Labshake search
Citations for Eppendorf :
701 - 750 of 840 citations for 7H Diimidazo 1 5 a 1 5 4 de quinoxaline 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2019Quote: ... for 5 minutes at 3,500 RPM (2,465 x g, Eppendorf 5810R v3.3 centrifuge with A-4-62 rotor, Eppendorf, Hamburg, Germany) with an additional 30-minute incubation on the bench ...
-
bioRxiv - Bioengineering 2021Quote: ... MNPs were injected into cells using a micro manipulation system (Inject-Man 4 and FemtoJet 4i, Eppendorf, Hamburg, Germany) with microinjection capillaries (Femtotip II ...
-
bioRxiv - Cancer Biology 2020Quote: ... −3.6 D/V: −1.6 with 4 µl of transfection mix using a pulled glass capillary and a FemtoJet microinjector (Eppendorf). In utero electroporation was performed at day E15.5 ...
-
bioRxiv - Synthetic Biology 2021Quote: ... Cells were then pelleted by centrifugation at 3900 rcf for 15 min (Eppendorf S5810R with S-4-104 rotor) and stored at -80 °C.
-
bioRxiv - Microbiology 2019Quote: ... USA) followed by centrifugation at 7000 × g at 4° C for 10 minutes (Centrifuge 5430 R, Eppendorf AG, Germany). The resulting supernatant was used as the WCP sample and stored at -20° C until used.
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant from 300 × g was transferred to new 15mL tube and then centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant from 2,000 × g was transferred to 30mL conical tube and then centrifuged at 10,000 × g for 10 min at 4°C (# Avanti J-E JA25-50 Beckman Coulter) ...
-
bioRxiv - Bioengineering 2021Quote: ... The tube was centrifuged for 10 min at 1,000x rpm at 4°C with minimum acceleration and deceleration (5810R Centrifuge, Eppendorf). Any fluid expelled was collected into 1.5 mL tubes ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf). The supernatant filtered through a 0.22-μm polyethersulfone membrane filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a new 15-mL polypropylene tube and centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf) ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were then centrifuged at 13,000×g for 20 min at 4 °C using an F2402 rotor in a GS15R table-top centrifuge (Eppendorf). Pellets were air dried ...
-
bioRxiv - Cell Biology 2022Quote: ... 4 mM MgCl2) was carefully injected into an individual cardiomoycyte by a glass pipette via the CellTram injector (Eppendorf). After 5 minutes dye spreading to neighboring cardiomyocytes was visualized by Zeiss Axio Examiner A1 using a 40× objective and images were taken using TILL Photonics LA software (version 2.3.0.18 ...
-
bioRxiv - Plant Biology 2023Quote: ... samples (stored for 4-12 weeks) were thawed at room temperature for 15 mins and centrifuged (Eppendorf Centrifuge 5417C) at 11,000 rpm for 14 mins to extract bulk leaf sap ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were centrifuged at 4°C at 15,000 RPM for 15 minutes in a table top centrifuge (Eppendorf 5424R). The supernatant’s protein concentration was measured using Bradford’s assay (Bio-Rad #5000202) ...
-
bioRxiv - Microbiology 2023Quote: ... harvested by centrifugation (3,500 × g for 20 min at 4°C, Centrifuge 5702 R, Eppendorf North America, Framingham, MA), and suspended in an equivalent amount of 1 × PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Bioengineering 2023Quote: All centrifugation experiments were conducted in an Eppendorf 5702R centrifuge with a swing bucket rotor (Eppendorf, A-4-38) at 20°C ...
-
bioRxiv - Microbiology 2023Quote: ... The parasite solution was pelleted at 1,200 g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... The incubated sample was centrifuged at 20,800 g for 15 min at 4 °C (Rotor F45-30-11, Eppendorf), and the resulting supernatant was analyzed by immunoblotting using various antibodies ...
-
bioRxiv - Cell Biology 2023Quote: ... fractions numbered from 9 to 22 were processed by centrifugation (20,800 g for 30 min at 4 °C, Rotor F45-30-11, Eppendorf), and the resulting pellet was further resuspended in 160 μL of alkaline carbonate buffer (100 mM Na2CO3 ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Genomics 2020Quote: The ST slide with the tissue section was warmed to 37°C for 1 minute on a thermal incubator (Eppendorf Thermomixer Option C, Germany). The tissue was then covered with 4% formaldehyde (Sigma-Aldrich ...
-
bioRxiv - Cell Biology 2023Quote: ... Protein pellets were dissolved in 0.1% RapiGest and 500 mmol/L TEAB and then incubated at 850 rpm for 45 min at 37 °C (Eppendorf Comfort Thermomixer, Eppendorf, USA). Proteins were digested by trypsin (Trypsin Gold ...
-
bioRxiv - Cell Biology 2023Quote: ... SCs were proliferated in SFGM on Cytodex-1 microcarriers (Cytiva) in a 50c BioBLU single use vessel (Eppendorf; 37 °C, pH 7.2, 25 rpm) with a working volume of 40 L ...
-
bioRxiv - Bioengineering 2023Quote: ... Fluorescence measurements were taken at day 1 (when the PCL-TMA scaffolds were removed from the Eppendorf tube after 24 hours of cell seeding) and on day 14 (each PCL-TMA scaffold was moved to a new 24 well plate to ensure only the cells adhered to the scaffold were quantified) ...
-
bioRxiv - Neuroscience 2024Quote: ... The tissue was rinsed with fresh HBSS and digested with 20 U/ml papain (#LS003126, Worthington Biochemical) (500 μl per one hippocampi Eppendorf, 1 ml for cortex) for 30 minutes on thermomixer at 37°C with gentle shaking (350 rpm) ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Microbiology 2019Quote: ... the vials were removed from the incubator and beads were spun down at 1200 rpm using a swinging-bucket A-4-81 rotor (Eppendorf). An aliquot of 10 µl of bead suspension was carefully sampled from the bottom of the vials ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... Cell harvest was performed outside the anaerobic chamber at 3700 rpm for 12 min (Centrifuge 5920R, S-4×1000, Eppendorf) at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Neuroscience 2019Quote: ... The lysate was cleared from the insoluble fraction by centrifugation for 15 min at 10,000 rpm (11,292 x g) at 4 °C (Eppendorf 5427 R). The supernatant was retrieved and the procedure repeated until no pellet was visible after centrifugation ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Microbiology 2019Quote: ... PMNs were sedimented for 10 min with 1000 × g at 4°C on 45° fixed-angle rotor FA-45-30-11 (Eppendorf). The supernatant was filtered by gravity through sterile PVDF 5.0 µm Millex syringe filters (Merck-Millipore) ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plasma was defrosted and then centrifuged at 2000 rpm (805 × g) for 4 min in a 5810 R centrifuge (Eppendorf) to remove possible particulate matter ...
-
bioRxiv - Immunology 2020Quote: ... The cultures were placed on ice for 10 minutes to slow growth then centrifuged at 3,000 × g for 10 minutes at 4°C (Eppendorf 5810R). The supernatants were discarded and the pellets were resuspended in fresh RPMI 10mM glucose until a McFarland of 5.0 (∼109 CFU/mL ...
-
bioRxiv - Systems Biology 2020Quote: ... A fixed volume of 100 μL cells was used to inoculate 50 mL preculture M9 +40 mM MOPS media with 4 g/L glucose which was grown overnight in a shake flask at 200 rpm in a 37°C (Eppendorf) incubator ...
-
bioRxiv - Neuroscience 2019Quote: ... Excised gel slices were incubated with 50% acetonitrile/50mM ammonium bicarbonate for 2 h at room temperature or 4°C overnight with gentle shaking at 600 rpm in a Thermomixer (Eppendorf), before being incubated in 100% acetonitrile for 15 min at room temperature ...
-
bioRxiv - Biophysics 2019Quote: ... The His-SUMO solubility tag was cleaved using His-tagged SUMO protease (from RGO) by incubating at 4°C overnight while gently rocking in protein lobind tubes (Eppendorf). The flow through of the second affinity step was collected and concentrated prior to loading onto a Superdex S200 (26/60 ...