Labshake search
Citations for 3M :
151 - 200 of 359 citations for 5 Pyrimidinecarbonitrile 1 2R 2 3 dihydroxypropyl 1 2 3 4 tetrahydro 3 methyl 2 4 dioxo 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... USA) and Soluprep (2% w/v chlorhexidine and 70% v/v isopropyl alcohol; 3M Canada, London, ON, Canada) were used to prepare the shaved dorsal ventral area ...
-
bioRxiv - Neuroscience 2024Quote: ... The cannula and electrodes were then fixed to the skull using dental cement (3M RelyX Unicem 2 automix), and electrodes were soldered to a 6-channel connector (ENA AG #BPHF2-O6S-E-3.2) ...
-
bioRxiv - Developmental Biology 2024Quote: ... Tetraploid embryos were produced via electrofusion of 2-cell stage embryos isolated from CD1 mice (40V, 30µs with a 250 µm electrode chamber in 0.3M mannitol ...
-
bioRxiv - Biophysics 2021Quote: ... so the total edge length is ℓ = (3M + 4) – D ...
-
bioRxiv - Plant Biology 2023Quote: ... 4 leaves were bound together using micropore tape (3M), abaxial side downwards (Ceciliato et al. ...
-
bioRxiv - Developmental Biology 2020Quote: ... the probes were removed by four washes in increasing dilutions of 2 X SSC (NaCl 0.3M; Sodium citrate 0.03M) at 70°C (25 ...
-
bioRxiv - Neuroscience 2021Quote: ... was kept low by continuously recirculating (~2 L/min) through a vacuum degassing system with a Liqui-Cell G453 2.5 × 8 Membrane Contactor (3M Separation and Purification Sciences Division ...
-
bioRxiv - Neuroscience 2023Quote: ... and a custom designed 3D-printed head post was attached with UV-cured dental cement (3M RelyX Unicem 2). Then ...
-
bioRxiv - Immunology 2023Quote: ... trimer (n=5/group) with 10µg 3M-052 adjuvant in a 2% squalene emulsion (3M-052-SE; provided by AAHI and 3M) at 0 ...
-
bioRxiv - Neuroscience 2020Quote: ... with this number based on power analysis for a mixed-effects analysis at the group-level.45 Pilot-data from two preliminary studies were used for the power calculation (three subjects (2M/1F 28 ± 4 yrs) and 7 subjects (3M/4F 25 ±4 yrs)).43 ...
-
bioRxiv - Microbiology 2020Quote: – 4.75” × 4” transparent film dressing (3M Tegaderm item no 1626W); small drape with adhesive aperture (3M item no 1092)
-
bioRxiv - Molecular Biology 2021Quote: ... Eluted peptides were alkylated with 200 uL of 400 mM iodoacetamide in 25 mM NH4HCO3 at 37°C for 2 hours and loaded onto C18 stage tips made from 3M Empore extraction disks ...
-
bioRxiv - Bioengineering 2019Quote: ... Beads are then placed into a 3 mL syringe with a magnetic stir bar (V&P Scientific) and encapsulated in 2% w/v Ionic Krytox surfactant in HFE 7500 (3M) on an 80 x 80 um drop-making device ...
-
bioRxiv - Molecular Biology 2022Quote: ... The devices were silanized by pipetting a fresh solution of 2% Trichloro(1H,1H,2H,2H-perfluorooctyl)silane in HFE-7500 (3M) into the chips ...
-
Noradrenergic alpha-2A receptor activation suppresses courtship vocalization in male Japanese quail.bioRxiv - Animal Behavior and Cognition 2021Quote: ... The cannula was anchored to the skull with resin cement (RelyX Unicem 2 Clicker; 3M ESPE, St. Paul, MN, USA). The cannula was kept closed at all times by a dummy wire affixed to a threaded cap ...
-
bioRxiv - Immunology 2020Quote: ... Digested peptides were acidified with 10% formic acid (FA) to pH ∼2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Neuroscience 2023Quote: ... FOC-C-1.25-200-7.0-0.37) and stainless steel headplates were affixed to the skull using a combination of light-cured (RelyX Unicem 2, 3M) and self-curing (Superbond ...
-
bioRxiv - Neuroscience 2022Quote: ... Wire ends of all electrodes were soldered to a plug-connector during surgery and secured with dental acrylic (Super-Bond, Sun Medical or Relyx Unicem 2 Automix, 3M; Grip Cement ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Digested peptides were acidified with 10% formic acid to pH ~2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Neuroscience 2023Quote: ... was implanted into the dorsolateral striatum (0.5 mm AP, 2 mm ML, and lowered 0.25 mm) and secured with Vetbond (3M, Maplewood, MN) followed by dental cement (Micron Superior 2 ...
-
bioRxiv - Biochemistry 2023Quote: ... The resulting peptide mixtures were collected using a magnetic rack, acidified with Buffer A* (0.1% trifluoroacetic acid, 2% acetonitrile) and desalted using C18 StageTips (Empore™, 3M) with the addition of Oligo-R3 resin reverse phase material (Thermo ...
-
bioRxiv - Neuroscience 2024Quote: ... were elicited using a twisted nichrome wire stimulating electrode in CA1a or CA1c stratum radiatum (SR) and recorded with a glass pipette electrode (filled with 2M NaCl; R=2-3MΩ) in CA1b SR ...
-
bioRxiv - Neuroscience 2023Quote: ... Brains were mounted onto long coverglass using 2 small strips of double-sided tape (Scotch Brand, 3M, Saint Paul, MN) as spacers and to attach the small coverglass ...
-
bioRxiv - Immunology 2021Quote: ... The gauze was applied to the dorsal skin of Sprr1a−/−;Sprr2a−/− or WT mice and held in place with 2 tegaderm (3M 9505W) and a Band-Aid Sheer Strips (BAND-AID ...
-
bioRxiv - Cell Biology 2023Quote: ... and peptide clean-up was performed using in-house prepared C18 stage tips (3M™ Empore™ – Cat.#14-386-2). Cleaned-up peptides were vacuum-dried in a GeneVac EZ-2and stored at −20°C.
-
bioRxiv - Bioengineering 2023Quote: ... The MXene electrode was prepared by adding 10 µL10 mg/mL MXene water solution on the glass slide with a 2 mm trench made by two parallel scotch tape (3M, USA) and dried on a 50 °C hot plate (VWR ...
-
bioRxiv - Bioengineering 2019Quote: ... The oil flow inlet was similarly connected via a steel pin and Tygon tubing to a pressurized vessel containing 2% w/w ionic krytox (Miller Stephenson 157 FSH) in HFE-7500 (3M Novec 7500); the wash inlet was connected via a steel pin and Tygon tubing to a pressurized vessel containing 50% v/v ethanol for device flushing ...
-
bioRxiv - Genetics 2020Quote: ... Epidermal cell layer imprints were produced from the widest portion of the eighth leaf when the plants were at V9 stage using ethyl-2 cyanoacrylate (Scotch SuperGlue; 3M, Maplewood, MN) applied to the leaves and then pressed onto and recovered on glass microscope slides (Thermo Fisher Scientific ...
-
bioRxiv - Neuroscience 2021Quote: ... Two stainless-steel wires were implanted on each side of the nuchal muscle to record EMG and the entire headmount was then fixed to the skull using RelyX Unicem 2 dental cement (3M, Bracknell, UK). Following surgery animals were provided with thermal support ...
-
bioRxiv - Genomics 2022Quote: ... Then 80 μL, 20 μL, or 8 μL 2% (w/w) fluorosurfactant (Ran BioTechnologies, 008 Fluorosurfacant) in HFE oil (3M, Novec 7500) was added to each well in 96 (Applied Biosystems ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: Retroreflective markers are hand made by covering 4 mm diameter screw on stainless steel piercing ball (Fig. 1a, Suppl. Fig. 1a and 2) with highly retroreflective tape (3M, MN, USA). The tape is first cut into small pieces allowing covering ball with relatively smooth surface (Suppl ...
-
bioRxiv - Neuroscience 2023Quote: ... Glaswarenfabrik Karl Hecht GmbH) and a custom-made holder for head restraining were fixed with dental cement (RelyXTM Unicem 2 Clicker, 3M Deutschland GmbH). Animals received canonical post-surgical care ...
-
bioRxiv - Biophysics 2021Quote: ... so the total length of interest for the sequence is (3M + 4) nt ...
-
bioRxiv - Neuroscience 2020Quote: ... The excitation paths also contain galvo-scanners (Scanlab Dynaxis 3M 14-4) for light-sheet generation and reduction of streaking artifacts due to absorption of the light-sheet ...
-
bioRxiv - Neuroscience 2021Quote: ... The ferrule is secured on both ends of the 3D-printed unit using a self-adhesive resin cement (RelyX Unicem 2, 3M Deutschland, Neuss, Germany). The PI-based ribbon cable is interfaced to a zero insertion force (ZIF ...
-
bioRxiv - Neuroscience 2020Quote: Participants sat in a dark room and listened to auditory stimuli via in-ear tube-phones (ER-2, Etymotic Research, Elk Grove, Illinois) with earmuffs (3M Peltor 30 dBA) to isolate external noise ...
-
bioRxiv - Neuroscience 2019Quote: Participants sat in a dark room and listened to auditory stimuli via in-ear tube-phones (ER-2, Etymotic Research, Elk Grove, Illinois) with earmuffs (3M Peltor 30 dBA) to isolate external noise ...
-
bioRxiv - Neuroscience 2024Quote: ... the ETA-F10 transmitter was placed in a subcutaneous pouch in the animal flank and the insulated wires are run subcutaneously to the implantation site on the skull surface (bilaterally 1.6 mm from the sagittal medial axis and 3.4 mm posterior to bregma) and fixed with cyanoacrylate and dental cement (RelyXTM Unicem 2 Clicker, 3M Deutschland GmbH, Neuss, Germany). For precise positioning and drilling ...
-
bioRxiv - Molecular Biology 2021Quote: ... Gel slices were rotated at 4°C overnight in RNA Elution Buffer (0.3M NaOAc pH 5.2 ...
-
bioRxiv - Neuroscience 2020Quote: ... Skin closure was achieved with nonabsorbable suture (4-0 Prolene) and Vetbond (3M). Mice were allowed 2-3 days to recover ...
-
bioRxiv - Systems Biology 2022Quote: ... Due to the large scale of the LINCS-CMap Level 4 data (>1.3M perturbation instances ...
-
bioRxiv - Neuroscience 2022Quote: ... Wire ends of all electrodes were soldered to a plug-connector during surgery and secured with dental acrylic (Super-Bond, Sun Medical or Relyx Unicem 2 Automix, 3M; Grip Cement, 3M; and Palapress, Heraus Kulzer). Finally ...
-
bioRxiv - Immunology 2023Quote: ... twice with bead washing buffer 2 (100mM NaCl) and resuspension in binding buffer (10mM Tris-HCl pH 7.4, 0.3M NaCl and 0.1% Triton-X-100). Beads were added to the samples and incubated for 20 minutes at room temperature while rotating ...
-
bioRxiv - Cancer Biology 2021Quote: ... 1000 ng and 500 ng of each RNA sample were spotted to a nylon membrane (Hybond N, Dutscher RPN203B) previously soaked in 2X SSPE solution (0.3M NaCl, 20mM sodium phosphate, 2 mM EDTA) and inserted in the dot blot apparatus (SCIE-PLAS) ...
-
bioRxiv - Neuroscience 2020Quote: ... Fixed cells were first permeabilized for 10 minutes in 0.2 % Triton X solution and subsequently incubated for 1 hour at RT in blocking solution (1% BSA, 5% donkey serum, 0.3M glycine and 0.02% Triton X in PBS). Following blocking ...
-
bioRxiv - Molecular Biology 2019Quote: ... Fragmented RNA samples were then mixed with 1/10 volume of Na-acetate (3M, pH 5, Sigma) and 2.5 volumes of EtOH and incubated for 1 hour at −80°C ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein eluates were dialyzed overnight at 4°C in dialysis buffer (0.1M Tris [pH 8.0], 0.3M NaCl) and concentrated using amicon ultra concentrators ...
-
bioRxiv - Immunology 2023Quote: ... Cells were then blocked for an hour (PBS with 5% Normal Goat Serum, 1% BSA, 0.05% Triton-X, 0.3M Glycine). Cells were then incubated with respective antibodies (Supplementary table 3 ...
-
bioRxiv - Biochemistry 2021Quote: ... The crude F1 preparation was loaded onto a 5mL HisTrap HP 5 mL column at 4 °C and washed with 300 mL of 97 % wash buffer (10% MeOH, 10% glycerol, 0.3M NaCl ...
-
bioRxiv - Molecular Biology 2023Quote: ... The oligos were then ethanol precipitated by addition of 4 μL sodium acetate (3M, pH5.2, AMRESCO, Cat.E521-100 ml) and 110 μL 100% ethanol and cooled to −80c for at least 1 h ...