Labshake search
Citations for Molecular Devices :
1851 - 1900 of 2132 citations for Urea Nitrogen BUN Detection Kit 10 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... Data acquisition and analysis were performed using DigiData 1440A and 1550B digitizers and the analysis software pClamp 10 (Molecular Devices). Signals were filtered at 2 kHz and sampled at 10 kHz ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were low-pass filtered at 10 kHz and collected at 20 kHz with pCLAMP 10.7 (Molecular Devices, Sunnyvale, CA), or collected at 400 Hz with PowerLab (LabChart version 5.4.2 ...
-
bioRxiv - Neuroscience 2022Quote: ... 4-pole Bessel filter) and digitized at 10 kHz using Digidata 1322A digitizer driven by PClamp 9 software (Molecular Devices). Care was taken to maintain the access resistance as low as possible (usually 6–7 MΩ and always less than 10 MΩ) ...
-
bioRxiv - Neuroscience 2022Quote: ... Signals were low-pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 10.5 (Molecular Devices). All the electrophysiological recordings were extracted using Clampfit (Molecular Devices ...
-
bioRxiv - Neuroscience 2022Quote: ... digitized at 5-20 kHz and acquired using a Digidata 1440A digitizer and pClamp 10 software (all from Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: Recordings were performed using a Multiclamp 700A amplifier with a Digidata 1322 and pClamp 10 software (Axon, Molecular devices, LLC). Field excitatory postsynaptic potentials (fEPSP ...
-
bioRxiv - Pathology 2022Quote: ... Currents were digitally sampled at 10 kHz using Digidata 1322A digitizer hardware and pClamp 10.2 software (Molecular Devices, California, USA). For both ACMs and VCMs ...
-
bioRxiv - Molecular Biology 2022Quote: ... filtered at 2 kHz and digitized at 5 kHz using Digidata 1440A interface with pClamp 10 software (Molecular Devices Corporation). Series resistance was typically 5–20 MΩ ...
-
bioRxiv - Neuroscience 2024Quote: ... was induced with 0.5 s and 30 s pulses of green LED light triggered by pCLAMP 10 software (Molecular Devices). Data were excluded from the analysis if there was an absence of spiking prior to light onset ...
-
bioRxiv - Neuroscience 2023Quote: ... Whole-cell patch-clamp recordings were made using a Multiclamp 700B amplifier and pCLAMP 10 software (Molecular Devices; Sunnyvale, CA). Signals were digitized at 20–40 kHz and filtered at 10 kHz by Digidata 1440A (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... an Axopatch 200B amplifier and a Digidata 1322a digitizer (Axon Instruments) were utilized with Clampex software (version 10, Molecular Devices) for operation ...
-
bioRxiv - Neuroscience 2023Quote: ... The measured current was low-pass Bessel filtered at 1 kHz and digitized at 10 kHz with the Axon Digidata 1550B analog-digital converter and Clampex 10.2 Software (both from Molecular Devices). To stimulate the lch5 neurons ...
-
bioRxiv - Neuroscience 2023Quote: Whole-cell patch-clamp recordings were obtained with Multiclamp 700B amplifiers and pCLAMP 10 software (Molecular Devices; Sunnyvale, California, USA) and was guided using an Olympus BX51 Microscope equipped with both transmitted and epifluorescence light sources (Olympus Corporation ...
-
bioRxiv - Biochemistry 2023Quote: ... Data were sampled at 10 kHz and filtered at 5 kHz using a Digidata 1550A device controlled by pCLAMP 10.5 (Molecular Devices). Capacitance transients and leak currents were removed by subtracting a scaled control trace utilizing a P/4 protocol.
-
bioRxiv - Biochemistry 2023Quote: ... Signals were low-pass filtered at 10 kHz and sampled at 50 kHz with a Digidata 1440A digitizer (Molecular Devices). Current traces were idealized by using Clampfit 10.3 (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... high-pass filtering at 0.2 Hz and sampling at 10 kHZ using a Digidata 1320 A/D interface (Molecular Devices). LFP data was stored on a PC computer running AxoScope 10.3 software (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... A Multiclamp 700B amplifier and Digidata 1550A Low-Noise Data Acquisition Digitizer with Clampex 10 data acquisition software (Molecular Devices) were used to monitor synaptic currents ...
-
bioRxiv - Neuroscience 2023Quote: ... Data were low-pass filtered at 10 kHz and collected at 20 kHz with pClamp 10.7 (Molecular Devices, Sunnyvale, CA), or collected at 400 Hz with PowerLab (LabChart version 5.4.2 ...
-
bioRxiv - Neuroscience 2023Quote: ... Signals were digitized at 10 kHz for field and 30 kHz for intracellular recordings (#Axoclamp2B and Digidata 1440A, Molecular Devices). For sharp intracellular recordings ...
-
bioRxiv - Neuroscience 2023Quote: ... and data were digitized at 10 kHz and filtered at 1-2 kHz using a 1440A Digidata Digitizer (Molecular Devices). Series and input resistances (10-20 MΩ ...
-
bioRxiv - Biophysics 2024Quote: ... Data were acquired at 50 kHz and low-pass filtered at 10 kHz (Axon 200B and Digidata 1550A; Molecular Devices) and further filtered at 1 kHz during analysis ...
-
Direct and indirect regulation of β-glucocerebrosidase by the transcription factors USF2 and ONECUT2bioRxiv - Molecular Biology 2024Quote: The plate was centrifuged at 1,000 g for 10 min before fluorescence intensity was read at a VersaMax Microplate Reader (Molecular Devices) or a GloMax® Discover (Promega ...
-
bioRxiv - Cell Biology 2020Quote: ... were acquired at 20–100 kHz and filtered at 5–10 kHz (low-pass Bessel filter) using a computer attached to a DigiData 1200 (Molecular Devices). Patch pipettes were pulled from borosilicate glass (Kimble® Queretaro ...
-
bioRxiv - Developmental Biology 2021Quote: ... Data were acquired in current clamp mode using an Axopatch 200B amplifier and Digidata 1440A digitizer coupled to pClamp 10 software (Molecular Devices). Data were digitized at 10 kHz and filtered at 1 kHz ...
-
bioRxiv - Neuroscience 2022Quote: ... Stimulation and data acquisition were sampled at 10 kHz and low pass filtered at 4kHz using a Multiclamp 700B amplifier (Molecular Devices) and Im-Patch© open-access software http://impatch.ifc.unam.mx ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were acquired using a Multiclamp 700B amplifier and digitized at 10 kHz with a Digidata 1440a digitizer (both from Molecular Devices). Data was then either analyzed using Clampfit 10.7 Software (Molecular Devices ...
-
bioRxiv - Neuroscience 2021Quote: ... The electrophysiological signals and behavioral camera triggers were digitized at 10 kHz via a Digidata 1440A and saved to a computer (Clampex, Molecular Devices). The oviDN or oviDN-like subtype (Extended Data Fig ...
-
bioRxiv - Neuroscience 2021Quote: ... All recordings were obtained using a Multiclamp 700B amplifier and filtered at 10 KHz (Molecular Devices, San Jose, CA, USA, RRID:SCR_018455), converted with an 18-bit 200 kHz A/D board (HEKA ...
-
bioRxiv - Neuroscience 2021Quote: ... The bath temperature was monitored with an IT-18 T-thermocouple connected to a Physitemp BAT-12 thermometer (Physitemp Instruments) and digitized with an Axon Digidata 1440A converter and Clampex 10 software (Molecular Devices). Temperature and cellular calcium signals were recorded simultaneously ...
-
bioRxiv - Neuroscience 2021Quote: ... Electrophysiological data were low-pass filtered at 4 kHz and digitized at 10 kHz using a MultiClamp 700B amplifier (Molecular Devices) and an ITC-18 acquisition board (Instrutech ...
-
bioRxiv - Neuroscience 2020Quote: ... All recordings were obtained under current-clamp configuration using a Multiclamp 700B amplifier and a 10 kHz low-pass filter (Molecular Devices). All traces were digitized at 10 kHz ...
-
bioRxiv - Developmental Biology 2022Quote: Whole-cell current-clamp recordings were obtained using a Multiclamp 700A patch-clamp amplifier and recorded with pClamp 10 (Molecular devices) at a sampling rate of 20–50 kHz ...
-
bioRxiv - Cell Biology 2019Quote: ... digitized on-line at 10 kHz using an analog-to-digital converter and Clampex 10.5 (Molecular Devices, San Jose, CA, USA) software ...
-
bioRxiv - Cell Biology 2019Quote: ... Signal was low-pass filtered at 1 kHz and digitized at 10 kHz with a Digidata 1440A or 1550 (Molecular Devices). Neurons with a series resistance (Rs ...
-
bioRxiv - Physiology 2019Quote: ... The recorded signals were digitized at 4 to 10 kHz and filtered at one third of the sampling rate using a Digidata 1550B plus with hum silencer (Molecular Devices). All commands and recorded signals were handled using pClamp 10 software (Molecular Devices) ...
-
bioRxiv - Bioengineering 2019Quote: Somatic recordings from cultured neurons were performed at room temperature in the whole-cell voltage-clamp mode using a Multiclamp 700B controlled by pClamp 10 acquisition software (Molecular Devices). Currents were filtered at 2-3 kHz and sampled at 10 kHz using a Digidata 1440 A (Molecular Devices) ...
-
bioRxiv - Evolutionary Biology 2019Quote: ... Data acquisition and analysis were carried out with Digidata 1440A and pCLAMP™10 software (Molecular Devices, San Jose, CA, USA). Odorants were considered as active if the mean response they elicited was statistically different from 0 (Wilcoxon signed rank test) ...
-
bioRxiv - Cell Biology 2019Quote: The hiPSC-CMs were plated on 10 mm glass coverslips at 1.0 × 104/cm2 and APs were recorded 8-10 days later using the perforated patch-clamp technique and an Axopatch 200B amplifier (Molecular Devices). Single cells with spontaneous contractions (indicating the viable state of the cells ...
-
bioRxiv - Cancer Biology 2020Quote: ... Destaining for quantification was performed using 10% acetic acid and absorbance was read at 590 nm using a spectrophotometer (SpectraMax iD3, Molecular Devices). An average value of non-targeting vehicle was generated ...
-
bioRxiv - Neuroscience 2020Quote: ... and were digitized off-line at 10 kHz (low-pass filtered at 2 kHz with an 8-pole Bessel filter) using pCLAMP9 software (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... The signal for all voltage-clamp recordings was filtered at 1 kHz and digitized at 10 kHz with a digitizer (Molecular Devices). For voltage-clamp recordings ...
-
bioRxiv - Biophysics 2022Quote: Transduction currents were recorded from IHCs using a Nikon Eclipse FNI microscope with 60X LWI objective and DIC optics and an Axopatch 200B patch clamp with a Digidata 1440 digitizer controlled by pCLAMP 10 software (Molecular Devices). The whole-cell voltage-clamp configuration was used for recordings ...
-
bioRxiv - Bioengineering 2021Quote: ... EPSPs were measured in the CA1 at 10 kHz using a glass capillary microelectrode filled with aCSF (3-4 MΩ) with a MultiClamp 700B Microelectrode Amplifier (Molecular Devices), Fig ...
-
bioRxiv - Neuroscience 2020Quote: ... action potential threshold and time to first action potential peak were determined with the first action potential fired with the lowest stimulation current as assessed by pClamp 10 software (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... Currents were low-pass filtered at 2 kHz and digitized at 20 kHz using an Axon Digidata 1440A data acquisition system and pClamp 10 software (both from Molecular Devices). Series resistance (Rs ...
-
bioRxiv - Neuroscience 2019Quote: ... Recordings were made from one to four electrode headstages that were amplified and low-pass filtered at 10 kHz using Multiclamp 700B amplifiers (Molecular Devices). Signals were digitized at 25-100 kHz using ITC-18 digitizers (Heka) ...
-
bioRxiv - Cell Biology 2020Quote: ... The data from whole-cell patch-clamp recordings were acquired at 10 kHz and filtered at 5 kHz for analysis (Axopatch 200B amplifier with pCLAMP software, Molecular Devices). Membrane potential was clamped at 0 or −60 mV and voltage ramp-pulses from −100 to +100 mV (300 ms ...
-
bioRxiv - Biophysics 2021Quote: ... The analog current signal was low-pass filtered at 1 kHz (Bessel) and digitized at 10 kHz with a Digidata 1550A digitizer (Molecular Devices). Digitized data were recorded on a computer using the software pClamp (Molecular Devices ...
-
bioRxiv - Biophysics 2021Quote: ... The measured membrane currents were low-pass filtered at 5 kHz and digitized at 10 kHz using a Digidata 1440A device (Molecular Devices). Data analysis was performed with Clampfit 10.2 (Molecular Devices ...
-
bioRxiv - Cancer Biology 2021Quote: ... 10 mM Tris base was added to the cells and absorbance was measured on a VersaMax Tunable Microplate Reader (Molecular Devices). To assess cell viability ...