Labshake search
Citations for 3M :
151 - 200 of 259 citations for 6 Quinoxalinamine 2 3 5 trimethyl 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were then incubated in permeabilization solution (0.1% TritonX-100, 5% serum, 0.3M glycine in 1xPBS) for 1hr at RT ...
-
bioRxiv - Biochemistry 2023Quote: ... followed by 5 CV of high salt buffer (25 mM Tris-HCl, pH 7.5, 3M NaCl). After re-equilibration of the column with buffer A ...
-
bioRxiv - Molecular Biology 2023Quote: ... we included 5 healthy pediatric controls with a median age of 8.0 ± 3.28 years (2F/3M). Clinical data were extracted from the medical record and included complete blood count and medical history (as described in Table 1).
-
bioRxiv - Neuroscience 2024Quote: ... mice received a daily topical application of 12.5 mg Aldara® cream (5% imiquimod; 3M Pharmaceuticals) on the shaved cheek skin ...
-
bioRxiv - Molecular Biology 2020Quote: ... Pellets were resuspended in SDS-Tris solution (2% SDS and Tris 0.3M pH 10.7), boiled during 5 min and cleared by centrifugation at maximum speed for 2 min ...
-
bioRxiv - Genomics 2019Quote: ... Samples were spun down and supernatant was ethanol precipitated (0.3M NaOAc, 2 μl Glycoblue). Concentration and size of nascent RNA was assessed by Nanodrop and TapeStation 2200 ...
-
bioRxiv - Cell Biology 2020Quote: ... Desalting tips were prepared by using 2 layers of Empore C18 material (3M, #15334911) stacked in a 200 µl pipet tip ...
-
bioRxiv - Molecular Biology 2020Quote: ... One StageTip was prepared per sample using 2 plugs of Styrene Divinylbenzene (SDB) (3M) material ...
-
bioRxiv - Cell Biology 2023Quote: ... Peptides were purified via STAGE tips (C18 disc, 3M Empore, Cat#14-386-2) and dissolved in buffer A (0.1% formic acid in MS grade water ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were acidified using 1% TFA and peptides separated into 3 fractions on a 200 µL StageTips packed with three Empore™ SPE Disks SDB-RPS (3M) according to a previously published protocol (Kulak et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... were pulled to a fine tip (PN-3,Narishige) to create recording electrodes (25–50 M resistance, backfilled with 3M KCl) and firepolished (Microforge MF-830 ...
-
bioRxiv - Neuroscience 2023Quote: ... The pipette was removed after 3-4 minutes waiting time and the wound edges were stitched or closed by Vetbond surgical glue (3M, Hungary). The animals were continuously monitored and observed for the signs of pain ...
-
bioRxiv - Molecular Biology 2019Quote: ... Fragmented RNA samples were then mixed with 1/10 volume of Na-acetate (3M, pH 5, Sigma) and 2.5 volumes of EtOH and incubated for 1 hour at −80°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... The picoinjection chip was filled with 5% (w/w) 008-FluoroSurfactant (RAN Biotechnologies) in HFE-7500 (3M) using a pre-filled 2.5-ml glass syringe (SGE ...
-
bioRxiv - Microbiology 2023Quote: ... followed by addition of 0.5 mL of CTAB buffer (5% CTAB, 0.25M phosphate buffer pH 8.0, 0.3M NaCl) and 50 μL of 0.1M aluminum ammonium sulfate ...
-
bioRxiv - Microbiology 2019Quote: ... re-suspended in 2 ml of NTA buffer (50 mM NaH2PO4, pH 8.0, 0.3M NaCl) containing 2 mg lysozyme ...
-
bioRxiv - Bioengineering 2019Quote: ... Slides are immersed in a bath of 2% w/w IK in FC-70 (3M) during printing operation.
-
bioRxiv - Cancer Biology 2022Quote: ... peptides were loaded on Stage-tips with 2 punches of SDB-XC material (Empore 3M). HLA-I and HLA-II peptides were eluted in three fractions with increasing concentrations of ACN (HLA-I ...
-
bioRxiv - Immunology 2020Quote: ... peptides were loaded on Stage-tips with 2 punches of SDB-XC material (Empore 3M) and eluted in three fractions with increasing concentrations of ACN (5% ...
-
bioRxiv - Neuroscience 2022Quote: ... The 2 parts of the brain were individually placed in 400μl of HCl (10−3M).
-
bioRxiv - Microbiology 2023Quote: ... peptides were loaded on Stage-tips with 2 punches of SDB-XC material (Empore 3M). HLA-II peptides were eluted in three fractions with increasing concentrations of ACN (5% ...
-
bioRxiv - Bioengineering 2021Quote: ... resin composite layers were built up in 1-mm-thick increments to 3 mm thickness (Z250, 3M ESPE, St. Paul, MN, USA). After being stored in deionized water at 37°C for 24 h ...
-
bioRxiv - Neuroscience 2024Quote: ... Resulting protein digests equivalent to 5 µg were desalted using StageTip (SDB-XC, 3M, St. Paul, MN, USA)51 ...
-
bioRxiv - Bioengineering 2019Quote: ... containing 1 (Fab’) or 2 (mAb) molar equivalents of tri-mutant sortase A Δ59 (3M srt) (23) ...
-
bioRxiv - Bioengineering 2019Quote: ... and (c) 35% PA plus Adper Single Bond 2 (SB) (3M/ESPE, St Paul, MN, USA) applied per manufacturer recommendations (Supplementary information) ...
-
bioRxiv - Neuroscience 2024Quote: ... the implant was sealed using dental cement and/or UV cement (3M RelyX Unicem 2 Automix), ensuring that only the docking module was cemented.
-
bioRxiv - Molecular Biology 2024Quote: ... 2X PK buffer (0.2M Tris-HCl [pH 7.5], 25mM EDTA, 0.3M NaCl, 2% [w/v] SDS) was added to stop the reaction ...
-
bioRxiv - Cell Biology 2023Quote: ... The supernatant was loaded onto equilibrated stage tips prepared in house by stacking 3×14G styrene divinylbenzene (SDB)-XC layers (Empore Solid Phase Extraction Products, 3M, Eagan, MN, USA) into a 200 μL Eppendorf tip (Granata et al. ...
-
bioRxiv - Animal Behavior and Cognition 2020Quote: ... Pellets were implanted subcutaneously in the female’s back through a small incision (5 mm) that was subsequently sutured with surgical tissue adhesive (Vetbond, 3M). In our study population ...
-
bioRxiv - Molecular Biology 2021Quote: ... A fourth 2.5 ml glass syringe (SGE) was filled with 5% (w/w) 008-fluorosurfactant (RAN Biotechnologies) in HFE-7500 (3M). Next ...
-
bioRxiv - Molecular Biology 2022Quote: ... Peptides were desalted with stage tips using the following procedure: Peptides were reconstituted with 5% acetonitrile/0.1 % formic acid and loaded onto Empore C18 disks (3M) packed into a 200 µl pipette tips pre-equilibrated with LC-MS grade methanol and water containing 0.1% formic acid ...
-
bioRxiv - Immunology 2023Quote: ... Cells were then blocked for an hour (PBS with 5% Normal Goat Serum, 1% BSA, 0.05% Triton-X, 0.3M Glycine). Cells were then incubated with respective antibodies (Supplementary table 3 ...
-
bioRxiv - Biochemistry 2023Quote: ... and subsequently eluted with 5–10 bead volumes of elution buffer (0.1M Tris [pH 8.0], 0.3M NaCl, 250mM Imidazole). Ni-NTA eluates was concentrated using amicon ultra concentrators ...
-
bioRxiv - Neuroscience 2024Quote: ... 5 um/s insertion speed) and secured to the skull using UV-cured dental cement (3M RelyX A2 Universal). The loose end of the silver wire was looped around the ground screw and tightened while visualizing the signal on SpikeGLX (https://billkarsh.github.io/SpikeGLX ...
-
bioRxiv - Immunology 2021Quote: ... The continuous phase comprised 2% (wt/wt) “008 Fluorosurfactant” (RAN Biotechnologies) in Novec HFE7500 fluorinated oil (3M). Aqueous phases I and II were co-flowed and partitioned into droplets ...
-
bioRxiv - Neuroscience 2023Quote: ... the probe was attached to the skull using UV-curing dental cement (RelyX Unicem 2 Automix, 3M), reinforced with dental cement (Super Bond C&B ...
-
bioRxiv - Neuroscience 2024Quote: ... A small well was made around the craniotomy using UV curing cement (3M RelyX Unicem 2 Automix). The dura was removed and a Neuropixels 2.0α or 2.0 ...
-
bioRxiv - Genomics 2019Quote: ... we split the mappable regions in the reference human genome into six categories – 5’UTR (a total length of 9.3M bases), exon (30Mb) ...
-
bioRxiv - Cell Biology 2021Quote: ... washed with water and resuspended in glass bead disruption buffer (20mM Tris-HCl pH 8.0, 10mM MgCl2, 1mM EDTA, 5% Glycerol, 0,3M ammonium sulfate) supplemented with 1mM DTT ...
-
bioRxiv - Molecular Biology 2021Quote: ... The droplets were diluted in a first instance in the re-injection chamber and then spaced with the second stream of oil in a flow-focusing reinjection junction with 5% (w/w) 008-fluorosurfactant (RAN Biotechnologies) in HFE-7500 (3M). The function generator (Thurlby Thandar Instruments ...
-
bioRxiv - Molecular Biology 2021Quote: ... the PDMS-punched holes on the microfluidic device need to be primed with 5% (w/w) RAN 008-fluorosurfactant (RAN biotechnologies) in HFE7500 (3M) as to avoid a trapped air bubble to perturbate the stability of re-injection or the integrity of the emulsions (Figure S1E) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The droplets were spaced in a first instance before re-injection in a flow-focusing junction using 5% (w/w) 008-fluorosurfactant (RAN Biotechnologies) in HFE-7500 (3M). The flow rates used were 200 µl/hr for the droplets ...
-
bioRxiv - Neuroscience 2023Quote: ... The needle remained in place for an additional 5 min to prevent backflow and the incision was closed with Vetbond (3M). Next ...
-
bioRxiv - Physiology 2022Quote: ... All mice then had the deltoid sutured to the trapezius muscle over the acromial arch with 5-0 absorbable Vicryl suture (Ethicon) and the skin incision closed with Vetbond suture glue (3M). The mice were then turned to lie on the right side and the same procedure was repeated for a bilateral treatment ...
-
bioRxiv - Neuroscience 2023Quote: ... after which the incision was closed with 5/0 nylon suture thread (Ethilon Nylon Suture Ethicon) or Tissueglue (3M Vetbond). Mice were kept warm on a heating pad until complete recovery ...
-
Somatostatin interneurons control the timing of developmental desynchronization in cortical networksbioRxiv - Neuroscience 2023Quote: ... a custom-made head plate containing a 5 mm diameter hole was fixed to the skull using veterinary adhesive (Vetbond, 3M). Once the head plate was fixed and stabilized ...
-
bioRxiv - Bioengineering 2024Quote: ... 4.5 mL of 1.5 wt% (w/w) solution of PEG-PFPE2-based surfactant (RAN Biotechnologies, #008-FluoroSurfactant) in fluorinated HFE 7500 oil (3M) was loaded into a 5 mL syringe and injected at 3000 μL/hr ...
-
bioRxiv - Animal Behavior and Cognition 2024Quote: Close the skin with 5-0 Vicryl or PGA suture and seal the wound with wound glue (Vetbond, 3M, Japan) (Fig 1D).
-
bioRxiv - Bioengineering 2024Quote: ... The three syringes and two syringes filled with 10 mL of 5% (w/w) PEG-PFPE surfactant (Ran Biotechnologies) in HFE 7500(3M) HFE 7500 were connected to the microfluidic devices ...
-
bioRxiv - Molecular Biology 2020Quote: ... Gel containing RNA was incubated overnight at 42°C in elution buffer (0.3M NaOAc pH 5.5, 2% SDS). RNA was ethanol precipitated and stored at -20°C until use.