Labshake search
Citations for 3M :
101 - 150 of 238 citations for 7 methoxy 4 4 dimethylisochroman 1 3 dione since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... One SCX StageTip was prepared per sample using 3 plugs of SCX material (3M) topped with 2 plugs of C18 material ...
-
bioRxiv - Molecular Biology 2020Quote: ... 2 μg of total RNA dots were added to a nitrocellulose membrane previously washed with SSC 2X buffer (SSC 20X: NaCl 3M, sodium citrate 300 mM, pH 7). The membrane was incubated for 5 min at 65°C and exposed to 400 mJ/cm2 of 254 nm UV in a UV crosslinker (Biolink Shortwave 254 nm) ...
-
bioRxiv - Molecular Biology 2019Quote: ... blots were hybridized overnight at 42°C with 5’-end P32-labelled oligonucleotides in Roti-Hybrid-Quick buffer (Roth) and washed three times at 42°C for 15min with SSC buffer (SSC 20X: 3M NaCl, 300mM sodium citrate, pH 7) containing 0.1% of SDS (5X ...
-
bioRxiv - Cell Biology 2020Quote: ... One SCX StageTip was prepared per sample using 3 plugs of SCX material (3M, cat. #2251) topped with 2 plugs of C18 material ...
-
bioRxiv - Neuroscience 2021Quote: ... Spinal cords were secured directly to an agar block (3 % agar) with VetBond surgical glue (3M) and glued to the base of the slicing chamber with cyanoacrylate adhesive ...
-
bioRxiv - Neuroscience 2023Quote: ... Spinal cords were secured directly to an agar block (3 % agar) with VetBond surgical glue (3M) and the block glued to the base of the slicing chamber with cyanoacrylate adhesive ...
-
bioRxiv - Neuroscience 2021Quote: ... the skull was scrubbed with 3% H2O2 and covered with a thin layer of cyanoacrylate (Vetbond, 3M). Craniotomies were drilled over each brain area of interest ...
-
bioRxiv - Physiology 2021Quote: ... The pipette was removed 3 min post-injection followed by wound closure using tissue adhesive (3M Vetbond). For viral injections into the NTS and VLM ...
-
bioRxiv - Cell Biology 2021Quote: ... The pipette was removed 3 min post-injection followed by wound closure using tissue adhesive (3M Vetbond). For viral injections into the VLM ...
-
bioRxiv - Neuroscience 2022Quote: ... The pipette was removed 3 min post-injection followed by wound closure using tissue adhesive (3M Vetbond). An optic fiber (200 μm diameter ...
-
bioRxiv - Cell Biology 2023Quote: ... Coverslips were washed twice with PBS before being exposed to pre-extraction buffer (25 mM HEPES pH 7.4, 50 mM NaCl, 3 mM MgCl2, 0.5% Triton-X-100, 0.3M Sucrose) for 10 min ...
-
bioRxiv - Biochemistry 2023Quote: ... 20 μL) and desalted using C18 stage tips prepared in-house using 3 x C18 discs (3M Empore) stacked in 200 μL pipette tips ...
-
Osh6 requires Ist2 for localization to the ER-PM contacts and efficient phosphatidylserine transportbioRxiv - Cell Biology 2020Quote: ... resuspended in 50 μl of sample buffer with urea (50 mM Tris-HCl, pH 6.8, 100 mM DTT, 3% SDS, 3M urea ...
-
bioRxiv - Cancer Biology 2019Quote: ... Beads were washed once with Guanidine LB and 3 times with Urea wash buffer (8M urea, 50mM NaHPO4 buffer pH:8, 0.3M NaCl ...
-
bioRxiv - Molecular Biology 2019Quote: ... the beads were washed 3 times with ice-cold NET-150 buffer and suspended in 200 µL of RNA extraction buffer (0.3M NaOAc ...
-
Potential for virus endogenization in humans through testicular germ cell infection: the case of HIVbioRxiv - Microbiology 2020Quote: ... washed in PBS and incubated in a blocking/permeabilizing solution (0.3M Glycine, 0.05%Triton-X, 3% BSA, 1X PBS) for 30 min at RT ...
-
bioRxiv - Systems Biology 2020Quote: ... the nuclei pellet was resuspended in 3 mL buffer consisted of one part buffer B and two parts buffer C (2.3M sucrose ...
-
bioRxiv - Neuroscience 2020Quote: ... and Western Blotting samples were denatured at 94°C for 5 minutes in 3 x SDS sample buffer (150mM Tris pH 8, 6% SDS, 0.3M DTT ...
-
Autocrine Sfrp1 inhibits lung fibroblast invasion during transition to injury induced myofibroblastsbioRxiv - Cell Biology 2022Quote: ... Antibodies were then eluted by incubating the samples in an elution buffer (0.5 M L-glycine, 3 M Urea, 3M Guanidium Chloride ...
-
bioRxiv - Biochemistry 2022Quote: ... Pooled TMT labeled peptides were fractionated using the high pH reverse-phase peptide fractionation kit (Pierce) into 3 fractions (20%, 25%, and 50% acetonitrile in 0.1% triethylamine) and desalted with Empore-C18 (3M) in-house packed StageTips prior to analysis by mass spectrometry ...
-
bioRxiv - Neuroscience 2023Quote: ... we glued its backside to the copper plate using 3-component dentist glue (Protemp™ II, 3M, Neuss, Germany). A fine tetrode wire (Redi Ohm 800 ...
-
bioRxiv - Neuroscience 2024Quote: ... sections were rinsed three times with dH20 and incubated in equal amounts of dH20 and elution buffer (3×5min; 0.5M L-glycine, 3M urea, 3M guanidine hydrochloride ...
-
bioRxiv - Neuroscience 2024Quote: ... sections were rinsed three times with dH20 and incubated in equal amounts of dH20 and elution buffer (3×5min; 0.5M L-glycine, 3M urea ...
-
bioRxiv - Neuroscience 2023Quote: ... by cutting a 5 mm square hole in 3 layers of Highland electrical insulation tape (3M, Saint Paul, Minnesota) and covering the bottom with a translucent white plastic square (cut from a Farmland Traditions dog treat bag) ...
-
bioRxiv - Developmental Biology 2020Quote: ... Supernatants volume corresponding to 20 μg of total tryptic peptides per sample were loaded onto C18 StageTips (Rappsilber & Mann, 2007) containing 3 disks of Empore C18 material (3M). Prior to sample loading ...
-
bioRxiv - Biophysics 2021Quote: ... using two strips (3 mm wide) of optically clear double-stick adhesive tape (50 µm thick, 3M™, #8212, USA). 50 µl of actin or actin-DNA sensor solution was carefully deposited in the middle of the chamber before closing it ...
-
bioRxiv - Neuroscience 2021Quote: ... A 3 mm coverslip was placed on the brain and fixed with dental cement (RelyX®, 3M-ESPE, Neuss, Germany). More than twenty GFAP-EGFP/PLP-DsRed1 and ten PLP-EGFPmem/GFAP-mRFP1 mice were investigated up to ten times in between 30 days after the injury at different time intervals ...
-
bioRxiv - Genomics 2019Quote: ... We filled a 200 μl pipette tip with 6 mg of C18 matrix (Reprosil-Pur Basic C18, 3 μm, Dr. Maisch GmbH) on top of a C18 disk plug (EmporeTM C18, 3M). We dissolved 50 μg of vacuum-dried peptides with 150 μl of pH10 ABC buffer and loaded it onto the pre-equilibrated C18 tip ...
-
bioRxiv - Plant Biology 2021Quote: ... Peptides were desalted and pre-fractionated (in 3 fractions) by stage-tipping using Empore Styrenedivenylbenzene Reversed Phase Sulfonate material (SDB-RPS; 3M) (Kulak et al. ...
-
bioRxiv - Immunology 2020Quote: ... Labeled samples were acidified using triflouroacetic acid (TFA) and cleaned-up using StageTip (3-disc plug of C18 Empore material, 3M). StageTip’s were conditioned by rinsing them with (2x ...
-
bioRxiv - Neuroscience 2022Quote: ... The exposed brain was covered with sterile saline and sealed with a 3-mm square borosilicate coverslip glass (CS-3S, Warner Instruments) using cyanoacrylate glue and tissue adhesive (1469SB; 3M). For nNOS neuron specific GCaMP7f expression ...
-
bioRxiv - Neuroscience 2023Quote: ... and a glass cranial window (diameter, 3 mm; thickness, 100-150 µm) was placed and secured over the craniotomy using cyanoacrylate adhesive (3M) and dental cement ...
-
bioRxiv - Neuroscience 2023Quote: Sharp electrode recording: G150F-3 (borosilicate: standard wall with filament, Warner Instruments) capillaries were loaded with internal solution (3M KCl) through microfil/microloader tips ...
-
bioRxiv - Bioengineering 2023Quote: ... resulting in monodisperse droplets with an average diameter of 18 µm (∼3 pL volume).52 The carrier oil phase was HFE 7500 (3M) with 1% (w/w ...
-
bioRxiv - Microbiology 2023Quote: ... Proteins were digested with LysC and trypsin overnight at room temperature and purified on StageTips with 3 layers of C18 Empore filter discs (3M) and analyzed by LC-MS/MS using an Easy nanoLC system coupled to a Q-Exactive HF mass spectrometer (Thermo Fisher Scientific) ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were acidified using 1% TFA and peptides separated into 3 fractions on a 200 µL StageTips packed with three Empore™ SPE Disks SDB-RPS (3M) according to a previously published protocol (Kulak et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... were pulled to a fine tip (PN-3,Narishige) to create recording electrodes (25–50 M resistance, backfilled with 3M KCl) and firepolished (Microforge MF-830 ...
-
bioRxiv - Bioengineering 2021Quote: ... The membrane strips were then fixed in place by 3 mm wide and 2 cm long double-sided tape strips (3M, USA) placed parallel to the longest side of the HoC ...
-
bioRxiv - Cell Biology 2023Quote: ... The supernatant was loaded onto equilibrated stage tips prepared in house by stacking 3×14G styrene divinylbenzene (SDB)-XC layers (Empore Solid Phase Extraction Products, 3M, Eagan, MN, USA) into a 200 μL Eppendorf tip (Granata et al. ...
-
bioRxiv - Genomics 2022Quote: ... Cells are then resuspended in 10ml Sucrose/Glycerol buffer (1:1) (Sucrose Buffer: 0.3M Sucrose; 1% Triton-X (Sigma Aldrich); 10mM HEPES (Thermo Fisher Scientific ...
-
bioRxiv - Microbiology 2021Quote: ... faecalis corresponding to 2-3 × 106 CFU was added to the wound site and sealed with a transparent dressing (Tegaderm™ 3M, St Paul Minnesota, USA). At the indicated time points ...
-
bioRxiv - Neuroscience 2021Quote: ... A borosilicate recording electrode (1-3MΩ) filled with 1M NaCl was placed in CA1 stratum radiatum and a monopolar stimulating electrode placed on Schaffer collaterals between CA3 and CA1 ...
-
bioRxiv - Bioengineering 2024Quote: ... 1% sodium pyruvate (100 × 10-3M) and 1% penicillin-streptomycin-glutamine solution (100X) ...
-
bioRxiv - Cell Biology 2023Quote: ... exchanged into a 1:1 volume mixture of 1X PBST and smiFISH Wash Buffer [10% 20X SSC (20X SSC: 0.3M sodium citrate ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The emulsion of collected droplets was broken by adding 1H,1H,2H-2H-Perfluoro-octanol in a 1:1 (v/v) ratio with HFE-7500 (3M) and 100 µl 2 ng/µl salmon sperm DNA (Thermo) ...
-
bioRxiv - Neuroscience 2023Quote: ... 5 total sections (1 each from 3M/2F) were used for the Chst9 population validation experiment ...
-
bioRxiv - Microbiology 2019Quote: ... 1 mL of Quenching Buffer (3M ethanolamine, pH 9.0) was added ...
-
bioRxiv - Cell Biology 2019Quote: ... and then incubated in block solution (1% BSA, 0.3M glycine and 10% goat serum in 0.5% PBST ...
-
bioRxiv - Neuroscience 2023Quote: ... and 6 total sections (1 each from 3M/3F) were used for each of the MSN marker experiment ...
-
bioRxiv - Cell Biology 2023Quote: ... and incubated for 1 hour at room temperature in Blocking Solution (PBS containing 1% BSA, 10% FBS, 0.3M glycine and 0.1% Tween-20). The fixed cells were incubated with a mixture of the primary antibodies in PBS overnight at 4°C ...