Labshake search
Citations for 3M :
101 - 150 of 155 citations for 6 Fluoroquinoxalin 2 1H one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2024Quote: ... 2X PK buffer (0.2M Tris-HCl [pH 7.5], 25mM EDTA, 0.3M NaCl, 2% [w/v] SDS) was added to stop the reaction ...
-
bioRxiv - Immunology 2021Quote: ... The continuous phase comprised 2% (wt/wt) “008 Fluorosurfactant” (RAN Biotechnologies) in Novec HFE7500 fluorinated oil (3M). Aqueous phases I and II were co-flowed and partitioned into droplets ...
-
bioRxiv - Neuroscience 2023Quote: ... the probe was attached to the skull using UV-curing dental cement (RelyX Unicem 2 Automix, 3M), reinforced with dental cement (Super Bond C&B ...
-
bioRxiv - Neuroscience 2024Quote: ... A small well was made around the craniotomy using UV curing cement (3M RelyX Unicem 2 Automix). The dura was removed and a Neuropixels 2.0α or 2.0 ...
-
bioRxiv - Molecular Biology 2020Quote: ... Gel containing RNA was incubated overnight at 42°C in elution buffer (0.3M NaOAc pH 5.5, 2% SDS). RNA was ethanol precipitated and stored at -20°C until use.
-
bioRxiv - Cell Biology 2021Quote: ... and resuspended in 50mL MURB protein sample buffer (100mM MES pH7.0, 1% SDS, 3M urea, 10% 2-mercaptoethanol) prior to Western analysis.
-
bioRxiv - Biophysics 2021Quote: ... USA) and Soluprep (2% w/v chlorhexidine and 70% v/v isopropyl alcohol; 3M Canada, London, ON, Canada) were used to prepare the shaved dorsal ventral area ...
-
bioRxiv - Neuroscience 2024Quote: ... The cannula and electrodes were then fixed to the skull using dental cement (3M RelyX Unicem 2 automix), and electrodes were soldered to a 6-channel connector (ENA AG #BPHF2-O6S-E-3.2) ...
-
bioRxiv - Developmental Biology 2024Quote: ... Tetraploid embryos were produced via electrofusion of 2-cell stage embryos isolated from CD1 mice (40V, 30µs with a 250 µm electrode chamber in 0.3M mannitol ...
-
bioRxiv - Developmental Biology 2020Quote: ... the probes were removed by four washes in increasing dilutions of 2 X SSC (NaCl 0.3M; Sodium citrate 0.03M) at 70°C (25 ...
-
bioRxiv - Neuroscience 2021Quote: ... was kept low by continuously recirculating (~2 L/min) through a vacuum degassing system with a Liqui-Cell G453 2.5 × 8 Membrane Contactor (3M Separation and Purification Sciences Division ...
-
bioRxiv - Biochemistry 2022Quote: ... and a custom-made flow cell containing 1−2-μm-wide chromium barriers using two-sided tape (3M 665). Single-molecule fluorescent images were collected with an inverted Nikon Ti-E microscope using prism based TIRF microscopy ...
-
bioRxiv - Biochemistry 2020Quote: ... and a custom-made flow cell containing 1-2-μm-wide chromium barriers using two-sided tape (3M 665). Single-molecule fluorescent images were collected with a prism TIRF microscopy-based inverted Nikon Ti-E microscope ...
-
bioRxiv - Neuroscience 2023Quote: ... and a custom designed 3D-printed head post was attached with UV-cured dental cement (3M RelyX Unicem 2). Then ...
-
bioRxiv - Neuroscience 2023Quote: ... A generalized linear model was constructed where 4 weighted trials and a constant would predict the response (i.e., R = β1M-3 + β2M-2 + β3M-1 + β4M0 + β5 ...
-
bioRxiv - Genetics 2023Quote: ... Fixed cells were incubated in blocking buffer (1% BSA, 2% FCS, 0.3M glycine and 0.1% Tween-20 in PBS) at room temperature for 1 hour ...
-
bioRxiv - Immunology 2023Quote: ... trimer (n=5/group) with 10µg 3M-052 adjuvant in a 2% squalene emulsion (3M-052-SE; provided by AAHI and 3M) at 0 ...
-
bioRxiv - Molecular Biology 2021Quote: ... Eluted peptides were alkylated with 200 uL of 400 mM iodoacetamide in 25 mM NH4HCO3 at 37°C for 2 hours and loaded onto C18 stage tips made from 3M Empore extraction disks ...
-
bioRxiv - Bioengineering 2019Quote: ... Beads are then placed into a 3 mL syringe with a magnetic stir bar (V&P Scientific) and encapsulated in 2% w/v Ionic Krytox surfactant in HFE 7500 (3M) on an 80 x 80 um drop-making device ...
-
bioRxiv - Microbiology 2020Quote: ... The bacterial cells were harvested by centrifugation (5000 rpm, 5 min) from four different concentrations of NaCl (e.g. 1 M, 2 M, 3M, & 4M) containing ZM 2216 medium followed by thorough washing and resuspended in a sodium motility buffer (10 mM potassium phosphate ...
-
Noradrenergic alpha-2A receptor activation suppresses courtship vocalization in male Japanese quail.bioRxiv - Animal Behavior and Cognition 2021Quote: ... The cannula was anchored to the skull with resin cement (RelyX Unicem 2 Clicker; 3M ESPE, St. Paul, MN, USA). The cannula was kept closed at all times by a dummy wire affixed to a threaded cap ...
-
bioRxiv - Neuroscience 2022Quote: ... animations were balanced within and between runs (run 1: 2M,3R; sequence M-R-R-M-R; run 2: 3M, 2R ...
-
bioRxiv - Immunology 2020Quote: ... Digested peptides were acidified with 10% formic acid (FA) to pH ∼2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Neuroscience 2023Quote: ... FOC-C-1.25-200-7.0-0.37) and stainless steel headplates were affixed to the skull using a combination of light-cured (RelyX Unicem 2, 3M) and self-curing (Superbond ...
-
bioRxiv - Neuroscience 2022Quote: ... Wire ends of all electrodes were soldered to a plug-connector during surgery and secured with dental acrylic (Super-Bond, Sun Medical or Relyx Unicem 2 Automix, 3M; Grip Cement ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates for all WTs within a cohort (Cohort 1: 2F + 3M; Cohort 2: 3M; Cohort 3: 4F; Cohort 4: 6M), and all KOs within a cohort were pooled (Cohort 1 ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Digested peptides were acidified with 10% formic acid to pH ~2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Neuroscience 2023Quote: ... was implanted into the dorsolateral striatum (0.5 mm AP, 2 mm ML, and lowered 0.25 mm) and secured with Vetbond (3M, Maplewood, MN) followed by dental cement (Micron Superior 2 ...
-
bioRxiv - Biochemistry 2023Quote: ... The resulting peptide mixtures were collected using a magnetic rack, acidified with Buffer A* (0.1% trifluoroacetic acid, 2% acetonitrile) and desalted using C18 StageTips (Empore™, 3M) with the addition of Oligo-R3 resin reverse phase material (Thermo ...
-
bioRxiv - Neuroscience 2024Quote: ... were elicited using a twisted nichrome wire stimulating electrode in CA1a or CA1c stratum radiatum (SR) and recorded with a glass pipette electrode (filled with 2M NaCl; R=2-3MΩ) in CA1b SR ...
-
bioRxiv - Neuroscience 2023Quote: ... Brains were mounted onto long coverglass using 2 small strips of double-sided tape (Scotch Brand, 3M, Saint Paul, MN) as spacers and to attach the small coverglass ...
-
bioRxiv - Immunology 2021Quote: ... The gauze was applied to the dorsal skin of Sprr1a−/−;Sprr2a−/− or WT mice and held in place with 2 tegaderm (3M 9505W) and a Band-Aid Sheer Strips (BAND-AID ...
-
bioRxiv - Bioengineering 2021Quote: ... The membrane strips were then fixed in place by 3 mm wide and 2 cm long double-sided tape strips (3M, USA) placed parallel to the longest side of the HoC ...
-
bioRxiv - Neuroscience 2022Quote: ... and all KOs within a cohort were pooled (Cohort 1: 2F + 3M; Cohort 2: 3M; Cohort 3: 4F; Cohort 4: 6M) to allow for sufficient starting material ...
-
bioRxiv - Cell Biology 2023Quote: ... and peptide clean-up was performed using in-house prepared C18 stage tips (3M™ Empore™ – Cat.#14-386-2). Cleaned-up peptides were vacuum-dried in a GeneVac EZ-2and stored at −20°C.
-
bioRxiv - Bioengineering 2023Quote: ... The MXene electrode was prepared by adding 10 µL10 mg/mL MXene water solution on the glass slide with a 2 mm trench made by two parallel scotch tape (3M, USA) and dried on a 50 °C hot plate (VWR ...
-
bioRxiv - Plant Biology 2019Quote: ... stratified at 4°C for 2 days and sown in 12-well microtiter plates sealed with Micropore tape (3M, St. Paul, MN), each well containing 15 ± 2 seeds and 1 mL of filter-sterilized 1X Murashige and Skoog (MS ...
-
bioRxiv - Bioengineering 2019Quote: ... The oil flow inlet was similarly connected via a steel pin and Tygon tubing to a pressurized vessel containing 2% w/w ionic krytox (Miller Stephenson 157 FSH) in HFE-7500 (3M Novec 7500); the wash inlet was connected via a steel pin and Tygon tubing to a pressurized vessel containing 50% v/v ethanol for device flushing ...
-
bioRxiv - Genetics 2020Quote: ... Epidermal cell layer imprints were produced from the widest portion of the eighth leaf when the plants were at V9 stage using ethyl-2 cyanoacrylate (Scotch SuperGlue; 3M, Maplewood, MN) applied to the leaves and then pressed onto and recovered on glass microscope slides (Thermo Fisher Scientific ...
-
bioRxiv - Neuroscience 2021Quote: ... Two stainless-steel wires were implanted on each side of the nuchal muscle to record EMG and the entire headmount was then fixed to the skull using RelyX Unicem 2 dental cement (3M, Bracknell, UK). Following surgery animals were provided with thermal support ...
-
bioRxiv - Genomics 2022Quote: ... Then 80 μL, 20 μL, or 8 μL 2% (w/w) fluorosurfactant (Ran BioTechnologies, 008 Fluorosurfacant) in HFE oil (3M, Novec 7500) was added to each well in 96 (Applied Biosystems ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: Retroreflective markers are hand made by covering 4 mm diameter screw on stainless steel piercing ball (Fig. 1a, Suppl. Fig. 1a and 2) with highly retroreflective tape (3M, MN, USA). The tape is first cut into small pieces allowing covering ball with relatively smooth surface (Suppl ...
-
bioRxiv - Neuroscience 2023Quote: ... Glaswarenfabrik Karl Hecht GmbH) and a custom-made holder for head restraining were fixed with dental cement (RelyXTM Unicem 2 Clicker, 3M Deutschland GmbH). Animals received canonical post-surgical care ...
-
bioRxiv - Neuroscience 2021Quote: ... The ferrule is secured on both ends of the 3D-printed unit using a self-adhesive resin cement (RelyX Unicem 2, 3M Deutschland, Neuss, Germany). The PI-based ribbon cable is interfaced to a zero insertion force (ZIF ...
-
bioRxiv - Neuroscience 2020Quote: Participants sat in a dark room and listened to auditory stimuli via in-ear tube-phones (ER-2, Etymotic Research, Elk Grove, Illinois) with earmuffs (3M Peltor 30 dBA) to isolate external noise ...
-
bioRxiv - Neuroscience 2019Quote: Participants sat in a dark room and listened to auditory stimuli via in-ear tube-phones (ER-2, Etymotic Research, Elk Grove, Illinois) with earmuffs (3M Peltor 30 dBA) to isolate external noise ...
-
bioRxiv - Biochemistry 2020Quote: ... The exchange was quenched for 2 min at 1°C with an equal volume of quench buffer (3M guanidine HCl, 0.1% formic acid). Proteins were cleaved with pepsin and separated by reverse-phase chromatography ...
-
bioRxiv - Neuroscience 2024Quote: ... the ETA-F10 transmitter was placed in a subcutaneous pouch in the animal flank and the insulated wires are run subcutaneously to the implantation site on the skull surface (bilaterally 1.6 mm from the sagittal medial axis and 3.4 mm posterior to bregma) and fixed with cyanoacrylate and dental cement (RelyXTM Unicem 2 Clicker, 3M Deutschland GmbH, Neuss, Germany). For precise positioning and drilling ...
-
bioRxiv - Pathology 2020Quote: ... and 30 ml of lysis buffer were added (Guanidium thiocyanate 0.8M; ammonium thiocyanate 0,4M; sodium acetate 3M, glycerol 5% and Triton-X 100 2%). The material was smashed with a rolling pin ...
-
bioRxiv - Neuroscience 2022Quote: ... Wire ends of all electrodes were soldered to a plug-connector during surgery and secured with dental acrylic (Super-Bond, Sun Medical or Relyx Unicem 2 Automix, 3M; Grip Cement, 3M; and Palapress, Heraus Kulzer). Finally ...