Labshake search
Citations for Eppendorf :
1 - 50 of 937 citations for 7 methoxy 4 piperidin 1 ium 1 ylmethyl 3 4 dihydro 2H 1 benzoxepin 5 one chloride since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Physiology 2023Quote: ... for 1 h at 4 □ on a ThermoMixer C (Eppendorf), 350 µl of water and 250 µl of chloroform were added to the mixture to induce phase separation ...
-
bioRxiv - Systems Biology 2023Quote: ... and incubated on ice for 1 min before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Bioengineering 2019Quote: For extract preparation each 4 mL of cell cultures from tp 48h of HDC run 1 were spun down for 10 min at 4000 g and 4 °C (Centrifuge 5804R, Rotor A-4-44, Eppendorf). Pellets were resuspended in fresh 1 mL ‘thylakoid buffer’ (50 mM HEPES-NaOH ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 7000 RPM for 7 min at 4 °C (Eppendorf model 5804R). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Biochemistry 2022Quote: ... 0.01% Tween 20) for 1 h at 4 °C and 1200 rpm in a thermomixer (Eppendorf). Unbound protein was removed by washing 2x with high salt buffer (50 mM HEPES pH 7.5 ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Biochemistry 2020Quote: ... The rest of the solution was incubated at 4 °C for 1 h on a thermomixer (Eppendorf) set to 1000 rpm ...
-
bioRxiv - Molecular Biology 2020Quote: ... Cell debris was removed via centrifugation at 13,000g for 1 hour at +4°C (Eppendorf 5810r centrifuge). A 1 ml HisTrap FF Crude chromatography column (GE Healthcare ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Biophysics 2021Quote: ... The bicelle mixture (~1 mL) was centrifuged (13,400 rpm, Eppendorf F45-12-11 rotor, 4°C, 30 sec) to remove insoluble debris and the supernatant concentrated to ~200 μL using a 0.5 mL 10 kDa MWCO centrifugal filter (Amicon ...
-
bioRxiv - Cell Biology 2022Quote: ... The mixture was shaken for 1 hour at 4°C and 1400 rpm in a Thermomixer (Eppendorf, Germany). The samples were spun down at 14000 rpm ...
-
bioRxiv - Molecular Biology 2024Quote: ... with shaking at 1,200 RPM and 4° C for 1 h using a temperature-controlled Thermomixer 22331 (Eppendorf). The beads were pelleted at 500 x g for 1 min and the supernatant removed to become the unbound fraction ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Developmental Biology 2021Quote: ... diluted 1:250 in 500ul PBSFBT either ON or for 2h at 32°C in a heating block (ThermoMixer C, Eppendorf) with integrated shaking (350rpm) ...
-
bioRxiv - Cell Biology 2019Quote: ... The resin was pelleted down by centrifugation at 4°C at 1258 g for 5 min (Eppendorf #A-4-81 rotor) and washed with 25 ml ice-cold binding buffer [10 mM imidazole ...
-
bioRxiv - Biochemistry 2022Quote: ... The rest of the solution was incubated at 4°C for 1 hour on a thermomixer (Eppendorf, Hamburg, Germany) set to 1000 rpm ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The sample was subsequently centrifuged for 1 h at 11,000 x g at 4°C in an Eppendorf tabletop centrifuge 5810R (Eppendorf). The phage pellet was resuspended in 400 μl DNAseI buffer (10 mM Tris-HCl ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Genomics 2022Quote: ... The beads were then incubated 1 h with the anti-Myc antibody (9E10) at 4°C (Eppendorf ThermoMixer, 1,300 rpm), washed three times in PBS/0.1 % BSA and two times in lysis buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1 mM D-L methionine) for 1 h at 4° C with shaking at 1400 rpm in a benchtop thermomixer 22331(Eppendorf). The beads were washed twice with binding buffer without soybean trypsin inhibitor and suspended in 50 % v/v binding buffer ...
-
bioRxiv - Evolutionary Biology 2024Quote: 15mL of a Salten solution (1011 PFU/mL) was distributed into 1.5mL polypropylene tubes and centrifuged for 1 hour at 16,000g at 4°C (Eppendorf Centrifuge 5415R). Pellets were resuspended in 100µL of 100 mM of ammonium acetate (NH4-CH3CO2 ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 × g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Bioengineering 2020Quote: ... and microbubbles were isolated by 4 centrifugation wash cycles at 40 relative centrifugation force for 1 min (Eppendorf 5804, Hamburg, Germany), where the infranatant was discarded and the microbubble concentrate was saved and resuspended.
-
bioRxiv - Bioengineering 2023Quote: ... Cells were stained for 1 hour at a temperature of 4°C with shaking at 600 rpm in a Thermomixer comfort (Eppendorf, Germany). Stained cells were washed with ice cold FACS buffer twice before resuspension in FACS buffer for analysis ...
-
bioRxiv - Microbiology 2024Quote: ... The crude EV fractions were prepared by ultracentrifugation (45,000 rpm, 1 h, 4°C; S50A rotor, Himac Ultracentrifuge CS100GXII; Eppendorf Himac Technologies) of the thus prepared supernatants.
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Immunology 2021Quote: ... lifted cells were centrifuged at 15,000g for 5 minutes at 4°C (Eppendorf 5430R). Cell pellets were placed at −20°C overnight with 60 μL SDS Lysis buffer (1% SDS ...
-
bioRxiv - Genomics 2019Quote: ... in PBS) and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 µL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Immunology 2022Quote: ... 20 μL of mAb solution was added to the cells in the filter wells and the cells were incubated for 1 h at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). After the incubation ...
-
bioRxiv - Microbiology 2023Quote: Liquid samples in 1 ml were collected and centrifuged for 20 min at 21 130 × g at 4°C (Centrifuge 5424 R; Eppendorf, Hamburg, Germany). The supernatants were used for chemical analyses by applying external standards for calibration and quality control ...
-
bioRxiv - Physiology 2020Quote: ... 1% Antibiotic-Antimycotic] in a 5% CO2 incubator (Galaxy 170R, Eppendorf) at 37°C ...
-
bioRxiv - Biochemistry 2023Quote: ... The samples were then digested for 4 h at 37°C (1000 x rpm for 1 h, then 650 x rpm, Eppendorf ThermoMixer®C). Samples were then diluted 1:1 with milliQ water ...
-
bioRxiv - Cancer Biology 2023Quote: ... at 4°C for 1 hour and centrifuged at 4°C at 14200 rpm for 50 min using a refrigerated table-top centrifuge (Eppendorf Centrifuge, Hamburg, Germany). The cleared lysates were loaded on wells of 96-well single-use filter micro-plates with 3 µm glass fibers and 25 µm polyethylene membranes (Agilent ...
-
bioRxiv - Biochemistry 2020Quote: ... The solution was centrifuged at ~3220 g for 5 min (Eppendorf #A-4-81 rotor) to pellet down precipitated dyes ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf, RRID:SCR_018092). Nuclei were resuspended in 500 µL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Microbiology 2019Quote: ... centrifuged at 3000 × g for 5 min at 4°C (Centrifuge 5424, Eppendorf, Hamburg, Germany), and frozen at −20°C for bacterial DNA extraction ...
-
bioRxiv - Neuroscience 2023Quote: ... The 1 ml of PBS with the resuspended cells was transferred to a 1·5 ml Protein LoBind tube (Eppendorf), centrifuged at 3000 x g for 6 min at 4 °C ...
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Bioengineering 2023Quote: ... MPCs were washed twice for 3 min at 400 RCF at room temperature with PBS supplemented with 1% glucose and 1% pen-strep (Eppendorf 5702R, Hamburg, Germany). Biotinylation of the cell surface was performed by adding 1 mM Sulfo-NHS-LC-Biotin (Thermo Fisher ...