Labshake search
Citations for Molecular Devices :
601 - 650 of 1100 citations for 10 14 Cadinene 4 5 Diol since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2024Quote: ... 25 µL per well incubated at 37°C for 4 h and read at 544 nm excitation and 590 nm emission using SpectraMax M5 (Molecular Devices)) or brightfield imaging of attached cells using Incucyte S3 (Sartorius) ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... lowpass filtered (1 kHz) and sampled at 2 kHz (IKs) or 4 kHz (other currents) by the A/D converter Digidata 1440A (Molecular Devices). Signals were further filtered (4-pole Bessel filter ...
-
bioRxiv - Biochemistry 2024Quote: ... The absorbance of the samples following 4 hours of incubation at room temperature were measured using a SpectraMax M5 plate reader (Molecular Devices)
-
bioRxiv - Neuroscience 2020Quote: ... Images were acquired at 37°C in a temperature-controlled chamber under 5% CO2 using Metamorph software (Molecular Devices), for periods of 10 min with a confocal Z-series stack of 10μm (921×1024 pixels ...
-
bioRxiv - Biophysics 2022Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Biophysics 2021Quote: ... Data was filtered at 5 kHz and recorded at a 200 kHz sampling rate with program Clampex (Molecular Devices). Experiments were carried out in symmetrical 200 mM KCl ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... a baseline read of luminescent signal was serially recorded over 5 min using a Flexstation 3 instrument (Molecular Devices) at 37°C before addition of the indicated concentration of ligand ...
-
bioRxiv - Neuroscience 2022Quote: ... These signals were recorded in frequencies of 0 - 5 kHz and digitized at 50 kHz (Digidata 1322A, Molecular Devices). For assessing evoked synaptic field potentials ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were stained with the FLIPR calcium indicator Calcium 5 Assay Kit (Molecular Devices Corp., Sunnyvale, CA, USA) to image the Ca2+-transients evoked by capsaicin addition ...
-
bioRxiv - Neuroscience 2024Quote: ... Current signals were low-pass filtered at 5 kHz and sampled at 20 kHz using pCIamp10.3 or 10.7 (Molecular Devices). Series resistance was compensated between 85 – 90% in experiments for Figures 1-5 ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were filtered at 1 kHz and sampled at 5 kHz with Digidata 1322A interface and Clampex 9.2 and 10.6 from pClamp software (Molecular Devices). Pipettes (from borosilicate capillaries ...
-
bioRxiv - Biophysics 2024Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Biophysics 2023Quote: ... Signals were filtered at 5 kHz and sampled at 20 kHz prior to acquisition with Clampex 10.6 (Molecular Devices). A voltage step protocol using a holding potential of 0 mV for 0.2 s was performed prior to 20 mV incremental voltage steps ...
-
bioRxiv - Neuroscience 2023Quote: ... a measurement (Ex412/Em480) taken every 5 sec for 600 sec on a SpectraMax M5 multimode reader (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... 3 - 5 ms (DAPI), 150 - 250 ms (GFP) and 2,000 - 3,000 ms (Cy3, Cy5, mCherry) using MetaMorph software (Molecular Devices) at 0.133 µm/pixel (Figure 1) ...
-
bioRxiv - Biophysics 2022Quote: ... Signals were low-pass-filtered at 1 kHz and read into a computer at a digitization rate of 4 kHz with pClamp10 (Axon Instruments, Molecular Devices Corp). Depolarizing solution was applied 3 s after the start of acquisition for 6 s ...
-
bioRxiv - Neuroscience 2020Quote: ... Signals were recorded with a low-pass filtered at 4 kHz using a Multiclamp 700B amplifier (Molecular Devices, San Jose, CA, USA) and digitized at 20 kHz using a Digi-data 1440A interface coupled to pClamp 10.5 software (Molecular Devices ...
-
bioRxiv - Neuroscience 2024Quote: ... λEM: 516 nm (F340/F380)) were measured every 4 s using a FlexStation 3 fluorescent microplate reader (Molecular Devices, Sunnyvale, CA, USA). During the measurements ...
-
bioRxiv - Physiology 2023Quote: ... ventricular myocytes were isolated by combining enzymatic tissue digestion and mechanical trituration (supplement for details).32 Transmembrane voltage (Vm) was continuously recorded using a glass pipette (2-4 MΟ tip) and an Axoclamp 2B amplifier (Molecular Devices, Ca) in bridge mode (supplement for details).33 To elicit an AP ...
-
bioRxiv - Physiology 2023Quote: Water samples were analysed for total ammonia (NH3/4 +) colourometrically (Verdouw et al.) in triplicate using a SpectraMax 190 microplate reader (Molecular Devices, USA) as in Sackville et al ...
-
bioRxiv - Biophysics 2021Quote: ... Various locations were imaged every ∼3 minutes (every ∼5 mins for the ampicillin experiments) using automated routines (Metamorph, Molecular Devices). All single-cell growth experiments were performed in triplicates yielding a total of n = 1520 observations of dividing cells ...
-
bioRxiv - Neuroscience 2021Quote: ... digitized at 10–20 kHz and low-pass filtered at 2–5 kHz with a Digidata 1440A analog-to-digital converter and analyzed off-line using Clampfit 10.7 software (Molecular Devices). Intrinsic excitability was determined in response to increasing depolarizing current pulses (+75 pA ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence intensity measurements were collected every 30 sec on a SpectraMax M5 fluorometer using Softmax Pro 5 software (Molecular Devices; excitation and emission set to 410 nm and 490 nm ...
-
bioRxiv - Neuroscience 2020Quote: ... The steady-state voltage responses were plotted against the amplitude of current injection and the slope of the linear fit between −5 pA to −30 pA was used to define Rin (Clampfit v. 11.1; Molecular Devices). Time constant (tau ...
-
bioRxiv - Microbiology 2021Quote: ... incubating 1 hour at 37ºC 5% CO2 and measuring fluorescence (λEX = 540 nm, λEM = 590 nm) on a SpectraMax M5 (Molecular Devices). The IC50 was calculated using GraphPhad Prism 9 using a non-linear regression analysis ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... was added and plates were gently shaken for 5 s to mix and then absorbance (O.D.) was measured at 450/620 nm on a SpectraMax M5 (Molecular Devices) instrument and data were processed by SoftMax Pro 6.4 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2021Quote: ... with a high-pass Bessel (8-pole) filter with a −3 dB cutoff of 5 Hz using Clampfit 10.6 (Molecular Devices). All data was analyzed using NeuroMatic in Igor Pro software (WaveMetrics ...
-
bioRxiv - Physiology 2021Quote: ... Currents were filtered at 1 kHz and digitized at 5 kHz using an Axopatch 200B amplifier and Clampex 10.4 (Molecular Devices. Offline analysis was performed using Clampfit 10.4 ...
-
bioRxiv - Immunology 2021Quote: ... DAF fluorescence intensities were measured every 5 minutes for a total of 60 minutes using a SpectraMax iD3 (Molecular Devices). All experiments were repeated at least four times per batch.
-
bioRxiv - Neuroscience 2024Quote: ... Electrophysiological recordings were obtained from one neuron per slice and 4-5 slices per mouse using a Multiclamp 700B amplifier and analyzed using a digital system (pClamp version 11.2, Molecular Devices). Series and input resistances were monitored throughout the experiment using a -5 mV pulse ...
-
bioRxiv - Neuroscience 2024Quote: Currents were filtered at 5 kHz using low-pass Bessel filter of the amplifier and digitized using a Digitata 1,440 unit (Molecular Devices). All voltage clamp measurements were performed at a holding voltage of -60 mV ...
-
bioRxiv - Neuroscience 2024Quote: ... were plotted against the amplitude of current injection and the slope of the linear fit between −5 pA to −30 pA was used to define Rin (Clampfit v. 11.2; Molecular Devices). Time constant (tau ...
-
bioRxiv - Systems Biology 2022Quote: ... and the EtBr accumulation was measured by measuring the fluorescence in a microplate reader (spectramax multimode M 5, Molecular devices) at 37°C using 530 nm excitation wavelength and 585 nm as the emission wavelength ...
-
bioRxiv - Neuroscience 2023Quote: Spontaneous IPSCs were detected and analyzed for 5-minute epochs during baseline and following drug exposure (Clampfit 11.1, Molecular Devices). For electrically-evoked IPSCs ...
-
bioRxiv - Neuroscience 2024Quote: ... Continuous current traces of 5-min duration (recorded at least 5 min after achieving whole-cell configuration) were acquired and analyzed with Clampfit 10.7 (Molecular Devices). The frequency and amplitude of recorded sIPSCs were quantified.
-
bioRxiv - Neuroscience 2024Quote: ... We detected the evoked qEPSCs 0.5-1.5s after the light onset and calculated the average number of qEPSCs from 5 sweeps using Clampfit 11 (Molecular Devices).
-
bioRxiv - Biophysics 2020Quote: ... Data were acquired at 2 kHz and analyzed using the pClamp 10 software (Molecular Devices, USA). Because extracellular divalent cations (such as ...
-
bioRxiv - Developmental Biology 2021Quote: ... The electrical signals from the zebrafish heart received were recorded by pCLAMP 10 software (Molecular Devices) after amplification via Multiclamp 700B amplifier (Molecular Devices ...
-
bioRxiv - Neuroscience 2021Quote: ... and digitized at 10-20 kHz using Digidata 1440A and pClamp 10.5/10.7 software (Molecular Devices). Recordings were low-pass filtered at 2 kHz and membrane potential was corrected for liquid junction potential (11 mV) ...
-
bioRxiv - Neuroscience 2021Quote: ... and optogenetic LED triggers were all digitized at 10 kHz on a Digidata 1440A (Molecular Devices) and saved to a computer (Axoscope ...
-
bioRxiv - Bioengineering 2021Quote: ... The luminescence was read within 10 minutes on Spectramax i3x or iD3 plate readers (Molecular Devices) with the following settings ...
-
bioRxiv - Biochemistry 2020Quote: ... The signals were digitized with a Digidata 1440A using pClamp 10 software (both from Molecular Devices). Patch pipettes with resistances of 2-4 MΩ were fabricated from borosilicate glass ...
-
All-trans retinoic acid induces synaptopodin-dependent metaplasticity in mouse dentate granule cellsbioRxiv - Neuroscience 2021Quote: ... pre-amplifier (Astro-Med) and digitized at a 10 kHz sampling rate (Digidata 1440A, Molecular Devices). Extracellular stimulation was performed using a STG1004 stimulator (Multichannel Systems) ...
-
bioRxiv - Neuroscience 2021Quote: Data was acquired using Clampex 10 and Axon Digidata 1440 digitizer (Molecular Devices, Union City, CA) at 20 kHz and were low-pass filtered at 2 kHz with a four-pole Bessel filter ...
-
bioRxiv - Neuroscience 2021Quote: ... The voltage signals were recorded with MultiClamp 700B and Clampex 10 data acquisition software (Molecular Devices). After establishment of the whole-cell configuration and equilibration of the intracellular pipette solution with the cytoplasm ...
-
bioRxiv - Neuroscience 2020Quote: ... Data were acquired using 10 kHz sampling rate and amplified x10 by Axoclamp 2A (Molecular Devices). The signal was further amplified x100 and low-pass filtered at 1kHz (LPBF-48DG ...
-
bioRxiv - Neuroscience 2020Quote: ... All signals were sampled at 10 kHz 16-bit (Digidata 1440A with pCLAMP10 Software, Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... Recordings were sampled at 10 KHz with a Multiclamp 700B amplifier Digidata 1400 digitizer (Molecular Devices) and were rejected if IHolding exceeded ± 100 pA from −70 mV in voltage camp or if Vm changed more than 15% in current clamp ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell currents were recorded on Axopatch-200B amplifier using pClamp 9 or 10 (Molecular Devices). The cells were held at −90 mV ...
-
bioRxiv - Biophysics 2020Quote: ... low-pass filtered (10 kHz; Axopatch 200B) and sampled at 40 kHz (Molecular Devices; DigiData 1440A). All data were acquired with QuB software (University at Buffalo ...