Labshake search
Citations for BMG Labtech :
51 - 100 of 148 citations for Lysozyme C LYZ Human HEK293 His since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2023Quote: ... the plate was immediately placed in a spectrophotometer at 25°C (Clariostar Plus, BMG Labtech, Mornington, VIC, Aus), and after 15 s of linear agitation ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Growth was monitored at 30 °C with 400 rpm double orbital shaking using a FLUOstar Omega (BMG Labtech) plate reader with measurements conducted every 30 minutes at 600 nm ...
-
bioRxiv - Molecular Biology 2024Quote: ... The NADH emission signal decay was monitored over time at 37°C in a PHERAstar FS (BMG LABTECH), with a 0.03–100 µM NADH dilution series as calibration standard ...
-
bioRxiv - Bioengineering 2021Quote: ... The absorbance of the plasma samples extracted after centrifugation of different devices along with the standard samples made from human plasma was measured with the 96 well plate reader (POLARstar Omega, BMG Labtech).
-
bioRxiv - Genetics 2020Quote: ... Fluorescence signals from amplified samples were measured at <40 °C using the Fluostar Omega Microplate Reader (BMG Labtech, UK). Genotype clustering was done using the KlusterCaller software (LGC Biosearch Technologies ...
-
bioRxiv - Synthetic Biology 2019Quote: ... 96-well plates were incubated overnight at 37°C and 700 rpm in a THERMOstar shaker (BMG LABTECH, Germany). The next morning ...
-
bioRxiv - Cell Biology 2020Quote: ... at 30°C in 384 multi-well plates in a fluorescence plate reader (Fluostar Omega, BMG Labtech, Ortenberg, Germany) (Strunker et al. ...
-
bioRxiv - Plant Biology 2021Quote: All assays were performed in 96 well plates at 25°C in a CLARIOstar plus plate-reader (BMG labtech) in 200 μl reactions with absorbance at 340 nm measured every 60 s until steady states were reached ...
-
bioRxiv - Molecular Biology 2022Quote: ... All experiments were performed on a CLARIOstar Plus plate reader at 37°C with 1 mM ATP (BMG Labtech).
-
bioRxiv - Biochemistry 2022Quote: ... Fluorescence intensity was recorded every 10 s for 60 min at 25°C using a Clariostar PLUS (BMG LabTech) plate reader (excitation wavelength ...
-
bioRxiv - Molecular Biology 2024Quote: ... OD600nm was measured every 5 min over 18 h at 37 °C using a SPECTROstar Omega spectrophotometer (BMG Labtech) with shaking before every measurement ...
-
bioRxiv - Neuroscience 2020Quote: ... incubated at 37°C for 15 min with assay substrate and fluorescence analysed using a CLARIOstar spectrophotometer (BMG Labtech, Germany) with excitation and emission filters set at 540nm and 590nm respectively.
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... The GLP-1R-induced BRET signal between Gαs and Gγ was measured at 30°C using a PHERAstar (BMG LabTech). Baseline BRET measurements were taken for 2 min before addition of vehicle or ligand ...
-
bioRxiv - Cell Biology 2020Quote: ... 2 μl of 20 mM Iodoacetamide was added per well and incubated at 32 °C and reactions monitored at λAbs=420 nm for 30 min in a FLUOstar OPTIMA (v2.20R2, BMG Labtech) plate reader and compared to iodoacetamide null controls ...
-
bioRxiv - Microbiology 2021Quote: ... 200 μL of the culture at OD600 = 0.15 was grown aerobically at 37°C with intermittent shaking in a microplate reader (FLUOstar Omega, BMG LABTECH).
-
bioRxiv - Biochemistry 2021Quote: ... The GLP-1R-induced BRET signal between Gαs and Gγ was measured at 30°C using a PHERAstar (BMG LabTech). Baseline BRET measurements were taken for 2 min before addition of vehicle or ligand ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... Each well contained 120 μl stripe LB medium containing 0.4% (w/v) glucose and antibiotics and plates were cultured overnight at 37°C and 700 rpm (THERMOstar, BMG Labtech). From each overnight culture 5 μl were used to inoculate a 120 μl selective LB medium pre-culture ...
-
bioRxiv - Plant Biology 2023Quote: ... in a final volume of 200 μL and changes in absorbance was measured at 30 °C (BMG Labtech Spectrostar Nano). The Beer-Lambert equation (A=ɛcl ...
-
bioRxiv - Immunology 2023Quote: ... The kinetic assay was performed by incubating the plate at 37 °C in a CLARIOstar Plus plate reader (BMG Labtech) for the duration of the study ...
-
bioRxiv - Neuroscience 2020Quote: ... Aβ40 solution aliquots were incubated at 37 °C in 96-well plates under constant double-orbital shaking in a FLUOStar Omega plate reader (BMG Labtech). The formation of amyloid fibrils was monitored by the Thioflavin T fluorescence ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence polarization decay was measured with a cycle time of 30s for 60 cycles at 30 °C using plate reader (Pherarastar, BMG Labtech). Normalized parallel and perpendicular fluorescence intensities were used for further calculations ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence anisotropy of the prepared samples was measured after 15 min at 25°C using a plate reader (CLARIOstar, BMG Labtech, Excitation ...
-
bioRxiv - Biochemistry 2020Quote: ... Fluorescence anisotropy of the prepared samples was measured at 25°C for 2 h using a plate reader (CLARIOstar, BMG Labtech, Excitation ...
-
bioRxiv - Microbiology 2021Quote: ... The plates were returned to 37°C/5% CO2 for 72 h and GFP signal imaged on a Mirrorball plate reader (BMG Labtech). The fluorescence signals of the test wells were normalized to percent activation relative to the average of the positive control wells on each plate by the formula:
-
bioRxiv - Cancer Biology 2021Quote: ... ATX activity was measured by HVA fluorescence at λex/λem = 320/460 nm every 30 s for at least 160 min at 37°C with a Pherastar plate reader (BMG Labtech). Since ATX activity in vitro presents a ∼15-min lag phase ...
-
bioRxiv - Microbiology 2020Quote: ... and the optical density (OD436) was measured in a microtiter plate reader with shaking at 37°C (FLUOstar OMEGA, BMG LABTECH) every 5 minutes for about 24 hours ...
-
bioRxiv - Microbiology 2021Quote: ... The plate was then incubated at 30 °C with shaking every 30 min before each measurement in a SPECTROstar Omega plate reader (BMG LABTECH).
-
bioRxiv - Microbiology 2021Quote: ... was added and incubated for 4 hours at 37°C before measuring well fluorescence intensity at 590 nm using a FLUOstar Omega plate reader (BMG Labtech).
-
bioRxiv - Biophysics 2021Quote: ... The samples were then applied to a 384-well plate and fluorescence spectra were recorded at 25 C on a CLARIOstar Microplate Reader (BMG LABTECH). Samples were excited at 525 nm and emitted light was recorded between 560 - 700 nm in 0.5 nm increments ...
-
bioRxiv - Biophysics 2022Quote: ... Assays were initiated by placing the 96-well plate at 37 °C under quiescent conditions in a plate reader (Fluostar Omega or Fluostar Optima, BMG Labtech). The ThT fluorescence was measured through the bottom of the plate with a 440 nm excitation filter and a 480 nm emission filter.
-
bioRxiv - Microbiology 2020Quote: ... The plate was then incubated at 37°C (shaking at 400 rpm, double orbital) in a plate reader (BMG Labtech Omega) for 24 h ...
-
bioRxiv - Microbiology 2022Quote: ... and 10 µl of each dilution were added to 190 µl of cell suspension followed by incubation in flat-bottom 96 wells at 30°C using a FLUOstar OMEGA plate reader (BMG LABTECH). To follow phage induced bacterial lysis over time ...
-
bioRxiv - Microbiology 2022Quote: ... Turbidity was monitored in 2 min intervals at 30 °C in flat-bottom 96 well plates using a FLUOstar OMEGA plate reader (BMG LABTECH). Plates were agitated before each measurement ...
-
bioRxiv - Microbiology 2022Quote: ... and absorbance (600 nm) were measured every 15 min for 15 h at 34 °C on a CLARIOstar microplate reader (BMG Labtech). IC50 values were calculated using PRISM software ...
-
bioRxiv - Cell Biology 2022Quote: ... Assays were setup in 96-well black flat bottom plates (Costar) on ice and LUV permeabilization was monitored at 37 °C for 90 min in a CLARIOSTAR microplate reader (BMG Labtech) at excitation and emission wavelengths of 360 nm and 530 nm ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... The plate was incubated at 37 °C for 4 h and the light scattering was measured in a Nephelostar Plus reader (BMG LABTECH). The data was fitted to a segmented linear regression for measuring the compound solubility.
-
bioRxiv - Immunology 2019Quote: ... The samples were excited at 340 nm and the emission of fluorescence was measured at 460nm at 37°C every min for 1hr in a PHERAstar FS microplate reader (BMG LABTECH). NADase activity was calculated as the slope of the linear portion of the fluorescence-time curve ...
-
bioRxiv - Microbiology 2020Quote: ... The plates were incubated for an additional 5 h at 37°C before fluorescence intensity measurements were taken using a FLUOstar OPTIMA microplate reader (BMG Labtech) using excitation and emission wavelengths of 485 nm and 508 nm ...
-
bioRxiv - Biochemistry 2020Quote: ... Caspase 3-like activity was measured fluorometrically by the addition of 50 µM acetyl-Asp-Glu-Val-Asp-7-amino-4-methylcoumarin (Ac-DEVD-AMC) at 37 °C in 96-well plates using a ClarioSTAR microplate reader (BMG LABTECH). The production of AMC (λEM = 390 nm ...
-
bioRxiv - Microbiology 2021Quote: Growth curves were implemented in 96-well plates with 200 μl culture per well and incubated at 37°C with shaking (200 rpm) in a microplate reader (POLARstar Omega, BMG labtech). As inoculum ...
-
bioRxiv - Microbiology 2019Quote: ... The OD600 readings were determined after incubating the 96-well plates for 24 h at 37°C with shaking at 500 rpm in a plate incubator (Thermostar, BMG Labtech). The MIC value refers to the antibiotic concentration at which bacterial growth was inhibited by >90%.
-
bioRxiv - Microbiology 2019Quote: ... Bacteria were grown at 37°C for 20 h with cyclic shaking at 700 rpm in a FLUOstar Omega microplate reader (BMG Labtech). Growth was assessed over 20 h by measuring the OD600 at 20 min increments ...
-
bioRxiv - Biophysics 2020Quote: ... to prevent evaporation and then placed at 37 °C under quiescent conditions in a plate reader (CLARIOstar; BMG Labtech, Ortenberg, Germany). ThT fluorescence was measured through the bottom of the plate using 440-nm and 480-nm excitation and emission filters ...
-
bioRxiv - Microbiology 2021Quote: ... The ability of the bacteria to survive the arachidonic acid was determined by quantifying bacterial growth (OD600nm) following 24h at 37°C using a CLARIOstar plate reader (BMG Labtech).
-
bioRxiv - Microbiology 2020Quote: ... The 96-well plates were incubated at 37°C with shaking at 500 rpm in a plate incubator (Thermostar, BMG Labtech) and OD600 determined after 24 hours of incubation ...
-
bioRxiv - Biophysics 2020Quote: ... at 37°C with double orbital rotation (400 rpm) in a 96-well plate in a FLUOstar OPTIMA plate reader (BMG Labtech). The aggregation of Aβ42 was followed by measuring the fluorescence increase of 20 mM ThT in one similar aliquot ...
-
bioRxiv - Biochemistry 2020Quote: ... 0.5 mM ATP and 0.5 mM luciferin was added and luminescence recorded for 30 min at 30°C in a FluoStar Omega Microplate Reader (BMG Labtech). All experiments were executed in triplicate ...
-
bioRxiv - Microbiology 2022Quote: ... Plates were incubated for another 45 min at 27 °C before fluorescence was measured on a PHERAstar microplate reader (BMG Labtech) using 540 nm exication and 590 nm emission wavelength.
-
bioRxiv - Neuroscience 2022Quote: ... Lysates (or lysis buffer alone as a background control) were incubated for 2 h at 37 °C before reading on a fluorescence plate reader (BMG LABTECH) at excitation 360 nm ...
-
bioRxiv - Microbiology 2022Quote: ... Plates were incubated overnight at 37⍰°C for up to 20⍰h and absorbance (OD600) was read using a Fluostar Optima (BMG Labtech) plate reader.