Labshake search
Citations for Eppendorf :
351 - 400 of 400 citations for DIRAS Family GTP Binding RAS Like 1 DIRAS1 Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... were diluted in BME (1:10) and locally injected into the outer SVZ by using a FemtoJet® 4i microinjector (Eppendorf). After 72 h ...
-
bioRxiv - Microbiology 2022Quote: A lysate sample (1 ml) with 108 PFU/ml was centrifuged at 20,000 g (centrifuge 5430R, rotor FA-45-24-11HS; Eppendorf, Hamburg Germany) for 2 h at room temperature ...
-
bioRxiv - Bioengineering 2020Quote: ... and microbubbles were isolated by 4 centrifugation wash cycles at 40 relative centrifugation force for 1 min (Eppendorf 5804, Hamburg, Germany), where the infranatant was discarded and the microbubble concentrate was saved and resuspended.
-
bioRxiv - Molecular Biology 2021Quote: ... the injection needle was loaded with the injection mixture calibrated using a microscale graticule to deliver 1-1.7nl per injection and each egg was injected (FemtoJet 4x, Eppendorf, Hamburg, Germany), once ...
-
bioRxiv - Immunology 2020Quote: ... 1 ml of MTBE was added and the solution was incubated for 1 hour at room temperature with continuous shaking at 600 rpm (Eppendorf, MixMate). Next ...
-
bioRxiv - Synthetic Biology 2023Quote: ... then 1 mL aliquots were placed in triplicate in plastic-bottomed black 24-well plates (Eppendorf Cell Imaging Plates ref. 0030741005), and the plates were placed onto a custom made light plate apparatus (LPA)27 to control blue light illumination in each well (λ = 460 nm ...
-
bioRxiv - Neuroscience 2023Quote: ... was added to lyophilized Aβ1-42 peptide to a final concentration of 1 mM and centrifuged in a speed vac (Eppendorf, Hamburg, Germany). The peptide pellet was re suspended in DMSO at a 5 mM concentration and sonicated in a 37⁰C water bath for 10 min ...
-
bioRxiv - Microbiology 2023Quote: ... by adding 50 μL of a 2 mg/mL stock solution and 25 μL of 50 mM CaCl2 and incubating for 1 h at 37 °C with agitation at 300 rpm in a Thermomixer comfort (Eppendorf, Germany). The cell wall material was pelleted and washed two times with 2 mL of ultrapure water (21000 g ...
-
bioRxiv - Biochemistry 2023Quote: ... The cellulase-LPMO synergy was assessed by performing reactions with crystalline Avicel (1 % w/v) in 50 mM sodium phosphate buffer (pH 6.0) using a thermomixer (Eppendorf, Hamburg, Germany) incubated at 30 °C with horizontal agitation (1000 rpm) ...
-
bioRxiv - Bioengineering 2023Quote: ... Cells were stained for 1 hour at a temperature of 4°C with shaking at 600 rpm in a Thermomixer comfort (Eppendorf, Germany). Stained cells were washed with ice cold FACS buffer twice before resuspension in FACS buffer for analysis ...
-
bioRxiv - Cell Biology 2023Quote: ... or at 37°C/5% CO2/1% O2 in a nitrogen-controlled hypoxic incubator (New Brunswick Galaxy 170R, Eppendorf, Hamburg, Germany). Prior to media changes ...
-
bioRxiv - Biochemistry 2023Quote: ... was adjusted to 50 ng/μL with 50% ACN containing 0.1% TFA and dispensed in 10 μL each into normal tubes (1.5-mL safe-lock tube, CAT# 0030120086, Eppendorf, Hamburg; Germany), normal polypropylene (PP ...
-
Multidrug resistance plasmids commonly reprogramme expression of metabolic genes in Escherichia colibioRxiv - Microbiology 2023Quote: ... A 1 ml sample of overnight suspension was centrifuged for five minutes at 8,000 rpm (Eppendorf MiniSpin F-45-12-11), the pellet resuspended in 1 ml PBS ...
-
bioRxiv - Microbiology 2024Quote: ... The crude EV fractions were prepared by ultracentrifugation (45,000 rpm, 1 h, 4°C; S50A rotor, Himac Ultracentrifuge CS100GXII; Eppendorf Himac Technologies) of the thus prepared supernatants.
-
bioRxiv - Microbiology 2019Quote: ... and extension at 72°C for 1 min followed by final extension was conducted at 72°C for 5 min using a PCR minicycler (Eppendorf Ltd., Germany). After amplification ...
-
bioRxiv - Immunology 2022Quote: ... 20 μL of mAb solution was added to the cells in the filter wells and the cells were incubated for 1 h at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). After the incubation ...
-
bioRxiv - Biochemistry 2021Quote: ... all samples were adjusted to the same volume and concentration (ca. 1 mg/mL) and transferred to protein low-bind microcentrifuge tubes (Eppendorf, Hamburg, Germany). To precipitate the proteins ...
-
bioRxiv - Biochemistry 2020Quote: ... Peptides were eluted with 60 μl of 80% acetonitrile/1% ammonia and dried at 60°C using a SpeedVac centrifuge (Eppendorf, Concentrator plus). Dried peptides were dissolved and sonicated in 5% acetonitrile/0.1% TFA ...
-
bioRxiv - Microbiology 2021Quote: ... Bacillus cereus group isolates’ inocula were prepared from overnight cultures (see “Bacterial cultures” section) by adjusting their concentration to 1-2 × 108 CFU/ml using a spectrophotometer (Eppendorf BioPhotometer 6131). A previously established OD-CFU standard curve was used to estimate the CFU/ml based on the OD reading ...
-
bioRxiv - Systems Biology 2022Quote: ... Peptides were eluted with 60 μl of elution buffer (80% acetonitrile/1% ammonia) and dried at 60°C using a SpeedVac centrifuge (Eppendorf, Concentrator plus). Dried peptides were redissolved and sonicated in 5% acetonitrile/0.1% TFA ...
-
bioRxiv - Biophysics 2022Quote: ... The cultures were then induced with IPTG by adding 10 uL of 100 mM (final concentration approximately 1 mM) per well with an electric repeater pipette (Eppendorf, E4x series), and grown for another 4 h at 37 °C ...
-
bioRxiv - Developmental Biology 2021Quote: ... Young adult hermaphrodites were injected in the germline using an inverted micro-injection setup (Eppendorf FemtoJet 4x mounted on a Zeiss Axio Observer A.1 equipped with an Eppendorf Transferman 4r). Candidate edited progeny were selected on plates containing 250 ng/ml of hygromycin and correct genome editing was confirmed by Sanger sequencing (Macrogen Europe ...
-
bioRxiv - Developmental Biology 2020Quote: ... Microinjection of young adult hermaphrodite germlines was done using an inverted microinjection setup (Eppendorf FemtoJet 4x mounted on a Zeiss Axio Observer A.1 equipped with an Eppendorf Transferman 4r). In cases where the sgRNA target site was not disrupted by sequence integration ...
-
bioRxiv - Microbiology 2022Quote: ... 4.6×106 LMBs or NMBs were added and samples incubated at 37 °C for 1 hour on a thermomixer (60 rpm; Eppendorf, Hamburg, Germany). After this step ...
-
bioRxiv - Biochemistry 2019Quote: ... 0.1% formic and mixed with the now washed Oligo R3 Resin and allowed to shake on a plate shaker (Eppendorf, Thermomixer Comfort) for 5 minutes at 800 RPM ...
-
bioRxiv - Developmental Biology 2021Quote: ... Young adult hermaphrodites were injected in the germline using an inverted micro-injection setup (Eppendorf FemtoJet 4x mounted on a Zeiss Axio Observer A.1 equipped with an Eppendorf Transferman 4r). Candidate edited progeny were selected on plates containing 250 ng/μl of hygromycin (Dickinson et al. ...
-
bioRxiv - Cell Biology 2020Quote: ... Young adult hermaphrodites were injected in the germline using an inverted micro-injection setup (Eppendorf FemtoJet 4x mounted on a Zeiss Axio Observer A.1 equipped with an Eppendorf Transferman 4r). Candidate edited progeny were selected on plates containing 250 ng/μl of hygromycin (Dickinson et al. ...
-
bioRxiv - Biochemistry 2022Quote: ... samples were prepared in 96 well microtiter plates by adding 12.5 μL reaction supernatant to 50 μL acetonitrile with 1% v/v trifluoroacetic acid (TFA) followed by centrifugation (2,204 g, 30 min; A-2-DWP rotor, Eppendorf AG, Hamburg, Germany) and transferring of 50 μL centrifugation supernatant into 150 μL MilliQ H2O ...
-
bioRxiv - Neuroscience 2023Quote: ... The plasmid injection solution was injected into Hydra vulgaris AEP 1-cell stage embryos using an Eppendorf FemtoJet 4x and Eppendorf InjectMan NI 2 microinjector (Eppendorf; Hamburg, Germany) under a Leica M165 C stereo microscope (Leica Microscopes ...
-
bioRxiv - Microbiology 2022Quote: ... Bacterial mixtures were diluted 1:1000 into LB with or without 1% DMSO (v/v) and incubated standing at 37°C in 5% CO2 at atmospheric oxygen (normoxic; Eppendorf CellXpert incubator), 1% oxygen (hypoxic ...
-
bioRxiv - Microbiology 2023Quote: Liquid samples in 1 ml were collected and centrifuged for 20 min at 21 130 × g at 4°C (Centrifuge 5424 R; Eppendorf, Hamburg, Germany). The supernatants were used for chemical analyses by applying external standards for calibration and quality control ...
-
bioRxiv - Neuroscience 2023Quote: ... A total of 1800 µl of solution from both tubes (batch 1) were transferred to a 2 ml Eppendorf and vortexed (Eppendorf Thermomixer C) for 15 minutes at 2000 rpm (4 °C) ...
-
bioRxiv - Synthetic Biology 2023Quote: ... 100 ng corresponding pEcgRNA-N20 and 400 ng donor DNA were co-electrotransformed into 100 uL competent cells in 1 mm gap electroporation cuvette by applying 2.5 kV pulse in electroporator (Eppendorf™ Eporator™). After adding 900 uL of cold SOC medium ...
-
bioRxiv - Genetics 2024Quote: ... placed in an injection arena (9 cm-diameter Petri dish containing a layer of 1% agarose) and injected with ∼60 ng of Pmtra-2 or EGFP dsRNA (negative control) using a FemtoJet microinjector (Eppendorf, Hamburg, Germany). Injectees were maintained in a two-ounce plastic cup with corn leaves until they became adults ...
-
bioRxiv - Systems Biology 2024Quote: ... are then added to the sample and incubated at 56°C for 1 hour at 1000 RPM (ThermoMixer C, Eppendorf, Hamburg, Germany). 37µl of 500mM chloroacetamide (50mM final concentration ...
-
bioRxiv - Biochemistry 2024Quote: ... Constructs were expressed in 1 L LB/kanamycin medium and grown at 37 °C while shaking at 180 rpm (Eppendorf Innova S44i) until an OD600 of 0.6 was reached ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Biochemistry 2021Quote: ... Production of CjLPMO10AFL was achieved by fed-batch fermentation of the expression strain in a 1-liter fermenter (DASGIP® benchtop bioreactors for cell culture; Eppendorf, Hamburg, Germany), essentially as described previously (44) ...
-
bioRxiv - Microbiology 2020Quote: ... printed arrays were moved to individual 1 mL centrifuge tubes containing 200 μL of M9 medium and melted at 55°C for 1 min in a thermomixer (Eppendorf ThermoMixer® C) shaking at 1000 rpm ...
-
bioRxiv - Microbiology 2022Quote: ... Two-microliter aliquots of resuspended lipids were diluted 1:10 in 10 mM ammonium acetate in methanol in 96-well plates (Eppendorf twin tec 96) prior to measurement ...
-
bioRxiv - Microbiology 2022Quote: ... Two μl aliquots of the resuspended lipids were diluted 1:10 in 10 mM ammonium acetate in methanol in 96-well plates (Eppendorf twin tec 96) prior to measurement ...
-
bioRxiv - Cancer Biology 2023Quote: ... at 4°C for 1 hour and centrifuged at 4°C at 14200 rpm for 50 min using a refrigerated table-top centrifuge (Eppendorf Centrifuge, Hamburg, Germany). The cleared lysates were loaded on wells of 96-well single-use filter micro-plates with 3 µm glass fibers and 25 µm polyethylene membranes (Agilent ...
-
bioRxiv - Biochemistry 2023Quote: ... The samples were then digested for 4 h at 37°C (1000 x rpm for 1 h, then 650 x rpm, Eppendorf ThermoMixer®C). Samples were then diluted 1:1 with milliQ water ...
-
bioRxiv - Genomics 2020Quote: The ST slide with the tissue section was warmed to 37°C for 1 minute on a thermal incubator (Eppendorf Thermomixer Option C, Germany). The tissue was then covered with 4% formaldehyde (Sigma-Aldrich ...
-
bioRxiv - Cell Biology 2023Quote: ... Protein pellets were dissolved in 0.1% RapiGest and 500 mmol/L TEAB and then incubated at 850 rpm for 45 min at 37 °C (Eppendorf Comfort Thermomixer, Eppendorf, USA). Proteins were digested by trypsin (Trypsin Gold ...
-
bioRxiv - Cell Biology 2023Quote: ... SCs were proliferated in SFGM on Cytodex-1 microcarriers (Cytiva) in a 50c BioBLU single use vessel (Eppendorf; 37 °C, pH 7.2, 25 rpm) with a working volume of 40 L ...
-
bioRxiv - Bioengineering 2023Quote: ... Fluorescence measurements were taken at day 1 (when the PCL-TMA scaffolds were removed from the Eppendorf tube after 24 hours of cell seeding) and on day 14 (each PCL-TMA scaffold was moved to a new 24 well plate to ensure only the cells adhered to the scaffold were quantified) ...
-
bioRxiv - Neuroscience 2024Quote: ... The tissue was rinsed with fresh HBSS and digested with 20 U/ml papain (#LS003126, Worthington Biochemical) (500 μl per one hippocampi Eppendorf, 1 ml for cortex) for 30 minutes on thermomixer at 37°C with gentle shaking (350 rpm) ...
-
bioRxiv - Biophysics 2021Quote: ... Lipid extracts were resuspended in 60 μl 10mM ammonium acetate in methanol and diluted 1:4 in 96-well plates (Eppendorf twin.tec® 96; Sigma-Aldrich) prior to measurement of PC species ...
-
bioRxiv - Bioengineering 2023Quote: ... Fluorescence measurements were taken at day 1 (when the PCL-TMA/PCL-TMA900 scaffolds were removed from the Eppendorf tube after 24 hours of cell seeding) and on day 14 (each scaffold was moved to a new 24 well plate to ensure only adherent cells were quantified) ...