Labshake search
Citations for Molecular Devices :
151 - 200 of 433 citations for 6 AMINO 2 5 DINITROPYRIDINE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... The data were digitized at 5–500 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The whole-cell current recordings were done using pCLAMP software (version 10 ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz with the patch-clamp amplifier (Axopatch 1-D, Molecular Devices, Sunnyvale, CA) and sampling rate was adjusted according to the kinetics of membrane current ...
-
bioRxiv - Biophysics 2022Quote: ... The data were filtered at 5 kHz and sampled at 20 kHz (Digdata1550, Molecular Devices, Sunnyvale, CA, USA) and stored in a computer (pClamp10.6 ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz using a Digidata 1500A data acquisition interface (Molecular Devices, San Jose, CA) and acquired using pClamp 10.6 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell measurements were low-pass filtered at 5 kHz using an Axopatch 200B amplifier (Molecular Devices, Inc). Recordings were digitized with the ITC-18 board (Instrutech ...
-
bioRxiv - Neuroscience 2022Quote: ... low-pass filtered at 5 kHz and digitally sampled at 20 kHz and analyzed with pClamp10 (Molecular Devices). Depolarizing current steps (800 msec duration ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were acquired and filtered (at 5 kHz 4-pole Bessel filter) with MultiClamp 700B amplifier (Molecular Devices), digitized with Digidata 1440A (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... All electrophysiological data were digitized at 5-10 KHz with a Digidata 1440A data acquisition board (Molecular Devices).
-
bioRxiv - Neuroscience 2023Quote: ... The data were digitized at 5-20 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The whole-cell current recordings were conducted using pCLAMP software (version 10 ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were incubated at RT for 5 min before fluorescence was measured using a SpectraMax M5 (Molecular Devices) microplate reader with excitation/emission maxima at 490/520 nm ...
-
bioRxiv - Neuroscience 2023Quote: ... low-pass filtered (5 KHz) and digitised (Axopatch-200B, custom amplifier/filters, Digidata 1440, Clampex software; Molecular Devices). Pipettes and electrodes were positioned with Sutter MP265 and 285 manipulators with a diagonal (axial ...
-
bioRxiv - Bioengineering 2023Quote: ... and performing an absorbance spectral scan (200–1000 nm; 5 nm increments) using a Spectramax M3 (Molecular Devices).
-
bioRxiv - Biochemistry 2024Quote: ... bioluminescence data were collected for ∼5 min on a SpectraMax iD3 plate reader (Molecular Devices, Sunnyvale, CA, USA). Subsequently ...
-
bioRxiv - Biophysics 2020Quote: ... Data were acquired at 2 kHz and analyzed using the pClamp 10 software (Molecular Devices, USA). Because extracellular divalent cations (such as ...
-
bioRxiv - Neuroscience 2022Quote: ... Membrane potential was recorded using an AxoClamp 900A digital amplifier and HS-2 headstage (Molecular Devices). Signals were digitized and stored using Axon Digidata 1550B and pClamp 9 software (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... Data were acquired at 20 KHz and filtered at 2 KHz with pCLAMP 10 (Molecular Devices). Brain slices were perfused with recording aCSF at 1-2 mL/min with constant oxygenation ...
-
bioRxiv - Neuroscience 2023Quote: ... filtered at 2 kHz and digitized at 10 kHz using a MultiClamp 700B amplifier (Molecular Devices) and stored using pClamp 10 software ...
-
bioRxiv - Genetics 2023Quote: ... and low-pass filtered at 2 kHz using a MultiClamp 700B amplifier and Clampex (Molecular Devices). Leak currents before mechanical stimulation were subtracted offline from the current traces ...
-
bioRxiv - Neuroscience 2023Quote: ... filtered at 2 kHz and digitized at 10 kHz using a MultiClamp 700B amplifier (Molecular Devices) and stored using pClamp 10 software ...
-
bioRxiv - Synthetic Biology 2019Quote: ... and then Quinoneimine dye formed was measured at 505 nm per 5 minutes using SpectraMax M2e(Molecular Devices, American) (Job et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... Images were acquired at 37°C in a temperature-controlled chamber under 5% CO2 using Metamorph software (Molecular Devices), for periods of 10 min with a confocal Z-series stack of 10μm (921×1024 pixels ...
-
bioRxiv - Biophysics 2022Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Biophysics 2021Quote: ... Data was filtered at 5 kHz and recorded at a 200 kHz sampling rate with program Clampex (Molecular Devices). Experiments were carried out in symmetrical 200 mM KCl ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... a baseline read of luminescent signal was serially recorded over 5 min using a Flexstation 3 instrument (Molecular Devices) at 37°C before addition of the indicated concentration of ligand ...
-
bioRxiv - Neuroscience 2022Quote: ... These signals were recorded in frequencies of 0 - 5 kHz and digitized at 50 kHz (Digidata 1322A, Molecular Devices). For assessing evoked synaptic field potentials ...
-
bioRxiv - Biophysics 2023Quote: ... Signals were filtered at 5 kHz and sampled at 20 kHz prior to acquisition with Clampex 10.6 (Molecular Devices). A voltage step protocol using a holding potential of 0 mV for 0.2 s was performed prior to 20 mV incremental voltage steps ...
-
bioRxiv - Neuroscience 2023Quote: ... a measurement (Ex412/Em480) taken every 5 sec for 600 sec on a SpectraMax M5 multimode reader (Molecular Devices).
-
bioRxiv - Biophysics 2024Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were stained with the FLIPR calcium indicator Calcium 5 Assay Kit (Molecular Devices Corp., Sunnyvale, CA, USA) to image the Ca2+-transients evoked by capsaicin addition ...
-
bioRxiv - Neuroscience 2024Quote: ... Current signals were low-pass filtered at 5 kHz and sampled at 20 kHz using pCIamp10.3 or 10.7 (Molecular Devices). Series resistance was compensated between 85 – 90% in experiments for Figures 1-5 ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were filtered at 1 kHz and sampled at 5 kHz with Digidata 1322A interface and Clampex 9.2 and 10.6 from pClamp software (Molecular Devices). Pipettes (from borosilicate capillaries ...
-
bioRxiv - Cell Biology 2021Quote: ... filtered at 2 kHz with an 8-pole Bessel filter and analyzed with Clampfit 10.7 (Molecular Devices) and Origin 8 Pro (Origin Lab ...
-
bioRxiv - Neuroscience 2022Quote: ... Conventional tight-seal (>2 GΩ) whole cell patch-clamp recordings were acquired using Multiclamp 700B (Molecular Devices) amplifier ...
-
bioRxiv - Neuroscience 2021Quote: ... with Bessel filter of 2 kHz and digitized at 50 kHz using Axon DigiData 1500A (Molecular Devices). The Axon pClamp 10 (Molecular Devices ...
-
bioRxiv - Neuroscience 2020Quote: ... spike threshold in Spike 2 v7.10 (Cambridge Electronic Design) and action potential properties in pCLAMP (Molecular Devices). A total of 20 mice were used for intrinsic excitability experiments.
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... data were filtered (2 KHz) and digitized (10 KHz) using a Digidata 1550B1 (Molecular Devices, CA, USA).
-
bioRxiv - Physiology 2021Quote: ... and low pass filtered at 2 kHz using a MultiClamp 700B amplifier and Clampex (Molecular Devices, LLC). Leak currents before mechanical stimulation were subtracted offline from the current traces.
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Data were sampled at 2 kHz using the pClamp 10.4 acquisition software (Axon Instruments, Molecular Devices, USA). The microelectrodes were pulled from glass capillaries (TW 120.3 ...
-
bioRxiv - Cell Biology 2022Quote: ... The signals were acquired at 10 kHz and filtered at 2 kHz using pClamp10 software (Molecular Devices). For nAChR recordings ...
-
bioRxiv - Neuroscience 2022Quote: ... Recordings were filtered at 2 kHz and digitized at 10 kHz using MultiClamp 700B software (Molecular Devices). Claustrum projection neuron type was determined via a 5 ms depolarization step while recording in current-clamp mode to determine burst firing properties (Type I ...
-
bioRxiv - Immunology 2023Quote: ... and 2% phosphoric acid and measuring absorbance at 546nm with a SpectraMax M2 microplate reader (Molecular Devices).
-
bioRxiv - Neuroscience 2023Quote: ... at 100 kHz sampling rate and filtered at 2 kHz using a MultiClamp 700B amplifier (Molecular Devices). At the end of the recording ...
-
bioRxiv - Neuroscience 2023Quote: ... at 100 kHz sampling rate and filtered at 2 kHz using a MultiClamp 700B amplifier (Molecular Devices). 30 consecutive action potentials were recoded every 5 seconds using Clampex 10.6 (Molecular Devices ...
-
bioRxiv - Neuroscience 2024Quote: ... Data acquisition (filtered at 2–3 kHz and digitized at 10kHz; Digidata 1440, Molecular Devices, CA, USA) was performed using the Multiclamp 700B amplifier and the Clampex 10.9 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2024Quote: ... Traces were low-pass filtered at 2 kHz and digitized at 10 kHz (DigiData 1,550, Molecular Devices). Data were acquired and analyzed using Clampfit 11.0 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2024Quote: ... We acquired wingbeat amplitude data at 2 kHz using a Digidata 1550B or 1440A amplifier (Molecular Devices) for the afferents and muscles ...
-
bioRxiv - Biophysics 2021Quote: ... Various locations were imaged every ∼3 minutes (every ∼5 mins for the ampicillin experiments) using automated routines (Metamorph, Molecular Devices). All single-cell growth experiments were performed in triplicates yielding a total of n = 1520 observations of dividing cells ...
-
bioRxiv - Neuroscience 2021Quote: ... digitized at 10–20 kHz and low-pass filtered at 2–5 kHz with a Digidata 1440A analog-to-digital converter and analyzed off-line using Clampfit 10.7 software (Molecular Devices). Intrinsic excitability was determined in response to increasing depolarizing current pulses (+75 pA ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence intensity measurements were collected every 30 sec on a SpectraMax M5 fluorometer using Softmax Pro 5 software (Molecular Devices; excitation and emission set to 410 nm and 490 nm ...
-
bioRxiv - Neuroscience 2020Quote: ... The steady-state voltage responses were plotted against the amplitude of current injection and the slope of the linear fit between −5 pA to −30 pA was used to define Rin (Clampfit v. 11.1; Molecular Devices). Time constant (tau ...