Labshake search
Citations for Eppendorf :
1 - 50 of 740 citations for 7 METHOXY 4 4 DIMETHYL 3 4 DIHYDRO 2H NAPHTHALEN 1 ONE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 7000 RPM for 7 min at 4 °C (Eppendorf model 5804R). The supernatant was discarded ...
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Physiology 2022Quote: ... plasma was spun at 4°C (4 min, 4000g force, Eppendorf 5804R, Mississauga, ON), decanted and stored at −80°C for subsequent ELISAs ...
-
bioRxiv - Bioengineering 2019Quote: For extract preparation each 4 mL of cell cultures from tp 48h of HDC run 1 were spun down for 10 min at 4000 g and 4 °C (Centrifuge 5804R, Rotor A-4-44, Eppendorf). Pellets were resuspended in fresh 1 mL ‘thylakoid buffer’ (50 mM HEPES-NaOH ...
-
bioRxiv - Physiology 2023Quote: ... for 1 h at 4 □ on a ThermoMixer C (Eppendorf), 350 µl of water and 250 µl of chloroform were added to the mixture to induce phase separation ...
-
bioRxiv - Neuroscience 2020Quote: ... and rotor (Eppendorf #S-4-72). Upon end of centrifugation ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). Proteins in the clear supernatant (protein extract ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). 15 µg of recombinant FAMOSS-streptavidin/streptavidin was added to supernatant and incubated 1h on ice with rotation ...
-
bioRxiv - Synthetic Biology 2024Quote: ... in a MasterCycler RealPlex 4 (Eppendorf). Each 20 μL qPCR reaction contained 90 ng of cDNA ...
-
bioRxiv - Biophysics 2023Quote: ... with a micromanipulator InjectMan 4 (Eppendorf). The injection needles Femtotip II (Eppendorf ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Genomics 2023Quote: ... and centrifuged at 3,200 g and 4°C using a swinging-bucket rotor (Eppendorf A-4-81) for 5 mins ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Cell Biology 2019Quote: ... The lysate was centrifuged at 4°C at 3220 g for 15 min (Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Immunology 2020Quote: ... (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Cell Biology 2021Quote: ... in a Realplex 4 PCR machine (Eppendorf), and values were normalized to rpl-32 as an internal control ...
-
bioRxiv - Biophysics 2022Quote: ... and a micro-manipulator (Injectman 4; Eppendorf). Injection pipettes were prepared from siliconized (Sigmacote ...
-
bioRxiv - Cell Biology 2023Quote: ... in a realplex 4 qPCR cycler (Eppendorf). To calculate the relative mtDNA levels ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Microbiology 2021Quote: ... The samples were immediately cooled on ice and centrifuged for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The cell pellets were stored at −20°C until RNA extraction.
-
bioRxiv - Microbiology 2021Quote: ... The cells were transferred into anaerobic 50 mL reaction tubes inside the anaerobic chamber and harvested outside of the anaerobic chamber for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The supernatant was discarded inside the anaerobic chamber and the pellet was resuspended in fresh RCM medium to an OD600 of 5-10 ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Cell Biology 2022Quote: ... and InjectMan®4 micromanipulator (Cat#. 5192000035, Eppendorf) using external continuous pressure ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Cell Biology 2019Quote: ... The resin was pelleted down by centrifugation at 4°C at 1258 g for 5 min (Eppendorf #A-4-81 rotor) and washed with 25 ml ice-cold binding buffer [10 mM imidazole ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C for 10 sec (5424-R Eppendorf microfuge) and the pellet was resuspended with 400 μl TES Solution (10 mM Tris-HCl ...
-
bioRxiv - Biophysics 2021Quote: ... 20°C for 4 hours (Thermomixer 5355 R, Eppendorf). After incubation ...
-
bioRxiv - Molecular Biology 2022Quote: ... Reactions were performed in a Realplex 4 Thermocycler (Eppendorf) using the following program ...
-
bioRxiv - Immunology 2024Quote: ... on a MasterCycler EP Realplex 4 thermal cycler (Eppendorf) in 96-well-plate format ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Neuroscience 2020Quote: ... for 30 min at 4°C on centrifuge (Eppendorf #5804R) and rotor (Eppendorf #S-4-72) ...
-
bioRxiv - Cell Biology 2022Quote: ... Microneedles were manually controlled with an InjectMan 4 micromanipulator (Eppendorf). The compensation pressure set on the FemtoJet was 35hPa for the whole injection experiment to avoid damages on cells ...
-
bioRxiv - Biophysics 2022Quote: ... The probe was controlled with a micromanipulator (Injectman 4; Eppendorf) and mounted on an inverted epifluorescent microscope.
-
bioRxiv - Microbiology 2023Quote: ... The supernatant was centrifuged (Eppendorf 5810R, A-4-62 Rotor) for 10 minutes at 500 x g to separate the remaining blood cells from the plasma.
-
bioRxiv - Molecular Biology 2024Quote: ... followed by high-speed centrifugation (4°C, 12000rpm, Eppendorf, 5424R) for 20 minutes to collect the protein supernatant ...
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Biochemistry 2022Quote: ... 0.01% Tween 20) for 1 h at 4 °C and 1200 rpm in a thermomixer (Eppendorf). Unbound protein was removed by washing 2x with high salt buffer (50 mM HEPES pH 7.5 ...
-
bioRxiv - Physiology 2019Quote: ... The remaining homogenate was heated for 10 min at 70°C and spun for 3 min at top speed at 4°C (Eppendorf 5415R). The supernatant was transferred to a new tube and heated for 10 min at 70°C ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...