kHz with a personal computer running Clampex 11 and a DigiData 1440 (Molecular Devices). Two concurrent channels were captured ...
-
bioRxiv - Physiology 2020Quote: ... and Vm was recorded using sharp microelectrodes backfilled with 2 M KCl (∼150-MΩ tip resistance) connected to an amplifier (AxoClamp 2B, Molecular Devices), data acquisition system (Digidata 1322A ...
-
bioRxiv - Biophysics 2021Quote: ... 10 kHz or by-pass setting and digitized with a Digidata 1550B at a 100 kHz (10 μs bandwidth) or 500 kHz (2 μs bandwidth) sampling rate and recorded using the software pClamp 10 (Molecular Devices). The current trace was analysed using a custom written MATLAB script provided by Prof Joshua B ...
-
bioRxiv - Immunology 2020Quote: ... was added to the bottom wells and the absorbance at 490 nm (A490) was determined after incubation for 2 h at 37° C using a FlexStation 3 plate reader (Molecular Devices). The total number of cells that migrated to the bottom wells was calculated by interpolation of the observed A490 values using a standard curve generated with a known number of cells.
-
bioRxiv - Microbiology 2021Quote: Competitive binding of mAbs to recombinant SARS-CoV-2 RBD with hACE2 was evaluated using the ForteBio Octet HTX instrument (Molecular Devices) as described previously (34) ...
-
bioRxiv - Biophysics 2020Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). All measurements were performed with extracellular (EC ...
-
bioRxiv - Neuroscience 2021Quote: ... Currents were filtered at 2 kHz using low-pass Bessel filter of the amplifier and digitized using a Digidata 1440 unit (Molecular Devices). Mechanical stimulation in cell attached patches was performed using a high-speed pressure clamp (Besch et al. ...
-
bioRxiv - Molecular Biology 2022Quote: ... NADH oxidation rate was determined by kinetic absorbance at 340 nm which was collected every 2 min for 30 min using SpectraMax M5 plate reader (Molecular Devices). To determine LDH activity ...
-
bioRxiv - Bioengineering 2022Quote: ... Membrane currents were low pass filtered at 2 kHz and digitized with a sampling rate of 10 kHz (Digidata 1440 A, Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... Intracellular recordings from MNs were made with 10-20 MΩ sharp electrodes filled with 3 M potassium acetate connected to an Axoclamp 2-B amplifier (Molecular Devices). Data acquisition and analyses of resting potential ...
-
bioRxiv - Neuroscience 2022Quote: ... low-pass filtered at 2 KHz and digitized at 10-20 KHz using a Digidata 1322A interface driven by pClamp 10 software (Molecular Devices). Patch pipettes (4-6 MΩ ...
-
bioRxiv - Neuroscience 2024Quote: ... low-pass filtered at 2 kHz and digitized at 20 kHz using the Digidata 1440A interface and pClamp 10 software (Molecular Devices). Putative 5-HT neurons were identified on the basis of their characteristic response to a series of hyper-and depolarizing current pulses (duration ...
-
bioRxiv - Neuroscience 2024Quote: ... evoked synaptic currents recorded in 2 min (12 sweeps) at Vh= -70 mV were averaged and analyzed using Clampfit10 (Molecular Devices). Five electrical stimuli from a Digitimer isolated stimulator (DS2A Mk.II ...
-
bioRxiv - Biophysics 2024Quote: ... Currents were digitized at a sampling rate of 2 kHz and lowpass filtered at 10 Hz with an Axon CNS 1440A Digidata system controlled by pCLAMP 10 (Molecular Devices).
-
bioRxiv - Biophysics 2024Quote: ... Currents were low-pass filtered at 2 kHz and acquired at 10 kHz by the analogue-to-digital interface Digidata 1440 (Molecular Devices). All experiments were performed at room temperature (20°–22°C) ...
-
bioRxiv - Biochemistry 2023Quote: ... The detection system consisted of 2 µM Safraine O and fluorescence was monitored using a microplate reader (SpectraMax Paradigm, Molecular Devices) at Λexcitation= 495 nm ...
-
bioRxiv - Biophysics 2023Quote: ... and 95 % relative humidity for 2 h in 200 µL dye buffer according to the manufacturer’s protocol (Molecular Devices, ref: R8190). Just before the assay ...
-
bioRxiv - Neuroscience 2023Quote: ... Voltage and current signals were low pass-filtered (10 kHz) and sequences of 2 s were acquired at 20 kHz with pClamp (Axon Instruments, Molecular Devices). Intrinsic excitability was tested with injection of current pulses (150-250 nA ...
-
bioRxiv - Neuroscience 2023Quote: ... with the analog signals filtered at 2-10 kHz and sampled at 20-50 kHz using a Digidata 1440 digitizer (Molecular Devices). Data was collected using pClamp 10 software (Molecular Devices) ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 11 (Molecular Devices). Electrophysiological recordings were extracted and analyzed using Clampfit (Molecular Devices ...
-
bioRxiv - Biochemistry 2023Quote: ... under 40x water-immersion lens and recorded in the whole-cell configuration using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices). Patch pipettes were pulled from OD/ID 1.5/0.86 mm capillary glass in a horizontal pipette puller (Model P-1000 ...
-
bioRxiv - Cell Biology 2022Quote: ... Images were acquired at the 2-week endpoint (day 14 of CSE treatment) at 4X magnification using the ImageXpress confocal microscope (Molecular Devices) to observe changes to spheroid size due to compound treatment ...
-
bioRxiv - Physiology 2023Quote: ... The current was induced with a 500 ms depolarization step at 0 mV from the holding potential of −60 mV using barium as the charge carrier and was sampled at 10 kHz and filtered at 2 kHz in the whole-cell voltage patch-clamp configuration with an Axopatch 200B amplifier (Molecular Devices). Peak and residual currents were obtained with Clampfit software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... Data was acquired using Clampex 10.7 software with an Axoclamp 700B amplifier and digitized at 20 kHz with a Digidata 1440A interface and filtered at 2 kHz (Molecular Devices). Recordings where access was greater than 30MW or that changed by >20% were discarded ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Fluorescence was measured every 2 seconds (λexcitation = 470 nm, λemission = 515 nm) using a high-throughput FLIPRTETRA cellular screening system (Molecular Devices). Peptides were added after at least 2 min of background recording ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were recorded at a sampling rate of 20 kHz and filtered at 2 Hz by a 8-pole Bessel filter using a MultiClamp 200 amplifier (Molecular Devices). Cells with resting membrane potential more depolarized than -50 mV and access resistance exceeding 25 MΩ were excluded from further analyses ...
-
bioRxiv - Neuroscience 2024Quote: ... Spontaneous EPSCs and IPSCs were recorded in the whole-cell voltage clamp configuration at a holding potential of -70 mV and sampled at 10 kHz and filtered at 2 kHz using an Axopatch 200B amplifier and Digidata 1322A digitizer (Molecular Devices). The pipette internal solution for sEPSC contained (in mM) ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... were made using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... Currents were digitally filtered offline by using a low-pass Gaussian filter with a −3 dB cut-off set to 2 kHz (Clampfit software; pClamp 11, Molecular Devices).